Why isn't the download for Windows 32bit not working/showing up on the download page???

I've tried multiple browsers?

They are not showing up at all in my library. They only show up under the "on this iPhone" section when the old phone is plugged into iTunes. I have tried syncing again and still no solution. The music that is missing is all from CDs that I previously imported into iTunes.
Thank you for your reply.

Similar Messages

  • The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I'm very computer literate and am pretty sure the problem is on your end.

    The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
    I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed. The serial # for 13 does not work. Any thoughts on how I can get a number for PSE 12?

    I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
    The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?

    Hi
    There is a newer version of Resolution+ Plug-in released for an Qosmio X series
    [Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
    try it out...
    If it has not been installed properly, try rebooting your computer and reverify.

  • Why isn't my back button in Safari not working? I am constantly resetting Safari.

    Why isn't my back button in Safari not working? I am constantly resetting Safari.

    Cheryl...
    Go to ~/Library/Caches/com.apple.Safari
    Move the Cache.db (or ApplicationCache.db) file from the com.apple. Safari folder to the Trash.
    Restart your Mac. Launch Safari. Try the back button.
    ~ (Tilde) character represents the Home folder.

  • I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud acount.

    I have an iPod and an Ipad and want to use FaceTime calling from the iPod to the Ipad but it does not work. I use the same iCloud accountedge

    Did you set up different email addresses for each device?
    iOS: Using FaceTime
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • Itunes 11.1.3 for windows 7 not working

    I have the same issue as the one mentioned on this page and have tried the solutions, but they have not worked for me.
    http://support.apple.com/kb/TS4123
    I've also looked at this long forum discussing the same issue, but it is about an older version of iTunes
    https://discussions.apple.com/thread/2770908?start=0&tstart=0
    The same message still hangs on my launcher, "Accessing iTunes Store", for an indefinite amount of time and it doesn't change.
    I have installed itunes on a separate Windows Vista laptop, and it has the same issue.
    The mulititude of proposed solutions in the aforementioned articles have not worked for me. What can I do, and any help is greatly appreciated

    Can you check something for me please? I'd like to try doing a "Run as administrator" on your iTunes.
    Quit iTunes first.
    In Computer, open Local Disk C: or whichever drive you have your program files installed on.
    If you have a 32-bit Windows, open the "Program files" folder.
    If you have a 64-bit Windows, open the "Program Files (x86)" folder.
    Open the "iTunes" folder.
    Right-click on the iTunes.exe file and select "run as administrator".
    Can you access the Store now?
    (Permissions issues can sometimes mimic other problems ... if that's what is going on, the "Run as administrator" thing can sometimes get past the issue.)

  • My iPod classic isn't recognized by iTunes. I plugged it in to update last night, but all music and videos were deleted from the iPod. Now when I plug the iPod into the USB for iTunes, it deosn't show up on the left side of the monitor. Any ideas why this

    When I plug my iPod classic (only three months old) into iTunes, it doesn't show up as a device on iTunes. I plugged it in to update last nightm, but all my music was erased and now it isn't even recognized. The iPod itself shows it being connected, but nothing on iTunes. Any ideas would be appreciated. eta2359

    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Hi i buy G62 but the drivers for gaming is not working properly is there a way that i can download

    My gaming driver is not working properly Im using a ATI MOBILITY RADEON HD 4200 how can i download a new driver suit to my computer and where its nposeble to download it thanks in advance.

    Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
    https://wiki.mozilla.org/Mobile/Platforms/Android
    Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
    Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
    (Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

  • HP Photosmart Plus 209a-m install for Windows 8 not working, driver problem?

    I am trying to install the driver/software for HP Photosmart Plus 209a-m on my Windows 8 laptop and keep getting "the Wizard has detected a problem with the driver software for the selected printer".  Seems like a catch-22 because that's why i'm trying to install it.  I have a brand new hard drive (as of today) with nothing else on it except Norton, which i just installed.  I shouldn't have corrupted drivers yet.  if it's missing, why can't HP get it installed?  I've downloaded hppiw and trying to install that.  after i get the "problem with the driver" message, i select the option to install the full suite + driver, and it attempts another download (why is it doing that when i already downloaded the software?), then fails with "Your download was cancelled.  You can attempt the download again by clicking Retry".  Anybody know how to get me out of this loop and get the software installed?

    hi,
    sometimes norton does block the installation or the drivers download...
    i would suggest you to turn of norton and complete the installation and then turn it back on..
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
    Although I am an HP employee, I am speaking for myself and not for HP.
    *Say thanks by clicking the "Kudos! Star" which is on the left*
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HP Help Number for Windows 7 not working

    I have a problem with my Windows 7 upgrade.  The instructions from HP say that in the US to call 1-888-447-0150.  That number answers, there is a beep and the line is cut off.
    Why is the number given in the HP instructions not working?

    Yes, it doesn't work for me either. It connects, then a very short music blip plays and it's then transferred to nowhere and disconnects.
    HP has gone to the dogs!
    My install of Windows 7 got to the last item on the list, about three quarters of the way through the install (the green bar) and has hung for about 10 hours now without a  sign of movement, and HP is nowhere to be found to help.

  • The icon for firefox is not working. "There was a problem sending the command to the program" pops up. Cannot get in to firefox

    Since the upgrade, the icon does not work. Now this message comes up. I made Google my home page by following directions on this site. I deleted the old icon as it didnt work, and this new one came up on my desktop and it presented the message above.

    Hi,
    Before you open any of the applications, please go to Task Manager to see if their processes are stuck there. If so, shut them down and try again.
    You can also try starting the applications in Safe Mode to determine if the problem is 3rd-party add-ins related.
    Please refer to this article below to learn more:
    http://office.microsoft.com/en-001/support/why-cant-i-start-my-office-2013-application-HA104011864.aspx
    As for the Excel problem 'There was a problem sending the command to the program', please note when double-clicking an Excel workbook, a
    dynamic data exchange (DDE) message is sent to Excel, instructing it to open the workbook that you double-clicked. If you
    turn on the "Ignore other applications that use Dynamic Data Exchange (DDE)“ setting,
     the DDE message sent to Excel by Windows Explorer is ignored, and Excel does not open the workbook that you double-clicked.
    To automatically solve this issue , we recommend to run “Microsoft Fix it 20074” and follow the steps in the wizard:
    http://support.microsoft.com/kb/211494/en-us
    You can also try to fix it manually by the steps under 'Let me fix it myself'.
    If the steps above don't help, we can try to repair Office from Control Panel -> Programs and Features to check the result.
    Regards,
    Melon Chen
    TechNet Community Support

  • Why isn't my itunes on my ipod not working?

    Why isn't my itunes on my ipod working?
    Whenever i try to download a app onto my ipod, (4th generation) it says "cannot connect to itunes". 

    See:
    Can't connect to the iTunes Store

  • Apple software update for windows does not work properly

    Apple software update does not work properly

    I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
    Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
    So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
    When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
    I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

  • Air Display for Windows 7 not working

    I recently installed Air Display v1.6.1 for my iPad 2 and Air Display for Windows.
    Both my laptop and iPad are connected to the same WiFi.
    Whenever I click on my iPad's name in Air Display on my laptop, nothing happens. My iPad's screen still stays on the Air Display instruction screen with no flashing of the screen as I see on YouTube videos. Any help would be appreciated .

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Isight drivers for WIndows 7 - not working?

    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W

    dwinpenny wrote:
    Hi,
    Have a new IMac and am trying to get Isight working in a Parallels Windows 7 VM environment.
    Isight works fine in Mac OS (Skye, Oovoo, etc).
    Tried to install the drivers from the Mac OS disk (appleisightinstaller.exe) and they appear to be installed okay.
    BUT, while the device exists, I cant see any picture or when I click on settings get no settings to change. Additionally, the Isight led on the device never comes on.
    Anyone got any ideas as to what I should do.
    I have tried:
    1. De-installing the driver and reinstalling
    2. Have edited the registry in Windows to delete all references
    The reason I would like to get this working is I am trying to use Polycom PVX video conferencing software (I need it for work) and so my idea was to run it in a Parallels VM as its only available for Windows.
    Hope you can help
    Cheers
    Dave W
    Welcome to Discussions, Dave (dwinpenny)
    I don't use Windows®, but here are a couple things to consider if you have not already done so and do not get better help here.
    (1) Does this help you? http://kb.parallels.com/5028
    (2) Consider XMeeting as a possible OSX alternative for connecting to your work's Polycom system:
      http://xmeeting.sourceforge.net/pages/index.php
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
    LED Cinema Display  G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

Maybe you are looking for