Why it does not recognizes a full haskdisk's capacity ?

I'm first time to use linksys media Hub model NMH300, I use one 3TB WESTERN Harddisk (WD30EZRX-22DC0B0), and plus it in to slot A, after installation the media hub, I go in to configuration function, and open the Disk TAB to view status of harddisk, but the value of the "Total" only 746.1 GB, Who can tell me why I used a 3TB harddisk, but the system shows total only 746.1 GB ? what is the maximum capacity harddisk the media hub can suport for one slot? Thank you.

Theoretically, if a 3TB HDD drive will be detected by the mediahub then you have like 2.9X TB of available space not unless there are files saved on that HDD. What you can do is to click on “revert to single mode “in that way you will be able to format the HDD. Make sure that the HDD is part of the NMH Series Hardware Tested List because if not then the HDD may or may not properly work.

Similar Messages

Why Apple does not recognize the serial number of my iMac?

why Apple does not recognize the serial number of my iMac?

You're positive you have the correct number?
Open System Profile /Applications/Utilities
Select Hardware on the left under Contents
Serial number is on the right under Hardware Overview
You can copy and paste it from there to here > Apple - Support - Check Your Service and Support Coverage

Question: why mail does not recognize an address book group

i could not find an address book forum - excuse me if i post here.
an address book group with about 20 names has worked well for a year.
today i added and deleted a few names. now mail does not recognize the name as an email group.
i created a new group with a new name and imported all the names in one block from the non working group. the new group also is not recognized as having email addesses in mail.
my other groups seem to work fine.
i had entourage for awhile and had to rebuild it periodically. do i need to do something similar here.
thanks

Check the names of your groups that you have this issue with to make sure you don't have any special characters or extra spaces at the beginning or end of the group name.
I just found another posting on the message boards that solved my issues. Someone discovered that they had a blank space in their group name which was causing the error. I didn't have any extra spaces at th end of the group name, but I did have a period in my group name (St. Francis). I removed the period from the group name in address book and now the emails send to that group without the error message.

Why ipad does not sleep/keep full charge?

Why after My ipad has a full charge and later when I go check it appear my ipad does not sleep as I have hardly any charge left on my ipad?

What have you got open in the background e.g. email fetching, wifi and/or 3G on, location services etc ? There are tips on this page for maximising the battery life between charges : http://www.apple.com/batteries/ipad.html

Why iTunes does not recognize my credit acc.

I want to use iTunes to purchase applications for my iPad, but the system don't recognize my account as a valid one. I don't understand why because my credit card is a valid one used every day in Puerto Rico and US.
Do any other person is having the same situations? How to solve this?
Thank you.

The same with me: I live in Italy.
My credit card is right: I use it every day, but iTunes Store is having an issue from friday!
I contacted the support: they told me the issue is about the crad, not iTunes Store...

Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9. Why?

I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files. For instance, when trying to open a PDF file with the name
filename10.5.11.pdf in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

The version is Adobe Reader 10.1.0    I will request the latest version
and let you know if that fixes the problem
Actually I had changed the name of the file so our associates could access
the file (changed the . to a hyphen) It still made me wonder why Reader
wouldn't open it at that time.
Thanks again for you assistance and I will let you know if this resolves
the issue.
Regards,
Susan
From:   Ankit_Jain <[email protected]>
To:     SusanPleso <[email protected]>
Date:   10/19/2011 12:56 AM
Subject:        Adobe Reader does not recognize file name
(filename10.5.11.pdf) but does in Adobe Standard 9. Why?
Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
does in Adobe Standard 9. Why?
created by Ankit_Jain in Adobe Reader - View the full discussion
Hi Susan,
Thanks for providing the information.
Could you also let me know what is the exact version of Adobe Reader on
your system. You can check the same y clicking on Help > About Adobe
Reader X.
In case its not 10.1.1, please try updating to the latest version and see
if the problem persists.
Also, does any other PDF with a different filename open in Internet
Explorer correctly?
Thanks
Ankit
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3979020#3979020]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

Why windows 8 does not recognize ipod touch model A1367 4th Generation?

Why window 8 does not recognize ipod touch model A1367 4th generation? and of course iTunes either.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(it applies to win 8)
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

Hello, do you have another admin account to log into for a test?

Macbook Pro does NOT recognize Mic or Xlr-Usb Amp! WHY?

I recently bought an icicle (xlr to usb amp) for my blue spark condenser mic. it clearly states that it is compatible with OSX but it seems my macbook pro contradicts. the mac doesnt recognize the device at all, while in a PC the device is recognized but it reads 'unknown device'. NEED SOLUTIONS.

blueoval50 wrote:
I apologize.....Yes it was iPhoto that opened it. As soon as you said "Finder" I grew a brain and opened the device with Finder. Still kinda new to Mac's. Do you know why it does not show up on my desktop like my desktop did?
Go to Finder>Preferences>General and make sure that all four items are checked. It's considered an external disk. It should show up then.

Why Sometimes apple does not recognize Iran's IP??

Why Sometimes apple does not recognize Iran's IP. I can't connect to app store in Iran, but when I use vpn, it connects easily. I always face this message that "manage your internet connection and make sure its active".

There is no Apple presence in Iran for iPhones

TS3899 Why do I keep getting emails downloaded over and over again. It seems that iCloud does not recognize when the emails have already been downloaded to my iPad.

Why do I keep getting mails from iCloud over and over again? It seems that iCloud does not recognize that the emails were previously downloaded.

Does the iPhone NOT tell iTunes if you've played a track or not?
Yes, but the entire track must be listened to - until the track ends.
A song is not marked as played until the song has completed and the iPod starts playing the next song. The song must be played until the very end, and the same with a podcast.

My MAC OSX 10.4.11 does not recognize Agfa SnapScan 1212u.I am trying to find a working scanner at home to finish a project and dusted this off. Why doesn't it work?

My hp all-in-one is out of commission.I am trying to finish a scanning project and am forced to use an old Agfa SnapScan 1212u. My OSX Tiger 10.4.11 does not recognize. Do I need to download a driver? Thank you.

Hi, do you have the SnapScan siftware?
ScanWise X.app
If not try an older version of VueScan 2/3rds down this page...
http://www.hamrick.com/

Why my macbook pro 7.1 does not recognize 2x4 GB of ram (PNY), I already tried 1 by 1 and recognize up to 6? What it's wrong

Hello, I updated my RAM from 4 to 8, the problem is that does not recognize the 8 GB, I tried one by one, and only recognize 6 GB (one module of 2 and one module of 4) but by the time I install both, it doesn`t work. (I updated the firmware also)

If you substute each 4GB card, do you still have the system recognizing 6GB? Since it's not recognizing all 8GB, that suggests an issue with that memory ... is that what PNY says should be used in a MBP? While I haven't used PNY memory, they do have a line that they say is for Apple computers here. Is that what you used? I normally use Crucial or OWC (their own branded memory or Samsung) which have worked well over a number of systems.

ITunes does not recognize 5th Generation video iPod in WinXp

PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
Action: Reset iPod (iPod works fine when not connected to any computer).
Result: same as above
Action: Recharged iPod overnight with wall outlet to confirm full charge.
Result: same as above
Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
Result: same as above
Action: Reinstalled latest version of iTunes.
Result: same as above
Action: Reinstalled COM interface for IPod Service several times.
Result: same as above
Action: Ran repair maintenance on iTunes (repair successful).
Result: same as above
Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
Result: same as above
Action: Restarted and reinstalled iTunes and iPod Updater
Result: same as above
Action: Diasabled all non critical items in start menu
Result: same as above
Action: Uninstalled all three USB controllers
Result: same as above
Action: Reinstalled USBs
Result: same as above
Action: Tried to connect by firewire
Result: Error this device cannot be connected by IEEEE use USB cable.
Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
QUESTIONS:
Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
Thanks.
HP Pavilion dv notebook Windows XP

Solution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
I hope that this helps someone else with similar video iPod problems.

Why it does not recognizes a full haskdisk's capacity ?

Similar Messages

Maybe you are looking for