Why itune and my computer cannot read my iphone?
why itunes and my computer cannot read my iphone when i plug it into my computer?
Try http://support.apple.com/kb/HT1808
Similar Messages
-
my warrently already over..
and i lived in singapore..
solutions please...
<Personal Information Edited by Host>Try http://support.apple.com/kb/HT1808
-
plz help me how to fix this.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.
Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions? -
Whenever i try and download itunes it says it cannot read from specified device, what can I do?
Whenever I try to download itunes it says it cannot read from specified device, what do I do?
Honestly, these are WAGs but they're all that I can think of.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again. -
I recently purchased a Mac OS X 10.6.6 which was an upgrade from my Mac OS version 10.4.1.1 I downloaded the Adobe Photoshop CS2 which I had on my old computer and now it cannot read my NEF files which is a RAW file from my Nikon D200. I did not have this problem on my old Mac. I always shoot RAW and can't open any photos. Can anyone help me PLEASE?!?
Do you have access to another Mac to see if the disk can be read by it? If it can't then you're pretty sure it's the disk. If it can then there may be issues with your optical drive which might be cleared up by using a cleaning disk on it, one that uses dry brushes (no liquid).
If you have access to another Mac and it can read the iWork disk make a disk image of it so you can move the disk image to your iMac and install from the disk image.
OT -
I am trying to download the newest version of itunes and my computer says that it cannot find bonjour file? it will also not let me remove the existing bonjour or itunes program? any help?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Using Lightroom 4 w/ Windows 7. Recently started shooting w/ Sony camera that shoots .arw files. Lightroom cannot read the files. Loaded Adobe converter program onto the computer and this program cannot read the files either. Any suggestions?
Thnx again for the reply. The version of Lightroom I have is 4.0 (working w/Windows 7) This computer and all media files are kept off-line After doing more research, I downloaded DNG Converter 7.1This loaded into a .zip folder, which I am planning to install into the off-line computer andrun. Where does this folder go?
And will this set up work with my version of Lightroom?
What a pain. Makes me wanna go back to shooting .nef files for all stills
Thnx -
When I plug the iPod into the computer, it continues as normal to upload the iPod.
However, after a couple of seconds of trying, my computer comes up with a message saying that the iPod update attempt has failed, and that it cannot read or send to the iPod.
I was under council to reset my iPod, as it still showed up on the screen. It erased the iPod as directed, and there is nothing left on the iPod.
When I go into playlists, all of my playlists are there, but no music. Same with the Podcasts.
Now, I have an iPod with no music, and no way to get music on to it.
HELP?!?!?!?Try here.
"Disk cannot be read from or written to" error syncing iPod in iTunes. -
I rented a movie through itunes and now I cannot find it on the ipad. How do I access it?
I rented a movie through itunes and now I cannot find it on the ipad. How do I access it?
Mmmm, try checking for available downloads from the store menu, if that doesn't help, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.
-
hi all, i just updated my iphone 3gs with 5.0 ios version and now i cannot configure the iphone with it because itunes is not recognizing my iphone
Contacts are NOT part of the iTunes backup. If you had read the User Guide when you got your phone, you would have learned that Apple recommends you synch your contacts for safekeeping to your computer (Outlook, Address Book) or a cloud service. Using the phone as your only source of your contacts is foolish as the phone can easily be lost, damaged, stolen, or the data become corrupt.
If you've been using your phone as strongly recommended, your contacts are safe and sound on your computer or cloud service ready to be synched back to your phone. Of course, you should be backing up your computer regularly as well.
If you haven't been doing this, your contacts are likely gone. -
after updating my ipad 2 to ios5 it got stuck on the conect to itunes and the computer does not recognize it. what do i do?
You cannot update an iPad 2 to iOS 5 at this time, only iOS 6.1.
-
Hi I just upgraded software through iTunes then unplugged iPhone now it is stuck on the connect to intunes screen, it won't turn off and iTunes and my computer won't recognize my phone? Please help
My phone is doing the same thing. My computer acknowledges that I have connected my iPhone 4, however, iTunes will no longer connect or sync to my iPhone 4. I have uninstalled iTunes, Bonjour and all Apple products from my pc. I have re-installed them back on. I have reset my phone. I have emptied my temp folder. I have done everything. If my iPhone cannot update and sync with iTunes then I may as well get another phone from somewhere else. I am disappointed that I cannot resolve this issue.
Rebeccaspe31, were you able to resolve your issue? If so how? -
I tried to install the latest vversion of Itunes and now I cannot open it because it says this version is corrupt and I should reinstall it. I have no idea what to do. Any help will be appreciated. Thanks
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.
Maybe you are looking for
-
I was playing a game yesterday and it suddenly went into a black screen. Ctrl + Alt + Delete didn't work so I tried Alt + F4 and that didn't work either. I force powered off and when I tried to use it today a blue screen came up saying: [Recovery You
-
Reset the control numbers in Oracle B2B
Is there a provision for reseting the ISA / GS control numbers for outbound documents in B2B ? We are presently moving from an older EDI translator to B2B, and the requirement is to ensure that we start from the next number that the older translator
-
can i declare a structure as in C language, then to use it as an array..... but this time i want to use java.... how can this be done... let say my structure have studid and age, i want my array to be of size 3.... pls help
-
Smart Build Bug? Reflections/Shadows missing from newly added graphics
So, you create a smart build - I have seen this with both dissolve and turntable - with say 5 images in it. You apply a shadow and reflection. I know, overused, but that's for a different forum. You then add a new graphic to the build - anywhere. Tha
-
Keeping page size universal (to fit 100%)
Hello- Is there code to make my page at full screen, no matter the size of the users monitor? I'd like to let the viewer see the whole page at once, without scrolling. What is the standard webpage size? Thanks for your help- BobbiJo