Why isn't Disk use working??

I enabled my iPod for disk use to put notes on it but the notes don't show up on the iPod. The files show up but when I select them nothing comes up on the screen. Is it because I'm using Windows or Word documents? If somebody knows the answer to my problems please let me know.
Thank you!
~random_stephanie~

Take a look at this link and it should clear up any problems you are having
http://docs.info.apple.com/article.html?artnum=93951

Similar Messages

Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?

Why isn't remember me working on sites that I have been using for years on my iPad but fine on my iPhone?
Both have recently been updated with IOS7

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why isn't AE CC working on Mac OSX 10.9.1?

Why isn't AE CC working on Mac OSX 10.9.1

> ANd where in the heck do you get it if not through the "official" tool?
Manual downloads of our updaters are available from our website. Follow the links here:
http://blogs.adobe.com/aftereffects/2013/10/after-effects-cc-12-0-1-update-fixes-crash-on- mac-os-x-v10-9-mavericks.html

Why isn't my itunes working?

Why isn't my itunes working?

itunes on ios or on a computer?
does it provide you with some sort of error msg?

TS4268 Why isn't my iMessage working?!

Why isn't my iMessage working?!?

go on settings and scroll down to "MESSAGES" make sure iMessages is ON, now scroll down just a bit and look for an option reading "send & Receive" click on it and make sure it is either your apple ID or your phone number, wait 1-3 hours or over night and it should work, sometimes it takes a while to activate, ive come across this issue many times, hope it worked!

Why isn't the apogee working

Downloaded new version of garage band and now my apogee isn't working

webmail-user wrote:
I get annoying spam in the Spam Detector from a sender that I will refer to as XYZ for this question. Using Settings/Email Settings/Filters, I added a new filter "If From Contains XYZ delete" and saved the new filter. Today I got another spam in the Spam Detector from the same XYZ sender. Why isn't the filter causing this email to be automatically deleted? Thanks for any suggestions.
I think that the Spam Detector runs before your custom filters, and custom filters only work on the inbox folder. If Spam Detector moved it from the inbox before the filters were run, then the filter wouldn't delete it.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Why isn't the filter working?

I get annoying spam in the Spam Detector from a sender that I will refer to as XYZ for this question. Using Settings/Email Settings/Filters, I added a new filter "If From Contains XYZ delete" and saved the new filter. Today I got another spam in the Spam Detector from the same XYZ sender. Why isn't the filter causing this email to be automatically deleted? Thanks for any suggestions.

webmail-user wrote:
I get annoying spam in the Spam Detector from a sender that I will refer to as XYZ for this question. Using Settings/Email Settings/Filters, I added a new filter "If From Contains XYZ delete" and saved the new filter. Today I got another spam in the Spam Detector from the same XYZ sender. Why isn't the filter causing this email to be automatically deleted? Thanks for any suggestions.
I think that the Spam Detector runs before your custom filters, and custom filters only work on the inbox folder. If Spam Detector moved it from the inbox before the filters were run, then the filter wouldn't delete it.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Why isn't the iMessage working on my phone? Up until 1:45pm today it was fine, but now it isn't working.

Why isn't the iMessage on my iPhone 4s working? Up until about 1:45PM today it was working just fine but now it sends it as a text message. I have tried everything in the setting but it still is not working. Any tips would be great! Thanks!

It should be back up now, they had a system outage. Reset your iPhone.

A Long and Involved "Why isn't my iPod working?"

Hoooookay, so...
My iPod is having problems. It's a second gen, but I did get the battery replaced about 9 months ago so I'm still ok on that front. Here's my problem:
I haven't used it in a while (since before the iTunes 7 update), and while trying to plug it in to my PC via Fire wire, it started syncing up with iTunes 7. It said something about needing to restore it, so, rolling my eyes I clicked the "Ok, erase all my music and restore my Ipod" button.
Unfortunately, during the "restore" I got a little error message that said it messed up. "Frick," I said aloud. So I figured, it must be something with the PC or iTunes. I shut down my compy to try again. Unfortunately, my iPod was completely frozen in the process and stayed that way for about a day. I figured it ran out of batteries, so I plugged it back in and it seemed to be working fine. However, restore had notably done its job, meaning all of my songs were erased.
So I plugged it back in, and I got no dice. This time iTunes just ignored it completely. So I downloaded and installed v.7.02 to alleviate the situation. Once again, no dice. Now my iPod and computer are acting altogether very strange. I have over the course of this difficulty restarted and started my ipod many times, but an interesting thing happens. After I've restarted it, and I plug in my iPod, if I have iTunes up, iTunes merely freezes for about 3 minutes, then unfreezes showing no iPod. Windows recognizes the iPod as some sort of drive/media player, calling it drive F:. When I ask windows to safely remove my ipod, it does, but my ipod just freezes like it did last time. Fortunately, in the course of my investigation, i learned how to reset it, and that seems to get it out of freeze mode. However, when I re-plug it in, my computer makes a "ba-ding" sound, as if it recognized it, but it shows up nowhere. No windows drive, no nothing, just a ba-ding sound. If I restart my computer, it will recognize the ipod as a drive again (the first time I plug it in) but anytime after that it just makes the noise and doesn't recognize it at all...
Help?
HP Dv4000 Windows XP

First
Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Change your iPod drive letter
http://docs.info.apple.com/article.html?artnum=93499
Reconnect it with your PC, open iTunes and click Restore.
If still does not solve then
. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

Why does the disk not work anymore in my mac?

I've been using the same two discs to revise for my driving theory test in the same MacBook Pro and never had any problems. Now today, suddenly it has decided to stop working, both of them. When I click the icon to open the application and go through the normal steps it says there's an error. I put the disc back in after taking it out and just waited to see if the application would open itself and my comptuer just ejects the discs. I really don't understand why this is happening because this has never happened before and before you ask, yes both discs are clean and neither are scratched.

Try restarting your Mac and try again.
If that didn't help, startup in Safe Mode
A Safe Mode boot takes longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple menu then try the discs.
Safe Mode clears system caches that may help.

Why isn't Disk Utility clear after "Repair Disk Permissions"?

Having used my computer for several days I decided to use Disk Utility to “Repair Disk Permissions” after a few hours of use.
2008-11-29 08:30:17 -0800: Disk Utility started.
2008-11-29 08:30:24 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 08:30:24 -0800: Reading permissions database.
2008-11-29 08:30:24 -0800: Reading the permissions database can take several minutes.
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800: Permissions repair complete
2008-11-29 08:48:28 -0800:
2008-11-29 08:48:28 -0800:
I shut down the computer, turned off its power for 1 minute and restarted. I initiated Disk Utility once again.
2008-11-29 09:16:42 -0800: Disk Utility started.
2008-11-29 09:20:55 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:20:55 -0800: Reading permissions database.
2008-11-29 09:20:55 -0800: Reading the permissions database can take several minutes.
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800: Permissions repair complete
2008-11-29 09:38:49 -0800:
2008-11-29 09:38:49 -0800:
When Disk Utility was finished, I clicked on “Clear History” and reran “Repair Disk Permissions.”
2008-11-29 09:42:01 -0800: Repairing permissions for “Macintosh HD”
2008-11-29 09:42:01 -0800: Reading permissions database.
2008-11-29 09:42:01 -0800: Reading the permissions database can take several minutes.
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800: Permissions repair complete
2008-11-29 10:00:19 -0800:
2008-11-29 10:00:19 -0800:
Now everything seems clear.
My question...
Why did I initially see:
2008-11-29 08:43:29 -0800: Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
2008-11-29 08:48:26 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and why after restarting should I end up with only
2008-11-29 09:38:47 -0800: Group differs on "private/etc/cups", should be 0, group is 26.
and after “Clear History” and rerunning Disk Utility why is everything clear until I start using the computer again?
I’ve had it explained that “Group differs on "private/etc/cups", should be 0, group is 26” is not meaningful, but I’d like to know WHY it happens. I’d also like to know why “ Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .” initially appears.
Thank you,
ZTIWYM3ZUI

As a casual "Apple Discussions" user it hadn't occurred to me that if a question had been answered previously, it should never be asked again.
It's not that. It's because the problem's been beaten to death over the past fourteen months, since Apple shipped Leopard, that most consider it common knowledge, no matter where one's been visiting or how often. Every Apple/Macintosh related website has addressed the never ending issue. Finally, since the forums Help file says:
*I have a question or issue—how do I search for answers?*
+It's possible that your question or issue has already been answered by other members so do a search before posting a question. On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
+You can also refine your search by using the options in the Search Discussions Content pane. Click the Search Tips link for help with our search features. You can streamline your results by restricting your search terms by category or forum, specifying a date range, or searching for posts by username. You can also search the User Tips Library.+
Maybe that should be retitled: *+I have a question or issue—how do I resolve it?+*
Just out of curiosity, I wonder if any of these exceptional people can figure out my signature.
ZTIWYM3ZUI - "time is what you make—use it" or something of that nature.

Why isn't my animation working on my Volusion web page?

Hi, first time poster, and new to Adobe Edge Animate.
So I can't figure out for the life of me why my animation won't display at all when I put the code snippets into my sites HTML file.
I'm using the e-commerce website called Volusion. This is what I've done:
1. Created, tested (by pressing CTRL+Enter to preview in browser) and published my animation onto my desktop.
2. Uploaded the files via FTP (Cyberduck) to Volusions directory.
3. Inserted the following code snippet between the <head> tags of Volusions HTML file:

    <script type="text/javascript" charset="utf-8" src="animated_nav1_bounce_normal_hover_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-22390483 { visibility:hidden; }
    </style>

4. Inserted the following <div> into Volusions HTML file where I want the animation to display:
<div id="Stage" class="EDGE-22390483"></div>
5. Refreshed the Volusion web page -- and that's where I'm lost, nothing happens, nothing appears. I don't know what I'm missing except that maybe I'm not uploading the files into the right directory in the FTP? Though I've tried uploading them in several different folders of the directory, I still cannot find a solution.
The site I'm working on can be found here: http://www.globaldirectparts.com/default.asp
The animation I've created is supposed to replace the two navigation menus at the top of the page.
I've been racking my brain for 3 days trying to figure this out, so any help would be greatly appreciated. Let me know if anyone needs additional information. Thanks!

Sorry, I'm new to all of this, learning-by-doing really. So if I understand you correctly, this is what I put:
<iframe src="http://globaldirectparts.com/JFlores_2142/animated_nav1_bounce_normal_hover.html"><div id="Stage" class="EDGE-22390483"></div></iframe>
And now my web page displays a little box with a "page cannot be found" message inside it.
I also tried:
<iframe src="/v/template_208.html"><div id="Stage" class="EDGE-22390483"></div></iframe>
And that gave me the same box, but with my entire homepage scrunched up inside it, which I understand why that happened, but I don't know exactly what html address I'm supposed to put in the iframe.

Why isn't my password working for the app?

Hi, Isn't the password the same for the skype account (in a browser) and the VoIP application the same? I can log in and check my subscriptions, credits, and etcetera but CANNOT use the same passoword with the user name in the application. What am I doing wrong? Best, Ben

Just reset the TC and start over with a fresh clean setup.
This will not harm any backups or anything on the hard disk.
What version TC is it?
Mavericks is causing loads of problems.. I would be pointing the finger there.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Why isn't my iMessage working? Is something wrong with my iPhone?

I can't use iMessage. What is going on?

Here's why it's not working: http://www.apple.com/support/systemstatus/
Don't worry

Why isn't my iMessage working or FaceTime I have wifi but it's still not been working all day

My iMessage has stopped to work was working fine until today then I tried FaceTime and that isn't working to does anyone know why I've not touched the setting on my iPad at all . I have wifi too so can't be that.

I'm having the same issue as well. So strange. All my messages are being sent as SMS and not the blue iMessage to all my friends that have iOS devices.

Why isn't Disk use working??

Similar Messages

Maybe you are looking for