Why isqlplus can not login today?

Why isqlplus can not login today? I connected the database from isqplus yesterday using the same ip address and credential.
What does isqlplus depend on?
Thank you

sqlplus, listener and EM Console all work well. I guess the problem is IP address. Please see the following output:
[oracle@localhost admin]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:21:C7:21:F1
inet addr:192.168.0.107 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::213:21ff:fec7:21f1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:21189 errors:0 dropped:0 overruns:0 frame:0
TX packets:7103 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2245977 (2.1 MiB) TX bytes:744888 (727.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:222343 errors:0 dropped:0 overruns:0 frame:0
TX packets:222343 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:51901694 (49.4 MiB) TX bytes:51901694 (49.4 MiB)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:21187 errors:0 dropped:0 overruns:0 frame:0
TX packets:7200 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2330605 (2.2 MiB) TX bytes:878175 (857.5 KiB)
Interrupt:17
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:7103 errors:0 dropped:0 overruns:0 frame:0
TX packets:21189 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:744888 (727.4 KiB) TX bytes:2245977 (2.1 MiB)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
RX packets:19623 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1143152 (1.0 MiB) TX bytes:0 (0.0 b)
But the Network Configration tool shows that the IP address is 192.168.0.10 and the corresponding Host name is localhost.localdomain. The output is not same with the previous one.

Similar Messages

My question is- Why i can not login my yahoo account from yesterday?

''dupe of https://support.mozilla.org/en-US/questions/920319''
I am cooljakaria from Bangladesh.I am a freelancer.
Everyday i must use yahoo account.But i can not login my account form yesterday.As a freelancer, it is my great problem.
Google account i can login.On the otherhand,I can login my yahoo account using google crome.
Please solve my problem earlier.
Thanks
cooljakaria

Hi,
You may have to update Firefox to the latest version: https://www.mozilla.org/en-US/firefox/new/
If Firefox is up to date, please try this: '''Tools''' ('''Alt''' + '''T''') > '''Clear Recent History''', choose '''Everything''' in '''Time range to clear''' and '''Cache''' and '''Cookies''' under '''Details'''. If the problem persists you may also have to [http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default reset] the corrupt [https://en.wikipedia.org/wiki/User_agent user agent] in [http://kb.mozillazine.org/About:config about:config].
[http://kb.mozillazine.org/About:config_entries about:config Entries]

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

I can not login to Adobe Application Manager without admin privilage. WHY?

I can not login to Adobe Application Manager without admin privilege. WHY? I must run app as administrator, only this way i can login using Adobe ID.

if you are receiving an error that you do not have sufficient permissions to install the software then please try installing under a newly created local Administrator account.
A normal administrator account should not run into these difficulties so it would appear the file permissions under your current account have been damaged.
Alternately you can review your installation logs to more accurately identify where the file permission errors are occurring. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 -http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret your installation log files.
Hope this helps you.
Regards
Rajshree
Re: Creative Cloud needs Admin privileges to install
Re: Creative Cloud needs Admin privileges to install

Why I can't login to my email? They kept saying password missing.... I tried to type the correct password but they kept saying serve not found.

Why I can't login to my email fr my iPad 4 ? They kept saying password missing even though I type the correct password they still said serve not found. Thank you!

I would go into settings and take a look if the mail account settings were all set like the mail provider's guide

Why i can not find my login name in /etc/passwd?

why i can not find my login name in /etc/passwd?
Thank you~

I want to ask the same question as steve359, where the multi-user accounts information stored?
I saw mysql user in passwd, do you have any idea on what purpose of mac os ultilize mysql ?
Thanks!

I created an Apple ID on my iPhone, but I can not download any application because a message appears saying that iTunes can not login.

I created an Apple ID on my iPhone, but I can not download any application because a message appears saying that iTunes store can not login. The strange thing is that my Apple ID works perfectly when I try to access my icloud browser on my iMac and even I join this forum. I login with my ID system icloud without problems! Why can not I download applications? What relationship has between iTunes store and iCloud?

You cannot download the same Apps that you have on your iPhone. They are two seperate stores.
The store you have on your iPhone is the same for any iDevice (iPad, iPhone and iPod)
The store on your MacBook is only for Macs.

After install oracle 10g, enterprise manager web version, can not login

Hi Guru,
I have installed oracle 10g on windows xp pro sp2 successfully, can use sqlplus to connect to DB, but when using IE to login enterprise manager web version port 1158, it failed. The login page came out, but when I keyed in the right userid/password ie sysman/pwd1234, the login screen just refreshed, nothing happen. but if I purposely key in wrong userid or password, the message "invalid userid or password" comes out.
Another "interesting" thing is, I can login web version isqlplus successfully using the same userid/password. but can not connect to web version isqlplus/dba, even I use user sys, also can not login.
Need your urgent help to solve this problem.

Hi.
What does the log say?
From %ORACLE_HOME%\opmn\logs folder.
rgds
Kjell

Why I can't login to the Twitter app on my ipod?

Why I can’t login to the Twitter app on my ipod? I know my password is right but it says username or password could not be authenticated please check to make sure you entered them right. However I know I did it right. My Ipod is up to date and I have tried deleting and reinstalling the app and that did nothing.

Twitter says:
If you're seeing "Unauthorized" or "Invalid username and Password" when you try to sign in, this is likely caused by incorrect time zone settings or an outdated version of the Twitter client application. Please make sure your Twitter client is up to date with the latest version and that the date, time and timezone settings are set to update automatically.
Have you checked that? (Settings -> General -> Date & Time)

Can not login to Revel from Elements 12.

My pictures are not uploading to Revel Premium. The option to "Sign IN to Adobe Revel" on File menu from Elements 12 is greyed out...so it appears we can not login. Any ideas?

I do not know how to paste a screen print to this message. I pasted it to a Word doc but can't find a way to attach it to this message The inability to sign into revel to sync my account is just one problem I am having, not sure if that is why my pics won't go to my revel account or not. (By the way, I am not using an iPad app, I am using my Macbook Pro to sign into Revel via internet.) I was signed in a couple of weeks ago just fine and the pics still would not sync to Revel. (I read on a forum to disconnect then to shut the program down and then restart and sign in to get it to work. Ever since then it has not worked.) Before I upgraded to a paid subscription, pics would upload until I met my free # of uploaded photos. Since I upgraded to a paid account, no more will move to Revel. I have created mobile folders in Elements and Revel will show the 4 folders I have created but they are grey boxes with titles, but no pics inside. The only pics that are on my Revel site are the few I was able to load when it was a free site. No more.
I REALLY need help and have spent countless hours reading every forum, blog post, and problem solving site. Last week I chatted with adobe customer service who had me look at every setting and I apparently have every setting the way it should be to work correctly (except that now I can not sign back into Revel from Edit > Preferences > Adobe Revel -- "Sign in to Adobe Revel" option is greyed out.) They told me that I could call the help line and I would not be charged for the call because I have purchased the software. (A lie.) I called the phone number he suggested and they told me it would be a $29.95 charge for receiving any help with this matter. I told him I am not paying another $30 after I have spent $100 on the Elements software and another $60 on Revel and can't even get it to work. He suggested I chat with someone from Revel department. He walked me through to get me to the right place to chat. The new person on chat was unable to help because he was in "customer service dept." and did not have ability to help with technical problems. He said I could post my problem in the forums but since I had posted another problem 7 days before that was never answered I was reluctant. So I ask, what am I to do?? I can not get the software to work. I spent around 3 hours that afternoon trying to get help. I spent at least 5-6 hours before that trying to fix it myself by reading all the helps and "work around" solutions on the adobe site. I have since then been trying to find a way to save my pics to an external drive because my husband noticed that when on my Elements program under Help>Updates that a error message pops up that says "Adobe Photoshop Elements 12-Your application install seems to be damaged, Please reinstall the application." Unfortunately I am scared to death about losing all my hours of editing pics, organizing photos into folders that I have already done because the program will not allow me to "back-up my photos" on an external drive when choosing that option. I'm currently saving each folder to the desktop and then manually saving individually to an external drive because that is not working either. I am not sure any of this is necessary but I feel I must be prepared if I have to call and spend the ridiculous $30 to get help to finally use the software I purchased a month ago, and they tell me I must uninstall and reinstall the program. By the way, an Adobe Technician installed it for me "remotely" when it would not install the paid version after using the trial version , so if it was done incorrectly It is not my fault. I just need some help and am beyond frustrated. If I had not already sunk so many hours into editing and organizing, I would demand a refund and find another software program that actually works that also has a physical person I can talk to if I have a problem. I mean--any company should at least supply help for a short period of time to make sure it is working after installed. I am so short on time to work on this and just really need help to get this working.

Can not login to OS X Server 10.4

Hi, I'm using OX Server 10.4 with Open Directory.
I've been experiencing a strange behaviour sometimes. Every other month or so, users stop being able to login via SSH to my server.
Disabling and enabling SSH in sharing doesn't do the trick...maybe it is some ApplePasswordService issue.
I just reboot the server as I never found any way to resolve this either here or at any other site.
Today, feeling confident that it could be an ApplePasswordService issue
I've done the following:
prompt>NeST -stoppasswordserver
prompt>NeST -startpasswordserver
Didn't work either...
I reboot the server and now I can not login locally with my personal or admin account, so now it's complicated.
Booted in Safe mode (pressing shift when booting) but i get the same thing. After entering the username and password the server shows that progress colour circle spinning forever.
Booting in single user I was able to check the logs.
In /var/log/secure i get:
SecurityAgent[104]:Showing Login Window
SecurityAgent[104]:User Authenticated: continue login process
And nothing else after that.
I've done "fsck -fy" in single user also without any result. I really need some help here...
Any ideas please ?
Thank you very much.
Regards
David

I think I made a mistake and typed a command made for NetInfo. Now, could that disable Open Directory authentication ? If so, How can I restore the Open Directory authentication ?

Why i can not use the ink 650 in the 3515 hp eprint,some body out there to help me out please...

why i can not use the ink 650 in the 3515 hp eprint?somebody out there to help me please??

Hi @ronjhay ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
I am having a bit of trouble understanding exactly what it is that you are asking, I apologize. Are you trying to use the number 650 ink cartridge in the printer? And it isn't fitting and you are asking why it isn't?
Please clarify. Look forward to hearing back from you!
I worked for HP.

Why I can not open my program Photoshop 12 and premiere element 12 in my computer

I purchased my Photoshop element 12 and Adobe premiere 12 a couples days ago
I came back home so happy to install my program in my computer but Till now I don't know why I can not be able to open the program yet

Hi,
We have pushed a new release today. See if you are able to access your script now. If you are still having problems accessing your script, please tell us a convinient time so we can set up a remote session with you.
Regards,
Sunny

R3trans & dbmcli schema user SAP SID can not login

Hello Guru's,
we have a problem with our MaxDB 7.6.6.6.
We can not start SAP, because the default user password is wrong.
But we can login with database studion to the schema user SAP<SID>.
We can administrate the db with control & superdba.
Has someone a suggestion, why dmbcli or R3trans can not login?
kwtadm> dbmcli -u SAPKWT,SAP -d KWT
Error! Connection failed to node (local) for database KWT:
-24950,ERR_USRFAIL: User authorization failed
kwtadm> R3trans -x
This is R3trans version 6.14 (release 700 - 03.06.11 - 17:57:00).
2EETW169 no connect possible: "DBMS = ADABAS D                         --- DBNAME = ''"
R3trans finished (0012).
trans.log
4 ETW000 [     dev trc,00000] Try to connect (DEFAULT) on connection 0 ...                              96 0.018268
4 ETW000 [     dev trc,00000] Wed Feb 8 17:06:23 2012                                             1089715 1.107983
4 ETW000 [    dbsdbsql,00000] *** ERROR => Connect to database failed, rc = -4008 (POS(1) Unknown user name/password combination)
4 ETW000                                                                                75 1.108058
4 ETW000 [     dev trc,00000]   -> SetSapdbCA(errcode=-4008)                                             27 1.108085
4 ETW000 [     dev trc,00000]   -> freeConnection(con_hdl=0)                                             41 1.108126
4 ETW000 [     dev trc,00000]   -> sdb_free(p=110f47270, size=608 (1017304 bytes allocated))            577 1.108703
4 ETW000 [     dev trc,00000]   -> sdb_free(p=110f46730, size=1016 (1016272 bytes allocated))            59 1.108762
4 ETW000 [     dev trc,00000] } DbSlSdbConnect(rc=99)                                                   15 1.108777
4 ETW000 [    dblink ,00433] ***LOG BY2=>sql error -4008 performing CON [dblink#8 @ 433]              66 1.108843
4 ETW000 [    dblink ,00433] ***LOG BY0=>POS(1) Unknown user name/password combination [dblink#8 @ 433]
regards
chris

solved
xuser list entry for DEFAULT was wrong.

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

Why isqlplus can not login today?

Similar Messages

Maybe you are looking for