Why it took too much time to buy Macbook air with upgraded in Cambodia re-sellers apple license shop, it is already 3 months and still not come yet.
I have ordered a Macbook air 11' since April 2013, until now I do not receive yet. The store in Cambodia was accredited by Apple as product resellers. They told me that the apple distributer is not responded to their request. UMMMH
Read your post twice, however it contains one glaring error, you only mention a "NEW" battery in the last paragraph. I love your spirit of fixing the Air , I used to fix laptops long ago. So what is a "NEW" battery vs. a new battery. CLARIFY.
Alas however days of "fixing" things on notebooks ended a long time ago, now its just:
1.locate bad
2. toss bad part
3. insert new part
Only 3 important sections in the above post:
The new I/O board works, but only when the battery isn't plugged in to the logic board. Once I unplug the battery, the AC charger's green light goes on and it'll boot. If I plug the old battery in, the green light goes on and the computer will boot, but it still says no battery is installed.
My first step was to open it up and look for corrosion. There was a bit and I spent a few days cleaning it off with a kids' toothbrush and 99% alcohol
battery connector on logic......, but there was rust on half of the connectors
Your logic board is kaput.
However since your information above is contradictory about "new" battery, since you dont indicate anywhere you HAVE 2 batteries, mere corrosion at the logic board is insufficient to determine dead logic board, ...try ANOTHER battery as last eliminative causation.
If 2 batteries fault, your logic board is dead
Salvage parts for resale, cost of logic replacement and removing (I assume a good SSD) the SSD is too high vs. a new Air, or a "new" used Air.
Similar Messages
-
Large records retrieve from network took too much time.How can I improve it
HI All
I have Oracle server 10g, and I have tried to fetch around 200 thousand (2 lack ) records. I have used Servlet that is deploy into Jboss 4.0.
And this records come from network.
I have used simple rs.next_ method but it took too much time. I have got the only 30 records with in 1 sec. So if I want all these 2 lacks records system take around more than 40 min. And my requirement is that it has to be retrieve within 40 min.
Is there any another way around this problem? Is there any way that at one call Result set get 1000 records at one time?
As I read somewhere that “ If we use a normal ResultSet data isn't retrieved until you do the next call. The ResultSet isn't a memory table, it's a cursor into the database which loads the next row on request (though the drivers are at liberty to anticipate the request). “
So if we can pass the a request to around 1000 records at one call then maybe we can reduce time.
Has anyone idea How to improve this problem?
Regards,
Shailendra SoniThat true...
I have solved my problem invokeing setFetchSize on ResultSet object.
like ResultSet.setFetchSize(1000).
But The problem sorted out for the less than 1 lack records. Still I want to do the testing for more than 1 lack records.
Actually I had read a one nice article on net
[http://www.precisejava.com/javaperf/j2ee/JDBC.htm#JDBC114]
They have written a solutions for such type of the problem but they dont give any examples. Without examples i dont find how to resolve this type of the problem.
They gave two solutions i,e
Fetch small amount of data iteratively instead of fetching whole data at once
Applications generally require to retrieve huge data from the database using JDBC in operations like searching data. If the client request for a search, the application might return the whole result set at once. This process takes lot of time and has an impact on performance. The solution for the problem is
1. Cache the search data at the server-side and return the data iteratively to the client. For example, the search returns 1000 records, return data to the client in 10 iterations where each iteration has 100 records.
// But i don't understand How can I do it in java.
2. Use Stored procedures to return data iteratively. This does not use server-side caching rather server-side application uses Stored procedures to return small amount of data iteratively.
// But i don't understand How can I do it in java.
If you know any one of these solutions then can you please give me examples to do it.
Thanks in Advance,
Shailendra -
i have been getting this message " no sim installed " too many times then my phone goes off , its iphone 4S , its really a problem i cant get calls or anything and im not sure how to take the SIM out then insert it again , what to do ??
Use the sim tool that came with your phone or a safety pin and just insert it into the hole at the side of the sim tray and push it in and then pull it out. It is no more difficult than that and then just close it again.
-
I need to buy Macbook Air with MS W7 Pro. How?
I need to buy Macbook Air with MS W7 Pro. How?
If all you need is Office then you dont need Windows 7 as there is already a version of Office which will run on a Mac. Its called Office 2011.
You can get it from the mac store or anywhere else that sells office
http://store.apple.com/us/product/HB604LL/A/microsoft-office-for-mac-home-and-bu siness-2011?fnode=000104090a -
Is it possible to buy macbook air with russian keyboard?
Is it possible to buy macbook air with russian keyboard?
Ilya82 wrote:
Is it possible to buy macbook air with russian keyboard?
You should contact an Apple retail store and ask if they can make a special order for you.
http://www.apple.com/retail/ -
trying to connect time capsule to macbook air with the ethernet cable in the WAN port but the airport utility doesn't detect it but when i put it in the LAN one it does but it doesn't let me configure
any ideas?Isn't it fun trying to do things without an ethernet cable direct to the computer.. Apple sell a usb to ethernet adapter cable fairly cheap.. makes life a lot easier having something to do hard connections.. or as hard as usb can manage.
Since you have to access the TC by wireless .. press and hold the reset button on the TC for about 10sec until front led flashes rapidly.. don't worry about the ethernet cable.. leave it disconnected.
Now click on the airport symbol and join another network. The TC should revert to its home name.. which will be a combo of Time Capsule and its MAC address. There is no wireless security and you can do the setup. -
How can I buy macbook air with students offer
Plzz tell me how can I buy macbook air in india with students discount
Hey akshar123,
Thanks for the question. I found the following information which may help to resolve your question:
http://www.apple.com/in/buy/
Where can I buy Apple Products?
Are discounts available?
Education
To get discounts for Education, call Sales on 1800 425 4646 (toll free) or 080 2574 4646, SMS "SALES" to 54646 or email [email protected]
Thanks,
Matt M. -
Why it takes a long time for my MacBook Air to turn on?
I brought my MacBook Air at a Power Mac Center to fix vertical lines on the screen. The vertical lines were removed. But since then, when I turn on my laptop, it takes a long time before it actually turns on. Sometimes, after pressing the power button, something seems to run at the upper left corner of the keyboard (near the power adapter) but it takes me practically hours before it actually turns on.
And when it is turned on already, I observed some unusual behaviors happening:
- Sometimes, while it is turned on, the battery status in the menu bar looks operating normally, but after a while, the trackpad will no longer work until the battery status says, "No Battery Available" and "Power source: Power Adapter".
- Sometimes, several horizontal lines appear on the screen then after a while the laptop will hang up.
- Sometimes, the sound sounds abnormal then after a while the sound no longer operates, and when I check the Sound at the System Preferences, it says, "No input devices found"
- Several applications do not work anymore, like Calendar, TextEdit, Reminder, Facetime, Preview and others.
Please help me figure out the problem. I cannot use my laptop as regular as before. I can no longer catch up with paper work deadlines because of these problems.Please, help me. I need an immediate response so I could try to fix the problem because I need to use my laptop right away. Pls help.
-
Could I have been sold an older model? (And yes, it was in its original packaging.) At the time, I was told that it was because I bought a maxxed-out unit, and that those tend to "sit on the shelf" longer than the less expensive units. I'd appreciate any advice.
Welcome to Apple Support Communities
To check if you have got the most recent MacBook Air model, open > About this Mac > More Info. If you see you have got a Mid 2013 one, you have got the most recent MacBook Air.
Note that you may have purchased a Mac which was manufactured before the Mavericks launch (in October 2013). You can check which OS X version your Mac has got in > About this Mac; 10.9 is the most recent version, and the latest update for OS X Mavericks is 10.9.2. -
How much memory can my Mac Book take?
Below is the spec:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Thanks - Sebon a similar note, I have 4GB in my 4.1. I take it that is it's max?
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f3 -
I have new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air without any problems. Now I'm trying to migrate more files, music, etc. and I keep getting the continuous spining circle with "Looking for Other Computers." I've tried everything and for some reason it is not finding my PC. What am I doing wrong?
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
ROWSET taking too much time to populate
Hi ,
I have a problem with ROWSET.
I have a table with 6 columns and approximately more than 200 records.
I reterive them in a ResultSet and resultset gets populated.
But when I populate Rowset with that ResultSet then it hangs for atleast 1 minuate and then it comes back to its original state.
Can anyone have the idea why it happens....?
Is there any issue with the Rowset ?
Why it takes too much time to populate the rowset..?
CachedRowSetImpl crs = new CachedRowSetImpl();
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_READ_ONLY);
ResultSet result = stmt.executeQuery(sql); // Here we have 250 records in ResultSet
crs.populate(result); // This is the problem. This line takes atleast 1min to executeThanks
TariqI think this Java Forum is not the right FORUM for
me.....I think you are right. This is NOT the FORUM for YOU.
I think u (So Called GURUS) all need to work on JDBC
more and on large application so that u should be
able to solve complex problem.
THIS is PROBABLY not the BEST way for YOU to get HELP
I hope u will work on my suggestion...
I HOPE you CHOKE on a TURNIP and DIE.
Thx
Muhammad TariqFuck you.
On your way out please make sure to stop in at Google and search for "Forums for arrogant fuckwits". That's the kind of resource you need. -
Application diagnostics taking too much time
EBS Version : 12.1.3
Application diagnostics taking too much time. How do i investigate why its taking too much time? and then also I want to know How do i cancel this request?Application diagnostics taking too much time. How do i investigate why its taking too much time? and then also I want to know How do i cancel this request?
Is this happening for all diagnostics scripts or specific one(s) only?
E-Business Suite Diagnostics Installation Guide (Doc ID 167000.1)
E-Business Suite Diagnostics References for R12 (Doc ID 421245.1)
E-Business Suite Diagnostic Tools FAQ and Troubleshooting Guide for Release 11i and R12 (Doc ID 235307.1)
You can it from OAM and you might need to cancel the database session from the backend as well.
Thanks,
Hussein -
Dropping Index taking too much time
Hi, I am trying to drop an index. Its not yet finished... why its taking too much time to drop?
Please put your suggestions..
RgdsSQL> drop index QS_TEXT_MST_IXCON force;its taking too much time ... after 2 hours i terminated the session.
When i check that index status ...
SQL> select index_name,status,DOMIDX_OPSTATUS,DOMIDX_STATUS from user_indexes where table_name='QS_TEXT_MST';
INDEX_NAME STATUS DOMIDX DOMIDX_STATU
QS_TEXT_MST_IXCON VALID FAILED VALID
QS_TEXT_MST_PK VALID
SQL> create index MAMPROD.QS_TEXT_MST_IXCON on MAMPROD.QS_TEXT_MST(UPD_FLG) indextype is ctxsys.context
parameters(' datastore QS_TEXT_MST_IXCON_DST'); 2
create index MAMPROD.QS_TEXT_MST_IXCON on MAMPROD.QS_TEXT_MST(UPD_FLG) indextype is ctxsys.context
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10507: duplicate index name: QS_TEXT_MST_IXCON
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 364wot to do? -
Fcp x 10.1.4 suddenly take too much time to start ?
Fcpx 10.1.4 suddenly take too much time to start ?
Im working on the new retina imac 27 5i standard setup
everything was working nice and smooth
yesterday after i uninstall some plugins fcpx & motion become very slow start up
almost like its been remove from the fast fusion part of the Hd ?
Thanks
GilSame problem. Very, very slow Start after Yosemite 10.10.2 beta Update an Final Cuty 10.1.4.
Maybe you are looking for
-
How do I sign out of the App Store so that I can sign back in with the correct apple ID?
I needed to change my apple ID, which I did through Apple support today. Now I need to get out of the default old ID to update my apps. How do I do that? The correct ID is showing in the settings section. Thanks!
-
ITunes Error Message required files are missing - can't run
Plugged my iPod Nano in and my iTunes gives error "iTunes cannot run because some of its required files are missing. Please reinstall iTunes". Tried to reinstall iTunes and get same error.
-
Game controller for intel Mac pro
Any suggestions for a game contoller for an intel Mac pro? I've had no luck with tatieboggle or with the Logitech f710 wireless. Running latest system. Thanks!
-
Upload media file and submit data in a same time
Hi, I'm trying to submit data and upload file in a same time to a web page(which is jsp). But i found that the method used to upload file and submit data are different. Method used to submit data :- PostMethod post = new PostMethod(wbIndex);
-
Syncing pictures from photo version 1
On my MAC, iPhoto is no longer available and has changed to Photos. I have been syncing my iPhone in iTunes with the option to sync pictures from iPhoto. This apparently is no longer working. I have selected the "Copy photos from:" to Photos, but