Why isn't Adobe Captivate part of the CC subscription? Can it be added to the suite?

I Recently purchased a subscription for  CC, and honestly I just found out about Captivate. This is what I really need. Why isn't it includes with the subscription? It seems odd not to include it.

This is an open forum with "some" Adobe staff participation, requests below
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests

Similar Messages

  • Why isn't adobe reader opening? Please answer question as fast as possible.

    Why isn't adobe reader opening? Please answer question as fast as possible.

    Well the app must have worked at one point if you have important data in it. Maybe you should seek help on the Adode Reader for iOS web site.
    http://forums.adobe.com/community/adobe_reader_forums/ios
    Have you rebooted the iPad and then tried the app again? Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

    I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
    "The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
    There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
    Specs:
    Windows 7 Pro
    Captivate Version 6.1.1.240
    Intel Core i5 25-20 CPU @ 2.5 Ghz
    4 GB RAM
    32-Bit Operating System
    If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
    Thanks,
    Jon

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
    Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
    Also what operating system you have on your system?
    Thanks!
    Shekhar

  • Adobe Captivate 5.5 Month - Month Subscription Plan

    Hi Can someone please provide me complete details of the Adobe Captivate 5.5 Month - Month Subscription Plan?? How does it work? After the completion of the month does it still provide options to upgrade/move to yearly subscription plan/purchase another months subscription?
    We currently have Adobe Captivate 4.
    Also we currently have project that is half completed using Adobe Captivate 4. We wish to complete it using Adobe Captivate 5.5 (leverage the additional object animation options available). An Adobe Captivate 4 file will open smoothly in Adobe Captivate 5.5 right? without any loss of information/formatting etc.

    Yes, I do. I will upload it soon. Please bear with me.
    Subra

  • I have Elements 12. I can not use the "zoom burst effect". I the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part og´f the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

    I have Elements 12. I can not use the "zoom burst effect". In the programe I can ad zoom burst and the picture gets blured as it should. But the moment I try to sharpen part of the picture the whole picture imidiatly gets sharp. What is wrong?

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • The alias "Harddisk" can't be opened because the original item can't be fou

    Hello all,
    I have a very scary problem. My external 1.5 Tb Toshiba does not connect anymore. I used to have it connect to my MacBookPro through the Airport Extreme USB connection. Then I wanted to delete a folder, earlier today, and ever since, the harddisk will not mount correctly. That is, every second or third time I click on the alias (in the left area of the Finder Window), it will open and show me the files. I also successfully managed to delete some other files and folders. But, the folder in question caused Finder to start relaunching again and again and again. The only solution was to force the computer to restart, as the Relaunching Finder through CMT-CTRL-ESC didn't bring anything.
    I then disconnected the Toshiba from the Airport Extreme, and connected it directly to my MBP. The computer understands that the harddrive is connected, the harddrive sounds and behaves completely normally, and Disk Utility claims everything is okay. Data Rescue 3 claims I deleted some folder in the year 2076, on this very date, 8th May (which in 2076 is a Friday, apparently). I don't know if that has something to do with it?
    But the MBP won't let me access the harddrive. I click on the alias to the left (or double-click on the disc icon on my Desktop) and the message in the subject above will appear: The alias 'Airdisk' can't be opened because the original item can't be found".
    If I choose to Delete Alias, the following message appears: The Item "Airdisk" can't be moved to the Trash because it can't be deleted.
    I I choose to Fix Alias, the standard window in which I can find the normal path appears, causing a loop, since I will get the same message when I click on the disc icon again...
    Clicking OK doesn't bring anything. Nothing opens, and I am in the path I was when I started the clicking.
    Spotlight works wonderfully. I can search for data on my Toshiba, Spotlight will find it, but there is no link in the bottom part of the window. I can't even Open Enclosing Folder, through right-clicking on any resulting file in Spotlight.
    But the Harddrive is well and active.
    Does anyone please, please have any idea what I can do to make it behave normally again. And not least how to get rid of that folder.
    Please don't tell me I have to reformat it...please?

    Thanks for the reply.
    I did what you said and can confirm that there is a link to the hard drive under /Volumes/. However, where the links to my two partitions will take me directly to the partitions (Apple and Bootcamp), the Toshiba one will only show a Preview stating the Size of the disk (which incidentally, it states as being the size occupied.
    I tried deleting this Alias, but do not have the permission: "The operation can't be completed because you don't have permission to access some of the items".
    So I went back to Computer, got Info on the Toshiba and tried changing the Sharing & Permissions. Currently I have custom access:
    admin: Read & Write
    system: Read & Write
    Erik (Me): Read & Write
    everyone: Read only
    I used to also have (I deleted it):
    wheel: Read & Write
    I also made Erik (Me) the owner of the disk. I also tried ticking and unticking "ignore ownership on this volume".
    On my internal harddrive, Get Info states that I can "read and write". Nothing about Custom Access.
    In Disk Utility, when selecting my Airdisk (the only partition under 'Toshiba', there are apparently No owners enabled, and I am not allowed to verify or repair permissions under the First Aid tab.
    I notice this, because my internal (Apple partition) does have Owners Enabled and I am allowed to Verify and Repair disk permissions.
    Any ideas?
    I can unmount it and mount it, but still no difference.

  • The alias "Lacie2" can't be opened because the original item can't be found

    A very strange problem just developed. I have a Time Capsule with two external drives attached to it (they are actually two drives in a single enclosure) via USB. When I navigate to the drives, an alias is placed on the desktop. When I click on the alias, I get the message, "The alias “Lacie2” can’t be opened because the original item can’t be found." (I get the same message for the other drive, "Lacie1"). Now, here's the kicker: when I navigate through to the drives in a Finder window, everything is fine! I can access the drives and all contents. I do NOT get this same problem when I navigate to the Time Capsule itself, i.e., the alias placed on my desktop to the TC works fine when clicked. One more bit of information, the enclosure containing the two apparently misbehaving drives accidentally came unplugged a few days ago, so the drives spun down without being unmounted, etc. However, I don't use the drives every day, so I am not even sure they were mounted at the time. Also, I can't be certain this current problem started IMMEDIATELY thereafter, again because I don't access the drives every day and just can't remember.
    I have opened "Volumes" and cleaned out all the ghost/phantom drives in there, and it did not help (none of the ghosts referenced either of these drives). In case it makes a difference, I am booting the 64-bit kernel. Any ideas?

    I checked /Volumes again, but no ghost drives. When I select one of the aliases on the desktop and enter command+i, here is what the "server" field says in the popup:
    afp://Time Capsule Kay.afpovertcp.tcp.local/Lacie2
    When I open a finder window and navigate to the drive, here is the path to one of the folders there:
    afp://Time Capsule Kay.afpovertcp.tcp.local/Lacie2/Steve
    I don't know if this makes any difference, but when I mount that same drive on my G4 running OS X 10.4, the path is different:
    afp://Time-Capsule-Kay.local./Lacie2
    The G4 has always been plugged into the TC that the drives in question are also plugged into. Until recently, the MacBook Pro that is giving me the problems connected to my network via AirPort. It is now connected via Ethernet, plugged into an AirPort Extreme which the TC feeds off of via Ethernet as well. Perhaps that's why the paths are different.

  • 2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    2006 iMac running 10.4 OS. I copied files to ext. drive. Put in 10.6 disc and did a clean install (format) of 10.6. Copied data from ext. drive back to Mac. I didn't get all the files. CAN I REVERT BACK TO THE 10.4 OS SO I CAN COPY MY DATA PROPERLY?

    How did you copy files to the external drive, and what files did you copy? Did you drag and drop in the Finder? Use a clone utility? What files did not successfully copy?
    If you reformatted the drive as part of your install, then you won't be able to recover any files from the drive. Reverting back to (reinstalling) 10.4 will not help you.
    Do you have a complete-drive backup of your old system?
    Matt

  • Error message: The data for filename was already added to the form

    I recently modified an existing data-collection PDF - only mod was to add some additional pull-down menu options in two fields. I went thru the Distribution wizard, tested the revised form, added the PDF to the Responses file...everything seemed fine. Next day, I distributed the revised form, and had 22 submissions. When adding the 22 submissions to the Response file, 6 or 7 bounced with the error message "The data for <filename> was already added to the form", even though that was not true. I went back, cleared all, and added one of the "bad" files to the response form. It went in OK, but I could not add another "bad one". Although several of the forms may be submitted by the same person, the data is different in all of the submissions, plus, we've been doing this procdure for over a year and never had an issue until now.
    The original form may have been created in Acrobat X, and I have Acrobat 9 Pro. Not sure if that is part or all of the answer. Thanks for any insights...I saw a posting in the Reader side, but I can't see any answers.

    Hi
    According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
    Change Data Source dialog. If not, you need to install
    SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
    Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
    http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
    However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, you can review the following link:
    Working with SQL Server Compact in Visual Studio：http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
    Thanks
    Lydia Zhang

  • I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

    I have bought the CS5 but can not find serialnumbers for the whole suit. Only for PS.

    Hi,
    Which CS5 suite have you purchased?
    This document has guidelines on locating your serial number depending on the mode of delivery of your purchase:
    Find a Serial Number
    You also mention that you are able to locate the serial number for Photoshop. Did that come as a part of the suite or did you purchase Photoshop as a standalone application?

  • If I strip down my mac and replace the operating software can I re install my creative suite on this cleaned up machine ?

    If I clean down my mac and re install the operating software can I re-install my creative suite for Adobe Cloud form my licenses?
    thanks for any help
    Robert

    Sign out of the Cloud to deactivate and then install later just like you did the first time
    http://www.adobe.com/products/creativecloud/faq.html
    http://helpx.adobe.com/creative-cloud/help/install-apps.html
    http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
    what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
    Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

  • Problem with Pages.  I have recently been unable to open Pages, or any documents from Pages on my iMac.  Pages seems to be in the Cloud and can open a list of the documents in Pages, but can't open any of those documents.

    Recently unable to open Pages or any documents therein.  It seems to be stuck in the Cloud.  Although I can open a list of the documents I can not open any of the documents. 

    The answer is simple...  If you want to remedy this, then don't save them as PDFs.
    Word opens Word and text documents.  Not PDFs.
    Also note that this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office or your question in any way. If you have issues or questions about Office, it's probably best you post Office related questions on Microsoft's own forums for their Mac products.
    http://www.officeformac.com/productforums

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

Maybe you are looking for