Why it is not possible to open raw files

I have tranferred som NEF RAW files to an external harddisk, and now I can't open them i Elements9. Anyone know why?

Hi,
Which operating system are you running on?
Which camera (make & model) produced the raw files?
Did you import the raw files and see them in elements before you transferred them?
What error message do you see when you try to open the files you have transferred?
The most likely reason is that you transferred the files outside of elements and therefore broke the links. You should see a message about missing files in this case.
Brian

Similar Messages

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11?

Is there a possibility to open raw files from the Nikon D750 in photoshop elements 11? I allready tried to install camera raw 8.7.1 but it doesn't work.

Yes, I see:
Letzte Aktualisierung
16.04.2012
The link I gave is listed in the faqs of this forum.
Photoshop Elements FAQ List
mfG
Michel

HT1338 why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

why i'm not able to open pdf files? says i need adobe reader, but not sure where to get it.

Welcome to the Apple Support Communities
You can use Preview to open PDFs. Right-click a PDF file and go to Open with > Preview

Not able to open raw files from my CAnon 5D mark III in PS CS6!

I have camera raw 8.6 installed and am running photoshop cs 6.0. All of a suddened photoshop will not open raw pictures that were shot on a CAnon 5D mark III. Any ideas on what could be the problem. The pictures do open in light room.
Thanks
Bruce

What exactly happens when you try to open raw files from Canon 5D Mark III in PS CS6. Do you get any error message? An error screenshot would help.
Make sure your PS CS6 is up-to-date from Help > Updates.
Restart the machine and retry.
~ Arpit

Actions Possible Without Opening Raw File in Photoshop?

Is it possible to record certain actions on a raw file without opening the file in Photoshop?
Let's assume I have 250 files, all needing lens correction (and maybe other common tweaks) as a basic first step. I'd like to be able to record an action that (1) opens my NEF file in ACR; (2) makes the lens correction based on the profile for the particular lens I used; (3) [other tweak--say noise reduction]; (4) [other tweak--say color temperature]; and then (5) closes the file generating nothing but the .xmp file.
Then when I go to work on each file, all my basic corrections have been made so that when I reopen later in ACR, I only have to make custom changes before finally opening in Photoshop.
I've tried a few things, scanned the forums, checked the online help center, gone through a few Adobe TV tutorials, but I can't figure out how to do it.
Any help?
I'm in CS6.
I just realized that this question probably belongs here rather than the ACR discussion. I apologize for cross posting.

Phoenix89MR wrote:
Is it possible to record certain actions on a raw file without opening the file in Photoshop?
No...an Action is something that records something in Photoshop. Yes, an Action can record ACR settings....but you need to actually end up opening the image in Photoshop and it will render the file.
What you really want to do is to look into Camera Raw Presets and using them while in Bridge. You would open a representative image, adjust the image, save a preset and then apply that preset to as many images as you want to in Bridge. Also note you can open multiple images in ACR, select them and adjust multple images at once. You can also adjust an image and then in Bridge, copy the settings from the one file and paste them to others.
Lots of way to accomplish what you want but not really by Actions in Photoshop.

Not possible to open PDF file generated by Report functionality

Hello,
we are facing the problem that reports in PDF format deliverd in SharePoint by Duet Enterprise cannot be opened by Adobe Reader. The error we get is the following:
Adobe Reader could not open "filename.pdf" because it is either not a supported file or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
When trying to open it with Internet Explorer the following error message pops up:
File does not begin with '%PDF-'.
Does anyone know how to fix this problem?
Thanks in advance.
Kind regards
Sven

Hi Hi Sven,
Could you please tell me the type of report you were trying execute? Is it ERP or BW? And ALV or non-ALV?
We are supporting PDF report output type only for BW reports and for ERP non-AVL reports. For other types PDF format is not supported.
If you configure PDF for other report types then you will get report output in PDF file in SharePoint server, but you will face above error message while opening the file.
Regards,
Binson

Why can Lightrooms not view my NEF(RAW) File taken from my Nikon D5500?

I have a Nikon D5500 and viewing a JPEG is fine. If I change my file format to NEF(RAW) when importing files lightroom cannot view them. It gives me a box to check for updates but I have to most recent version. Ver:5.7.1.
A few weeks ago I used my friends Nikon D5300 and the RAW files were perfectly fine.

It's a new camera model that was released in that "hole" between Lightroom releases. But you can download the DNG converter version 8.8 and convert that NEF files to DNG. I know, it's a Band-Aid fix. But it will work in the meantime while we wait for the next Lightroom update or upgrade.

I have used Lr many years without problems. Now it is inpossible to edit . Can not see the editing in main window only in the small thumbnail. Suddenly it is not possible to import raw-files from my Linux camera ( it worked earlier)

Editing mode does not work. I can not follow de editing in the main window. I cah see it in the thumbnail.

From your description of the problem, I suspect that you have a standalone license but have downloaded and installed the CC update. Or, it's the other way around. In either case, you need to install the right version.

Unable to open RAW files after reinstalling Photoshop CS4

I recently did a system recovery to my computer due to downgrading to Windows 7; however, after I installed Design Premium back to my PC, I am not able to open RAW files in Photoshop. It prompted "Could not complete your request because it is not the right kind of document." I tried to check for Photoshop updates but no updates are available. I tried re-installing Design Premium but the issue still persists.
My system configuration is as follows:
Windows 7 Professional x64 (Yet to install Service Pack 1, but I don't think that really matters)
Adobe Creative Suite 4 Design Premium (Photoshop Version 11.0)
Canon EOS 50D (Firmware Version 1.08)
Anyone may have a clue on how to fix that? Thanks a lot!
Screenshot as follows:

When you reinstalled CS4, you went back to the original release.
Now you must apply all the updates to Photoshop and to Adobe Camera Raw manually.
You cannot rely on the Adobe auto updater to tell you that you are up to date. That updater was broken for years and years, and that was and is certainly the case with CS4.
Adobe didn't get their updater act together until CS6.
You also have to update the ACR plug-in manually.

Cannot open Raw files on Lightroom 3.6

Hi I have Lightroom 3.6, and it will not let me open Raw files. I have a canon 600D .
How can I get my Lightroom to open Raw Files ?
Thanks kindly for any replies.

You can d/load the free DNG Converter and convert the CR2 files to DNG and they will import to Lr3.6 or you can upgrade at a small cost to the latest Lightroom which will also import the CR2 files.

Any ideas why Photoshop CC 2014 is now not opening RAW files from Canon 70D?

I used to be able to open RAW files from my Canon 70D camera, and since I did an update, it will no longer open RAW files from my Canon 70D camera.
I've uninstalled, and re-installed Photoshop CC 2014, and still no luck.
Any help would be appreciated!

I should check to see if I have the latest version.
You don’t, because 8.0.x is not the latest.
You need to update ACR.
Camera Raw plug-in installer

Why it is not possible to install apps on an SD card on a Win 8.1 tablet?

Why it is not possible to install apps on an SD card on a Win 8.1 tablet? If it is possible to install apps on SD card in Windows phone 8.1, why is it not possible on Windows 8.1? What sort of design philosophy you follow that gives better features on
a mobile version of the OS but not on the parent OS? Kindly explain if you can!

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

NTLM Authentication : why is it not possible to create more than one NTLM realm ?

Hello,
I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
Can you explain exactly what is the blocking point ?
Thanks in advance
Regards

Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship. From that point it is all based on how NT/Active Directory domains work. As long as there is a trust between the domains, you can can auth users from as many domains as you like.
There is an agent in the works. The ADAgent will be released with 7.5. The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA. At this point, current versions still require trust relationships between all of the domains touched.
Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
Before you configure even a single domain controller machine using the
adacfg dc create
command, ensure that the AD Agent machine is first joined to a domain (for example, domain
J
) that has a trust relationship with each and every domain (for example, domain
D[i]
) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
Depending on your Active Directory domain structure, the following scenarios are possible:
1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
a. A two-way external trust relationship can be established between the two domains, D[i] and J
b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

GoPro HD - Why is it not possible to use a GoPro as an external/remote camera on my iPhone?

If I could cable a GoPro Hero HD camera to my iPhone, why would I be unable to tell my iPhone 4 to use it as an external video camera and video source? Or any USB camera for that matter?
Why is this not possible?
Ian

There is no USB camera driver in iOS.
For security reasons, none can be added by third parties.
If they wanted you to use it, the manufacturer would write an app for that.

Why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

why is it not possible to install apple remote desktop (from appstore bought earlier) on my new imac 21?

hello Dahveed, thanks for your reply, i solved it with the help of the migration assistant from another mac - now it works (but before as more info: for my new imac it was not possible to install apple remote desktop from appstore (the install-button not available, the same as installed already...) - and i don't know why...? - is it possible that the reason is the number of owned macs?)

Why it is not possible to open raw files

Similar Messages

Maybe you are looking for