Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

Can't really say, but I see this occurring on all of my Macs since the 10.8.2 update and keep reading about it at several other Mac user boards.
Bottom line: it's a general problem, but more of an inconvenience, than a serious problem. Probably will be solved with the next update.

Similar Messages

Take long time to shut down for macbook pro OS yosemite

after installed yosemite, my macbook pro (year 2013)take very long time (about 30sec) to shut off when i click shut down.. anyone have the same problem?

5 seconds is to fast. 20-30 seconds OK. 40 seconds have a cup of coffee.

MBP takes long time to shut down

Hi,
Recently my 13" Mid 2012 MacBook Pro has been taking around 30-40 seconds to shut down whereas it only took 3 seconds before. The system itself is as responsive as ever and the OS and hardware seem to be working well, but the hard drive seems to be taking a long time to stop. Please help. This is very worrying.

1. Startup in Safe Mode.   http://support.apple.com/kb/PH14204
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

My macbook air takes longer time to shut down even after having 32GB of free space in it.

Please give me solution fast.

And that's tested with your Mac? That's fast (I only get about 23Mbps with my ISP!).
You should have no trouble with slow page loading. You might want to change your DNS's through the Network panel in System Preferences. I would try the OpenDNS servers:
208.67.222.222
208.67.220.220
If that doesn't help, call back...
Clinton

Why does Mountain Lion take a long time to shut down my MacBook Air when I chose "Shut Down?" Much longer than before the upgrade.

Mountain Lion takes a long time to shut down. Much longer then Lion.
Any comments appreciated.
Alan

The honeymoon is over?

Mac OS X take a long time before shutting down...

Hi everyone,
I have a problem that I can't explain :
My mac book pro take a long time before shutting down. I don't know why.
When I click shut down, everything works normally.
OS X quit my applications, the dock, the finder...
But it's stay 10 minutes on my desktop background before the logout and finally the shutdown (what's the matter ? what does it do ?).
I don't know what to do to find the problem...
Maybe it's a process but I don't know how to localize it.
What are the minimal processes in OS X (I'll try to find the problem by elimination) ?
P.S. Sorry for my basic English... French native.
Thank a lot for your help !

Hello everyone !
It's me d.bertrand (I had a problem with my account...) So I create a news account (sorry moderators) !
I try to fix bugs with onyx but no results.
Here my log files (I shutdown OS X at 11:48 and he really shut down at 12:04... 16 minutes !)
With Onyx I look into the log file... And find that :
SYSTEM LOG
Jul 6 11:48:51 denis-bertrands-computer shutdown: reboot by Den:
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: "/Library/StartupItems/Tablet" failed security check: permissions
Jul 6 11:48:51 denis-bertrands-computer Parallels: Stopping DHCP/NAT daemon...
Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: authentication service (508) did not complete successfully
Jul 6 11:48:52 denis-bertrands-computer Parallels: Unloading Network module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading ConnectUSB module...
Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading Monitor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels VM observer thread stopped
Jul 6 11:48:54 denis-bertrands-computer Parallels: Unloading Hypervisor module...
Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels Workstation Hypervisor exited.
Jul 6 11:48:54 denis-bertrands-computer Parallels: Shutdown complete.
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: The following StartupItems failed to properly start:
Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: /System/Library/StartupItems/AuthServer
WINDOWSERVER LOG
Jul 06 12:04:09 [84] CGXRestartSessionWorkspace: session workspace exited for session 256 ( on console )
Jul 06 12:04:09 [84] loginwindow connection closed; closing server.
Any idea ?
Thanks !
MBP 15" 2.33 / 2GoRAM Mac OS X (10.4.10)

Why it takes long time to download and udates for iphone4

why it takes long time to download and updates for iphone4 ?

Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Why do you need this if you are going to Oracle. Try
removing this. It might be trying things out with the
old driver and then moving to the new driver. This has nothing to do with it. (And it doesn't "try things out")
>
Also check your machines. They might be slow. There is
no reason, it should take more than few hundred
milliseconds to connect to a database on localhost as
your case is.Possible reasons...
- Network traffic
- Faulty router/gateway
- Busy server
- Faulty network card (either end)
- Conflict with another box

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1?

Why it takes long time (about 10 Min) to map the network drivers in windows 8.1? I don’t have this problem with any other operating systems (Ex: Windows 7 or XP)

Can you perform a refresh ?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

HT4623 My iPhone 4S keeps shutting down after I upgraded to iOS7

My iPhone 4S keeps shutting down after I upgraded to iOS7

This has happend twice to me in the past 12 hours since I just updated to iOS 7.0.2, but did not happen after I updated to iOS 7
Last night the operating system crashed to the Apple symbol (a reset) when browsing the settings menu.
Perhaps it's a bug with the movement tracking? Seems to be connected with sudden movements (I noticed it shut off when I quickly lifted the phone up to look at the screen) - perhaps the background parallax is glitching the system to a software reset? If my problem persists I may temproarily disable the parallax to see if that mitigates the resets.
To be clear, the update to iOS 7 didn't precipitate this problem, and I updated to iOS & on the day of its release (9/18).
This used to happen to me sporadically on my iphone 4s on iOS6, usually when my battery was anywhere at 40% to 5% - though I suspect that was because I was due to re-set the battery by completely draining it.
Is anyone else having this issue with their iPhone 4S?
I'm using a Verizon iPhone 4s 64 GB, still in excellent condition.

Why it takes long time to establish Database Connection ???

Can any one please have a look on the following code snippet and show me which mistake I'm doing so it take long time to connect to DB(more than 5 minutes !!!!)
Thanx in advance ...
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Class.forName("oracle.jdbc.driver.OracleDriver");
String dbString2 = "jdbc:oracle:thin:@" + "127.0.0.1" + ":" + "1521" + ":" + "nat";
aCon = DriverManager.getConnection(dbString2, "scott", "tiger");
stmt = aCon.createStatement();
System.out.println("Connection to DB Established");
catch (ClassNotFoundException cnfe)
System.out.println("Class not found:");
cnfe.printStackTrace();
catch (SQLException sqle)
System.out.println("SQL Exception: " + sqle.toString());
sqle.printStackTrace();

Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Why do you need this if you are going to Oracle. Try
removing this. It might be trying things out with the
old driver and then moving to the new driver. This has nothing to do with it. (And it doesn't "try things out")
>
Also check your machines. They might be slow. There is
no reason, it should take more than few hundred
milliseconds to connect to a database on localhost as
your case is.Possible reasons...
- Network traffic
- Faulty router/gateway
- Busy server
- Faulty network card (either end)
- Conflict with another box

IPhoto automatically shuts down after attempted upgrade

I have the latest version of iPhoto, but when I try to open it, I get the following message:
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
When I hit "upgrade," it just shuts down. No upgrade. No iPhoto.
Anything I can do?

As a test dpress and hold the option key while launching iPhoto and create a new test library - import a few photos into this test library and report back with the results of this test
LN

WAN MINIPORT ERROR AND TAKES A LONG TIME TO SHUT DOWN

Few days before,my device manager was showing yellow exclamation mark in wan miniport(ikev2),SSTP and another area, which i can't remember.So i searched on forums and use another software to fix this.The link to website is - https://www.vpnhosting.cz/index.php/clanky/wan-miniport-repair-tool-solve-vpn-and-dial-up-error-code-720-and-similar-ppperrors.html
i followed the process but now when i boot my laptop it does not show wan miniport driver initially on device manager .After long hours it shows wan miniport drivers but again with yellow excamation mark.I think it tries to install the driver at the beginning.Now
the problem is, when i shut down it takes a very long time with a huge fan operation noise.Many times it goes in to hibernation state to avoid overheating.Sometimes i have to forcibly shut down using the power button.Now when i start it , it again
does not show wan miniport drivers in device manager.This way the cycle continues and many times my laptop does not get a proper shut down.What do i do? please help me..

Hi,
May I know thw error code displayed in the problematic wan miniport drivers? Code 720 as in the link you post above or other error code?
This link can be helpful for further troubleshooting (please create a restore point before making changs to the system in case any incorrect operations can cause unexpected issue)
Fix Broken Wan miniports
http://community.spiceworks.com/how_to/show/55611-fix-broken-wan-miniports
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Why it takes long time to execute on Production than staging?

Hi Experts,
Any help apreciated on below issue.
I have one anonymous block for updating around 1 million records by joining 9 tables.
This is proceeded to production by following environments. And all env have exact equal volume of data.
development->Testing->Staging->Production.
The funny problem is while it takes 5 mins to be executed in all environments, it takes 30 mins on production.
why it happned and what can be action points for future?
Thanks
-J
==============
If the performance is that different in the different environments, one or more statements must have different query plans in the different environments. The first step would be to get the query plans and compare them to figure out which statement(s) is/are running slowly.
If there are different query plans, that implies that something is different between the environments. That could be any of
- Oracle version
- initialization parameters
- data
- object statistics
- system statistics
If you guarantee that the data is the same, I would tend to expect that the object statistics are different. How have you gathered statistics in the various environments? Can you move statistics from an environment where performance is acceptable to the environment where performance is unacceptable?
I would also recommend following the advice others have given you. You don't want to commit in a loop and you want to do as much processing in SQL as possible.
Justin
===============
Thanks Steve for your inputs.
My investigation resulted following 2 points.
There are 2 main reasons why some scripts might take longer in live than on Staging.
1: Weekend backups were running on the live server so slowing the server down allot.
2: the tables are re-orged when they are imported into staging/Dev – so the table and index layout is optimal, on live the tables and indexes are not necessarily contiguous so in order to do the same work the server will need to do many more I/O operations.
Can we have some action points to address these above issues?
I think if data can be contigous then it may help.
Best Regards
-J
===============
But before that, can you raise this in a seperate thread as there is a different issue going on in this thread?
Cheers
Sarma.
===========
Posts: 4
Registered: 08/28/06
Re: Performance issue (Oracle 10.2.0.3.0)
Posted: May 22, 2009 2:46 AM in response to: Radhakrishna Sa... Edit Reply
Hey Sarma,
Exterme aplogies to say that I don't know how to raise a new thread.
Thanks in advnce for your help.
-J
user636482
Posts: 202
Registered: 05/15/08
Re: Performance issue (Oracle 10.2.0.3.0)
Posted: May 22, 2009 2:51 AM in response to: user527345 Reply
Hi User 527345,
Please follow the steps to raise a request in this Forum.
1. Register urself.
2. Go to the forum home and select the Technolgy where do you want to rasie a request.
eg : If is related to Oracle DATAbase general then select Oracle databse general...
3. clik on post new thread
4. Give the summary of your issue.
5. then submit the issue.
please let me know if you need more information.
Thank you

Jayashree Mohanty wrote:
My investigation resulted following 2 points.
There are 2 main reasons why some scripts might take longer in live than on Staging.
1: Weekend backups were running on the live server so slowing the server down allot.
2: the tables are re-orged when they are imported into staging/Dev – so the table and index layout is optimal, on live the tables and indexes are not necessarily contiguous so in order to do the same work the server will need to do many more I/O operations.
Can we have some action points to address these above issues?
I think if data can be contigous then it may help.First , I didn't get at all what actually was that thing when you copied some part of don't know which post in your actual question? Please read this , it would help you post a proper question to get a proper answer ,
http://www.catb.org/~esr/faqs/smart-questions.html
Now, how did you come to the conclusion that the backups are actually making your query slower? What's the benchmark that you lead to this? And what's the meaning of the 2nd point , can you please explain it ?
As others have also mentioned, please post the plan of the query at boththe staging and production, that only can tell that what's going on.
HTH
Aman....

TS4185 My Face Time always shuts down after using it for about a minute. Can anybody suggest a way to stop this happening?

Hi. My Face Time continuisely shuts itself down after about a minute of use. Can anyone suggest what might be causing this and how I can sort it out. This only happens on my MacBook Pro and not on any of my other devices.

Creating a new profile and deleting the old one seemed to fix the problem. Why the problem occurred in the first place, is beyond me. But after creating the new profile, restoring all my bookmarks, and reinstalling Flashgot, everything seems to be behaving wonderfully. For anyone else having similar issues, I recommend creating the new profile. It's easy to do, as long as you save your old one, so you can copy all the necessary files to restore your preferences and bookmarks.

Satellite A100 shuts down after memory upgrade

Consider me as 1 of the thickie bunch.. Not even sure wot im talkin bout but here goes n e way...........
Have a Satellite A100 570 ( PSAA2E)..........
Have tried several different online sites lookin for memory upgrade. Didn't have the witt to use toshiba site...... Ended up going with Crucial.........
Ran diagnostic on laptop and was sent the module a needed.or so i thought....... wrong 1 or 1s as i bought 2 x 1G modules in order to " double up".....
Got my money back as they were not compatable with my system.. something to do with density problems....
Tried company called OFFTEK........ they seemed to know what they were talkin about....... I have from Offtek. at present a..........
200 Pin 1.8v DDR2 PC2-4200 SoDimm....... but Toshiba have recommended below......
1GB PC2-4300 DDR2 Memory (533MHz)
Part Number: PA3411U-2M1G
1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
Theres an obvious difference ...... 4200 and 4300. But im not sure if its a significant difference........... or what it means
Have updated bios to most recent version and basically updated everything toshiba had to offer for this model...........
Ran EVEREST and it recognises the 1G module but when i take out the original 512mb module the laptop starts for about 3 seconds then shuts down...
this repeats about 5 times then complete shutdown.....
I dont like opening the back cover too often but this is the 3rd module ....
Not sure whats meant to happen if the module is working...i.e start up message..not sure if windows recognises 1G module....
Would it be safer bet to send Offtek module and stick with toshiba option.....
Thanks in advance.....

Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
N e way......... checked out the link u posted..........very useful......
The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

Why it takes long time to shut down after i upgrade to OS X ver 10.8.2?

Similar Messages

Maybe you are looking for