Why it take so long to start the SAP Web Application Server?
As I read from the doc that starting the SAP Web Application Server will take from 25 to 40 minutes, I don't believe. But as I try it on my machine, it does take really so long. Isn't it a wonder?
I am used to work with Tomcat, JBoss, BEA etc. None of them will take so long.
Hi Chen,
In a WAS I assume that it has dual stack (ABAP + JAVA)
For the startup of a ABAP Stack it generally takes about 2 minutes or so.
And for the WAS JAVA STACK should take around 8 to 15 minutes depending on the application, services and hardware sizing.
The reason for the long time required for a WAS Java Stackis:
JAVA Stack depends on three diffrent components: a) dispatcher(java) b)SDM c) Server0 process.
Now before the execution of all these the first thing what happens is the initializastion of jcontrol which inturn initiates the java bootstrap process.
At this moment of time the JVM environment takes some time for the loading and memory management. Once the JVM is loaded successfully then only the three compnents (SDM, dispatcher and server0) are initiated to run.
The SDM and dispatcher do started up with a couple of services and hence require not toomuch of time.
But the main component i.e Server0 process consumes a lot of time to startup at it requires many of the Java stack services to start before it reaches running state.
Again the port configuration for HTTP for SDM , dispatcher , server0 and java process also takes place.
So this was an overview for the Time required for a WAS Stack to come up in operational condition.
Apart from this , seeing specifically to your scenario, wherein it takes 25 - 40 minutes could be an issue with the Hardaware sizing of the Server and the Sofware compnents / tools loaded. We might need to analyze it in more detail to get a clear picture.
I hope this helps you!
Regards,
Prem
Similar Messages
-
Could not start the Crystal Report Application Server service on local computer
Post Author: [email protected]
CA Forum: Deployment
Hi
I have a following problem.
I have installed Crystal report application server(RAS)(CE embeded 10) on Windows server 2003 enterprise x64 edition.
When i start it, i see an error:
Could not start the Crystal Report Application Server service on local computerError 1067: the process terminated unexpectedly
Sometimes, i can start it but it stops a few minutes later.
I have disabled DEP (data execution prevention).
Log:
Faulting application crystalras.exe, version 10.0.0.533, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
Please help
Thanks for your helpThis error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram -
Error to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version
Hi,
Can anybody help me?
I'm try to install the SAP NetWeaver Application Server ABAP 7.02 SP6 32-bit Trial Version... and in the Running phase 11: Create sequence for the ABAP user, I had this error:
What do have I to do solve this problem?
ERROR 2014-07-13 14:24:19.395 [iaxxinscbk.cpp:244]
CJS-00030 Assertion failed: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR 2014-07-13 14:24:19.395
CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].
ERROR 2014-07-13 14:24:19.495 [sixxcstepexecute.cpp:988]
FCO-00011 The step SdbCheckExistingSequence with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_ADA_DB|ind|ind|ind|ind|6|0|Sdb_Schema_Sequence|ind|ind|ind|ind|6|0|SdbCheckExistingSequence was executed with status ERROR ( Last error reported by the step :Assertion failed: : [3336] 14:23:42 ***Warning: Loadavg: Could not add processor time performance counter to query.
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://virtuawjms/NSP [Restart required].).
INFO 2014-07-13 14:24:22.669 [synxcpath.cpp:815]
CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Arquivos de programas\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL\__instana_tmp.xml.
WARNING 2014-07-13 14:24:24.752 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2014-07-13 14:24:24.752 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .Hi,
Kindly follow SCN thread Sapinst error: No GUI server connected and try to restart the complete system.
Regards,
Gaurav -
Netweaver administration and SAP Web Application Server r the same?
Hi All,
I am a Basis Consultant & new to Netweaver,..
I am interested in Netweaver administration..
1.I am confused wheather netweaver administration and SAP Web Application Server r the same?(or WAS is just another component of Netweaver).
2.Do we need to administrate all the components of Netweaver(EP,BI,etc.,)seperately as an Netweaver Administrator?
Thanks in Advance ,
MaltiHi Malti,
You must first download and read this document and then read 'help.sap.com' for what is netweaver.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa">Introduction to Web Application Server</a>
The above mentioned document is a crisp guide to what is WAS.
Further I got this from the sdn/netweaver webpage
SAP NetWeaver is a web-based, open integration and application platform that serves as the foundation for enterprise service-oriented architecture (enterprise SOA) and allows the integration and alignment of people, information, and business processes across business and technology boundaries. It utilizes open standards to enable integration with information and applications from almost any source or technology. SAP NetWeaver is the foundation of SAP xApps and mySAP Business Suite solutions, and also powers partner solutions and customer custom-built applications.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/netweaver">SAP Netweaver SDN Page</a>
You have lots of reading to do now.. hope that helps
Regards,
Siddhesh -
Download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit
I can not download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit complete, the file size is 3,912 gb and I can only download 2 gb.
How can I download the full file?
thank youhttps://store.sap.com/sap/cpa/download/20/0000000218?tkt=6728195BC9A41D6FDC99371FC9BB49E9_20140521182535.4356890&sap-lan…
-
Error in starting the domain in application server 8.2
I want to deploy a application EAR on newly created domain. For this :
1. Got the 8.2 Java application server installed on solaris box.
2. Created domain using the asadmin command -> create-domain --adminport 4848 --adminuser admin <DOMAIN_NAME>
On starting the domain with this command - sh asadmin start-domain --user admin <DOMAIN_NAME. I am facing the below issue. Please note this is a fresh installation of the app server and a new domain
To troubleshoot this, I have already followed below steps , without any resolution:
1. Checked port with - netstat -an|grep 45184 and also checked the processes using ps -fu <unix_user>. Even after killing the process, same error.
2. Gave full permissions on /AppServer8.2/imq/var/instances
3. Logged in as root user and then tried to start domain
4. Updated domain.xml with some other port , checked this port if it is free , then replaced in domain.xml
5. No logs generated in /AppServer8.2/imq/var/instances
Please help me in resolving this issue. I have downloaded the 9.1 application server and will install and check in the meantime
[#|2013-07-29T14:14:34.067+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
/usr/j2se/bin/java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/logs/server.log
-Djava.endorsed.dirs=/PostCUG_Track1/AppServer8.2/lib/endorsed
-Djava.security.policy=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/server.policy
-Djava.security.auth.login.config=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/keystore.jks
-Djavax.net.ssl.trustStore=/PostCUG_Track1/AppServer8.2/domains/MPCBebk/config/cacerts.jks
-Djava.ext.dirs=/usr/j2se/jre/lib/ext:/PostCUG_Track1/AppServer8.2/domains/MPCBebk/lib/ext:/PostCUG_Track1/AppServer8.2/derby/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
-Dcom.sun.aas.configName=server-config
-Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
-Ddomain.name=MPCBebk
-Djmx.invoke.getters=true
-Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
-Dcom.sun.aas.promptForIdentity=true
-Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
-Dcom.sun.aas.instanceRoot=/PostCUG_Track1/AppServer8.2/domains/MPCBebk
-Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
-Dcom.sun.aas.domainName=MPCBebk
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dproduct.name=Sun-Java-System/Application-Server
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
-Dcom.sun.aas.configRoot=/PostCUG_Track1/AppServer8.2/config
-Djava.library.path=/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/PostCUG_Track1/AppServer8.2/lib:/usr/lib/lwp:/PostCUG_Track1/AppServer8.2/lib:/usr/lib/lwp:/usr/j2se/jre/lib/sparc/client:/usr/j2se/jre/lib/sparc:/usr/j2se/jre/../lib/sparc:/PostCUG_Track1/AppServer8.2/lib:/PostCUG_Track1/AppServer8.2/lib:/PostCUG_Track1/AppServer8.2/lib:/opt/CA/SharedComponents/lib:/usr/lib
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-cp
/PostCUG_Track1/AppServer8.2/lib/appserv-rt.jar:/usr/j2se/lib/tools.jar:/PostCUG_Track1/AppServer8.2/lib/j2ee.jar:/PostCUG_Track1/AppServer8.2/lib/activation.jar:/PostCUG_Track1/AppServer8.2/lib/mail.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-cmp.jar:/PostCUG_Track1/AppServer8.2/lib/admin-cli.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-admin.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-jstl.jar:/PostCUG_Track1/AppServer8.2/lib/commons-launcher.jar:/PostCUG_Track1/AppServer8.2/lib/commons-logging.jar:/PostCUG_Track1/AppServer8.2/lib/j2ee-svc.jar:/PostCUG_Track1/AppServer8.2/lib/jaxr-api.jar:/PostCUG_Track1/AppServer8.2/lib/jaxr-impl.jar:/PostCUG_Track1/AppServer8.2/lib/jaxrpc-api.jar:/PostCUG_Track1/AppServer8.2/lib/jaxrpc-impl.jar:/PostCUG_Track1/AppServer8.2/lib/dom.jar:/PostCUG_Track1/AppServer8.2/lib/relaxngDatatype.jar:/PostCUG_Track1/AppServer8.2/lib/jax-qname.jar:/PostCUG_Track1/AppServer8.2/lib/saaj-api.jar:/PostCUG_Track1/AppServer8.2/lib/saaj-impl.jar:/PostCUG_Track1/AppServer8.2/lib/xsdlib.jar:/PostCUG_Track1/AppServer8.2/lib/jmxremote.jar:/PostCUG_Track1/AppServer8.2/lib/jmxremote_optional.jar:/PostCUG_Track1/AppServer8.2/lib/jsf-api.jar:/PostCUG_Track1/AppServer8.2/lib/jsf-impl.jar:/PostCUG_Track1/AppServer8.2/lib/rmissl.jar:/PostCUG_Track1/AppServer8.2/lib/xalan.jar:/PostCUG_Track1/AppServer8.2/lib/xercesImpl.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-upgrade.jar:/PostCUG_Track1/AppServer8.2/lib/appserv-ext.jar:/PostCUG_Track1/AppServer8.2/lib/install/applications/jmsra/imqjmsra.jar:/PostCUG_Track1/AppServer8.2/imq/lib/jaxm-api.jar:/PostCUG_Track1/AppServer8.2/imq/lib/fscontext.jar:/PostCUG_Track1/AppServer8.2/lib/ant/lib/ant.jar
com.sun.enterprise.server.PEMain
start
display|#]
[#|2013-07-29T14:15:35.774+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
[#|2013-07-29T14:15:35.776+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory /PostCUG_Track1/AppServer8.2/imq/var/instances|#]
[#|2013-07-29T14:15:35.776+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
[#|2013-07-29T14:15:35.777+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|UnknownException during startup. Disable quick startup by setting system property com.sun.enterprise.server.ss.ASQuickStartup to false
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:427)
at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:54)
at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: com.sun.messaging.jms.JMSException: [C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:191)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:116)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:54)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:61)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:291)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:113)
at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:98)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:613)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1194)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1949)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:745)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:315)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:783)
at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:335)
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:396)
... 3 more
Caused by: java.io.IOException
at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:118)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:81)
at com.sun.enterprise.server.ss.ASInputStream.read(ASInputStream.java:73)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:183)
at java.io.BufferedInputStream.read(BufferedInputStream.java:201)
at com.sun.messaging.jmq.io.PortMapperTable.readLine(PortMapperTable.java:277)
at com.sun.messaging.jmq.io.PortMapperTable.read(PortMapperTable.java:233)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:185)
... 21 more
Caused by: java.io.IOException: Invalid argument
at sun.nio.ch.DevPollArrayWrapper.poll0(Native Method)
at sun.nio.ch.DevPollArrayWrapper.poll(DevPollArrayWrapper.java:136)
at sun.nio.ch.DevPollSelectorImpl.doSelect(DevPollSelectorImpl.java:70)
at sun.nio.ch.SelectorImpl.lockAndDoSelect(SelectorImpl.java:59)
at sun.nio.ch.SelectorImpl.select(SelectorImpl.java:70)
at com.sun.enterprise.server.ss.ASSelector.select(ASSelector.java:92)
at com.sun.enterprise.server.ss.ASInputStream.waitForSelect(ASInputStream.java:101)
... 28 more
|#]
[#|2013-07-29T14:15:35.798+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Exception while stoppping Lifecycle.
com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: Error occurred on connection creation [127.0.0.1:45184]. - cause: java.io.IOException
at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:376)
at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:445)
at com.sun.enterprise.server.ss.ASLazyKernel.stopLifecycle(ASLazyKernel.java:178)
at com.sun.enterprise.server.ss.ASLazyKernel.stopMQ(ASLazyKernel.java:172)
at com.sun.enterprise.server.ss.ASLazyKernel.exitServer(ASLazyKernel.java:74)
at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:67)
at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
|#]Hi,
Try to manually download the file from application server using standard transactions, and than check how many records are you able to download from app. server.
I guess there might be something wrong with the format of 583rd record, which makes sap assume that the file has come to an end.
Hope this will help you.
Regards,
Vinit... -
Hi,
Is it possible to run Office Web Application Server (shows preview images for docs and allows Notepad, Word, Excel to work etc) on one of the SharePoint 2013 App Servers. I don't want to have to create a new server. It talks about setting
up a farm.
Better still how the feck do you switch this functionlity off - I always remember it being a pain in the arse. We accidentally ran the first part of the configuration on one of the SharePoint App Servers only to find out our subscription does not
have this download (bar stewards changed this Nov 2014 - just after started contract).
Help would be much appreciated as close to go live
Thanks.
John.Hi John,
Please reboot the server at the very beginning and test the issue again.
Quote from you:
Problem is I get Internet Web Page cannot display the webpage everytime I click in a excel document, powerpoint document, notebook link or the preview
Please post the url in browser address here.
If you just executed the command below:
Add-WindowsFeature Web-Server,Web-Mgmt-Tools,Web-Mgmt-Console,Web-WebServer,Web-Common-Http,Web-Default-Doc,Web-Static-Content,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Security,Web-Filtering,Web-Windows-Auth,Web-App-Dev,Web-Net-Ext45,Web-Asp-Net45,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Includes,InkandHandwritingServices
It just install some windows feature to the current server, we can find it should be done before installing several server products.
Could you please verify if the command you executed is the same as the one above?
You could also go to local disk and check if there is OfficeWebApps folder under C:\ProgramData\Microsoft\?
If you check in Control Panel > Programs, is there any feature related to Office Web Apps?
If you have confirmed there is no Office Web Apps feature installed, please go to SharePoint document library settings, and make the document to open in client, does it work?
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error on the installation of Web Application Server Java 6.40 SP9 on my PC
Hi, All,
I got the following error when I try to install Web Application Server Java 6.40 SP9 on my laptop using the CD that comes with the Book 'Java Programming with the SAP Web Application Server'. I'm currently using window XP.
The installation failed on the 3rd step 'SAP System Installation'.
I logged on my laptop as my own userid, but I should have the administrator's rights.
ERROR 2007-05-15 15:43:10
FSL-00001 System call failed. Error 2 (The system cannot find the file specified.
) in execution of system call 'LoadUserProfile' with parameter (thread token for IT-899\j2eadm, j2eadm), line (616) in file (synxccuren.cpp).
Do you have any ideas what it means? Any inputs would be greatly appreciated.
JoannaThank you all for your replies. I downloaded the newest version of Netweaver from the SAP website and got it installed successuflly. Points rewarded...Thanks.
Joanna -
Logs during starting of SAP Web AS
Hi,
Could any one help me in locating the folder structure where the logs would be when SAP Web AS is started ?
Thanks !
KarthikHai,
For ABAP you can see the startup logs under /home/<sid>adm.
You will find the startsap.log there.
Check /usr/sap/SID/Instance dir/work for all the workprocess trace files.
If you get any problem in starting the Instance you have to look in the above paths to get the information on the error.
For JAVA you can see the logs under
/usr/sap/SID/DVEBMGS00/j2ee/cluster/server0/log for defaultTrace.trc files which is same as dev_w* files in ABAP.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/46/952c00554915eee10000000a114a6b/content.htm
You can try ADM200 for further details.
http://www.sapdb.info/adm200-sap-web-application-server-java-administration/
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 16, 2009 11:49 AM
Edited by: Yoganand Vedagiri on Feb 16, 2009 11:53 AM -
Why does it takes so long to download the new version of Itunes?
why does it takes so long to download the new version of Itunes?
Since you cannot download iTunes on an iPod touch, this would not seem to be the correct forum for this question. I'd suggest you post full details of your problem in either the iTunes for Mac forum or the iTunes for Windows forum, as applicable to your system.
Regards. -
Hi,
After installing Visual Studio Community 2013, my Excel/Word/PowerPoint 2010 student edition takes much longer to start-up. Whenever I open Excel/Work/PowerPoint, the Windows Installer configures VS Studio 2013 each time. Is this the normal behavior, can
I stop this?Thank you for your response.
I actually found the answer I was looking for through a couple of URL's below:
1. This first URL walked me through everything I needed to do find the actual warning using the Event Viewer and then the fix. There are two command for the suggested fix (remove and addlocal registry items) but since I don't think MS Office 2010 student
edition came with VBA support (I could be wrong), I only did the REMOVE command. After that, launching my Office apps now only takes a couple of seconds instead of 2-3 minutes. Here's the first URL (http):
Since I'm not allowed to post a link yet:
The blog is from MSDN by Heath Stewart (MSFT) dated May 29, 2009 "how-to-workaround-the-issue-when-opening-office-applications-repairs-visual-studio"
2. The second URL (https) below is from a forum with similar issue that confirmed what I had to do. In this forum the helpee ran the suggested two commands and had the same warning:
Since I'm not allowed to post a link yet:
This next URL is from Anne Jing's thread dated Jan 6-9, 2015:
So, I decided to do as helpee did.
Here are the details of my challenge and the fix I ran following the first URL above:
Following is the actual warning I was getting when launching Office apps:
Log Name: Application
Source: MsiInstaller
Date: 1/23/15 12:12:30 PM
Event ID: 1001
Task Category: None
Level: Warning
Keywords: Classic
User: Gerry-pavg6-HP\Gerry-pavg6
Computer: Gerry-pavg6-HP
Description:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'VB_for_VS_7_Pro_11320_x86_enu' failed during request for component '{9DE325B8-0C09-49EB-99AE-12284811D61C}'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MsiInstaller" />
<EventID Qualifiers="0">1001</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-23T17:12:30.000000000Z" />
<EventRecordID>51710</EventRecordID>
<Channel>Application</Channel>
<Computer>Gerry-pavg6-HP</Computer>
<Security UserID="S-1-5-21-3985824742-3742285712-2182756392-1002" />
</System>
<EventData>
<Data>{9C593464-7F2F-37B3-89F8-7E894E3B09EA}</Data>
<Data>VB_for_VS_7_Pro_11320_x86_enu</Data>
<Data>{9DE325B8-0C09-49EB-99AE-12284811D61C}</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>(NULL)</Data>
<Data>
</Data>
</EventData>
</Event>
Fix:
I only run the 'REMOVE' command below for now because I didn't want to reinstall VS 2013 from the Internet, it needs >7GB to download) Jan23/15:
'REMOVE'
start /wait msiexec.exe /i {9C593464-7F2F-37B3-89F8-7E894E3B09EA} /L*vx "%TEMP%\1.remove.log" REMOVE=VB_for_VS_7_Pro_11320_x86_enu
'ADDLOCAL'
start /wait msiexec.exe /i {9C593464-7F2F-37B3-89F8-7E894E3B09EA} /L*vx "%TEMP%\2.addlocal.log" ADDLOCAL=VB_for_VS_7_Pro_11320_x86_enu TARGETDIR="%ProgramFiles%\Microsoft Visual Studio
10.0"
Note: Please ensure to open the first URL above and follow the steps when running the REMOVE and ADDLOCAL commands above. -
I don't know why it takes too long time to sample flat file.
I don't know why it takes too long time to sample flat file.
OWB Client 10.1
While importing a flat file of fixed width ,
in the screen "Flat File Sample Wizard" shows the text box number of rows with default value 200.
I want to extend this value to 700,000.
But, it takes too long time (over 5 hours) to sample it.
Do you know why it is happend? or How can i fix this problem?
Thanks in Advance.
Regards,
JWS.Hello,
Actually flat file sampling process goal is to capture the structure of the file. Thats why initially the sample size is set to 200 lines.
The question is why you are trying to perform sampling by 700000 rows? Are you expecting some change in structure beyond this mark?
If so, and you want to capture the fact that your source file is multi typed, your better prepare small file for sampling outside the OWB.
Sergey -
If I click stop, why can't I simply re-start the track?
I got to say I can't get on with the new version of iTunes. And I normally embrace change but this is not better in any way whatsoever.
Most frustrating is when I'm playing a track, If I click stop, why can't I simply re-start the track? It doesn't comu up with an option to pause the track...
Also, when I click on an track that sits on my desktop, why doesn't iTunes autoatically default to show the music folder and the actual track thats showing....
Grrrrrrrrrrr....
NeiliTunes does allow you to pause and restart a track as long as you don't change the source. If you do that you only get the stop option.
If I remember correctly iTunes has always done this, you are not the first person tp find this annoying.
If you would like to suggest improvements to iTunes, use the "Provide iTunes feedback" option on teh iTunes help menu. We are all just users here so it is unlikely that anyone from Apple will read your post. -
So I sent my macbook pro to a nearby macbook repair person because it was too slow, everytime I click on something, the rainbow wheel will appear and it will take like a few minutes to open up a window. Also, my videos were stucked whenever I played them in VLC etc but when I use my external hard disk to play the video, it will be okay. So I sent to this guy explaining all the problems I am facing with my macbook, then he claimed that he could do it within a day as its probably just the hard disk problem or if its the processor(2days). And now its been 3 weeks and he is still fixing my macbook, he told me it was the bios and he needs sometime to do it as he needs to be very careful. I dont know if I should believe him, its been more than 3 weeks now? I just wanted to know if what he is saying is logic and if it is, does it really take so long to fix the bios?
p/s I've increased the RAM to 8gb 1600Mhz Ddr3 recently thinking that was the problem but obviously it didnt fix my problem Help me out
Thank youuu.Mac's do not have a BIOS to flash. Get your Mac back before this situation gets worse. Then take it to an Apple Store. You will have to pay.
FYI
"p/s I've increased the RAM to 8gb 1600Mhz Ddr3 recently"
You fitted the wrong Ram, you will need to change it for the right Ram when you get it back. -
my folders take forever to open and then the docs within take a long time for the icon to pop up. the same thing with moving itmes from the desktop to a folder, and also emptying the trashh
Don't know if that would be a failing hard drive, but it may be that you are out of available space. How much hard drive space do you have available? Please highlight the Macintosh HD icon and then press Command and I for a get info window. Once open, please copy and post the following:
Capacity:
Used:
Available:
Mac OS requires a minimum of 10 - 15% of total hard drive space available and empty at all times in order to operate properly.
Maybe you are looking for
-
When Firefox is started, the circular think button continues to run, but the program has only started one new tab. When the Home Page button is clicked, program seems to lock in a 'Firefox not Responding' error message. When I try to shut it down by
-
I am in Australia and wish to purchase a movie in the USA itunes store and download it to my windows 7 PC. Can any one help?
-
Amount Limit on Credit entries on the basis of User ID
Hi, Could anybody please guide me about: How can we set the Amount Limit on Credit entries on the basis of User ID? Thanks and Regards
-
Hello, I would like to ask either it is neccessary to have a new division for new sales order type. Thanks for your time. Your fruitful answer will help me to move one step forward Sherry.
-
How do you remotely find a stolen laptop?
A week ago my car was broken into and all my computer equipment was stolen. I've already posted about this in the community and asking ways to access my remaining data from the iPhone on to the new laptop. It's probably to late and was told