Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

Similar Messages

  • TS1424 How do you fix a R6025 pure virtual function call error?  When I try to search for music, iTunes freezes & returns this message.

    How do you fix a R6025 pure virtual function call error?  When I try to search for music, iTunes freezes & returns this message.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Why can't I connect to iTunes Store when I try to purchase an application?

    Why can't I connect to iTunes Store when I try to purchase an application?

    Hi marlonwanawan,
    If you are having issues connecting to the iTunes Store, you may find the following article helpful:
    Apple Support: Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    - Brenden

  • My ipad2 says it can't connect to iTunes Store when I try to download something. I could do this a few days ago but not now. Anyone know why?

    My ipad2 says it can't connect to iTunes Store when I try to download something.  I could do this a few days ago but not now. Anyone tell me why?

    Try signing out then back in. Try again.

  • Why do I receive the message "this apple ID had not been used in itunes store " when  I try to install an appliance.

    Why do I receive the message "this Apple ID had not been used in itunes Store" When I try to install an appliance

    Unless the instructions on this page are followed when creating an account : http://support.apple.com/kb/HT2534
    then credit card details will need to be entered before the account can be used to download any item from the store.
    You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054
    If not then you will need to enter credit card details (which you should be able to remove after entering them) or create a new account

  • Why do I see "this Apple ID has not yet been used in iTunes Store when I try to download any apps?

    Why do I see message "this Apple ID has not yet been used in iTunes Store when I try to download some free apps? Please let me know how to resolve this

    Hey Maniopr,
    I would try out the information in the following article to sign in:
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/HT2589
    Welcome to Apple Support Communities!
    Cheers,
    Delgadoh

  • My IPad says "cannot connect to iTunes store" when I try to update

    My IPad says "cannot connect to iTunes store" when I try to update apps.  How can I resolve this?

    I had the same problem and tried absolutely everything...on my own and stuff I'd read on-line.  Nothing worked.  What finally did was this.  I held down an app until all started jiggling.  Then I deleted one of the ones that needed updating.  Then pushed the round button at the bottom of the iPad to stop the movement.  Then went to the "Featured" section of the App Store.  In the search box (top right corner) I typed in the name of the app I'd just deleted.  When it pulled up, I chose "Install".  Worked perfectly.  I went through this process, one-by-one, until I got all of them done.  Now, everything is updated. 
    Sure hope this helps you and hope this isn't the new norm for how to do updates.  I used to just select "Update All", entered my password, and the updates started happening. 

  • HT204266 I have a iPod touch 4 and updated the iOS 6 and always when I try to search for an app in the App Store it won't let me because it always exits the App Store. Why is this happening?

    I have a iPod touch 4 and updated the iOS 6 and always when I try to search for an app in the App Store it won't let me because it always exits the App Store. Why is this happening?

    Have you tried resetting and restoring your iPod?

  • HT4623 My iphone 5 gives me message "Cannot Connect to iTunes Store" when I try connecting to iTunes. Anyone who's had a similar problem? How did you resolve?

    My iphone 5 gives me message "Cannot Connect to iTunes Store" when I try connecting to iTunes. Anyone who's had a similar problem? How did you resolve?
    I am seeking help urgently.
    Paul, Mombasa, KENYA.

    You need to have a data connection. Tap Settings App > General > Reset > Reset Network Settings. Then in Settings App make sure Data is ON, or if you want make sure WiFi is ON.

  • After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.

    After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.
    How do I fix this on my iPhone 4S?

    Same phone and ios, same problem. Worked just fine for me Sunday, but nothing today, all day. As a workaround I found I can still connect using iTunes on my Macbook Pro, the I synch my iPhone. There are way too many people with the same problem for it to be anything but Apples problem. Hope this helps.

  • It's says Can't connect to iTunes store ,when I try from my IPad!?

    I  It's says Can't connect to iTunes store ,when I try from my IPad!?

    Try signing out then back in. Try again.

  • My iPhone says cannot connect to iTunes Store when I try to make an in app purchase. What do I do?

    My iPhone says cannot connect to iTunes Store when I try to make an in app purchase. What do I do?

    I have also this problem iam trying to purchase gems but i have message says cannot connect to itunes stores then another msg purchase failed

  • Why does the App Store on my iPod kick me out when I try to search for an app?

    The App Store on my iPod touch keeps kicking me out when I try to search for an app or when I go to genius. I updated to ios6 today and this hasn't happened before. What can I do?

    I have the same problem on my iPod Touch 4 (IOS6).  My iPhone 4S (IOS6) works fine.  But the App Store crashes when I hit the Genius bar in App Store.  Apparently other folks are having this same problem.  I've rebooted, but that doesn't help. 

  • Why does Safari go into limbo when I try to search for some things?

         Why does Safari go into limbo when I try to search for some things? I start to enter something in the search window. I get a drop down with suggestion I choose one and it pops up in my search window but just turns a color and does nothing!
        If I quit Safari and bring it back up, then enter the exact same line it's fine. This is just one of the many problems I've been
    having with Safari since I installed Yosemite.
         Has anyone got any suggestions or is anyone having the same problem. Is there a way to maybe force my MacBook pro to reinstall Safari or possibly all of Yosemite. I seem to be having a lot of problems and judging by the responses I've received (That would be None) I must be the only one having any problem at all withYosemite. Not sure what to do.
         Any help or suggestions would be great
         Ron     

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Hello everyone !  As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad it says that it's not activated, and I can't activate it using the iPad , When I plug it on my win so I can restore it using iTunes , I got to er

    Hello everyone !
    As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
    I hope you can help me.
    Thanks,

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for

  • G585 Video Streaming Problem

    Hello. I've got a Lenovo G585 that's about 4 months old. I've already had a few problems with it but they just seem to fix themselves.. But for about a month now, I go on youtube and try to stream a video, and my internet cuts off immediately! Litera

  • Lion display

    I've got an early 2009 Mac Mini and upgraded to Mountain Lion on July 26 after going to a website that used Flash Video my video display went crazy to the point I had to do a Hard Shutdown then restart. I upgraded the release (August 23 2012) hoping

  • Resource bundle not found

    Hi, I would like to know where to put resource bundle file (it is, something.properties) to be seen in portal channel and background classes more info and workabout in my class I use resource bundle class Messages which loads resources from bundle "b

  • Does the new Photo app duplicate images on import (wasting drive space), or simply reference them like Picasa does?

    Picasa simply references the original images, and any edits you make to the images leaves the original unharmed. This is the grown-up way to manage images. iPhoto and all, I really mean ALL other photo apps make this mistake of duplication of images

  • Query for printing report if field 1 = x

    Forgive me if this is the wrong place to put this, My first time on here. I want to run a query in management studio 2008r2. The query goes like this: SELECT        [Default Branch ID], [Contact Title], [Contact FirstName], [Contact LastName], [Phone