Why iTunes Stops Playing When The Microwave is On?

Today I have noticed that my iTunes is disrupted when the Microwave is On. If the microwave can affect the transmission of data, etc. then I suspect this will also have some consequences in your personal health. Will appreciate if anyone could give me some advise and your experience with microwave operation and Wi-Fi signal disruption. Health consequences?
Information about the equipment I'm using:
iMac Intel.
OS X Version 10.9.2
Your comments on this subject will be appreciated.
MadCat

What you need to do is move your Mac and Microwave further apart from each other, and on a different electrical circuit, so there is no interference. It isn't anything affecting your personal health any more than standing in front of your Microwave oven waiting for the popcorn to be done. It is probably electrical field interference and related issues, though.

Similar Messages

  • I need to play a song on a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through the whole presentation ? Thanks.

    I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
    Thanks.

    Drag the file into the audio window in the Document inspector...

  • TS3700 music stops playing when the screen goes dark, but the earbud jack is flush with the iPod. The Jack is hard to push in now. what is the problem?

    Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?

    And you are positive the white part of the headset is flush with the body of the Nano?
    Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
    B-rock

  • TS3700 I am facing this issues that music stops playing when the display goes...Please help me with this...:)

    I am facing this issues that music stops playing when the display goes...Please help me with this...:)

    Did you see the article linked at the top of this page?
    iPod nano (6th generation): Music stops when display turns off
    B-rock

  • Itunes stops playing and the screen goes dark

    Hi, I have macbook pro 13" and had never experienced this until yesterday and today. The itunes stops playing music, the screen goes dark and it's still charging. Has anyone experienced it?

    Boot from you install disc, run Disk Utility. The startup disk may need repairing.
    Using Disk Utility to verify or repair disks

  • Why does my iTunes stop playing when I close the lid on my laptop?

    I am playing iTunes on my Vista laptop and my setting are 'do nothing' for both powered and battery use, but when I close the lid iTunes stops playing music. Does anyone know why and how I stop it? Please don't say "don't close the lid..." Thanks.

    You have your answer... there is no way to stop iTunes from stopping playing music when the lid is closed.
    You can try adjusting the power settings, but if that's not working...there is no way for iTunes to override it.

  • HT4211 why youtube stops playing when you want to see your facebook status

    i am a new user of iphone , i want to know why does youtube stops playing when you switch to another app, why cant it continue playing while we check someother app.

    Probably because Google did not program it to keep running in the background.
    Its up to the App developer to provide this functionality.

  • Why is my music stop playing when the backlight turns off?

    Hi I got a new iPod classic about 2 months ago and now every time the backlight turns off it stops playing music. Can somebody help me because the only solution I found was to put my backlight to ''always on''

    This is usually a sign that your headphones are not plugged all the way in.  Make sure the white part of the headset is flush with the body of the Nano and no silver from the plug can still be seen.
    If you are 100% positive that the earbuds are all the way in, double check to make sure the headphone jack is clean and clear of debris and/or damage.
    B-rock

  • Vocal backing track stop playing when the cycle button is pressed.

    I am running the vocal backing track in Mainstage2.  I have various markers throughout the backing track, however, when I press the cycle button, the backing track stop playing and reverts to the start of the track.  Anyone know why this is happening?   

    Hello,
    Will try to explain how I understand the way a Question slide works:
    on the timeline you see a pausing point, this will be used twice
    when the user clicks on the Submit button, playhead is not released but the Success/Failure captions pop up, but you cannot control anything else such like stopping the audio
    when the user presses Y or clicks on the slide, the playhead is released, the Success/Failure actions are executed and (eventually - unless you changed navigation by those actions) the user is navigated to the next slide
    First thing you can change is the pausing point of the question slide, but once an audio clip started playing, this will continue and thus not solve your problem.
    It is only in that second step that you can do more customising by changing the Success/Failure actions, perhaps to an advanced action.
    Are you using this default behavior? And the audio is attached to what: to the slide or to the text captions for the questions and to the Success/Failure captions for the answers?
    I think the solution will be to skip the first step, by deleting the Success/Failure captions. When clicking on the Submit button in that situation, the Success/Failure actions will be executed immediately (and the playhead will be released). Attach the audio for the questions to an invisible object (rectangle without fill or stroke), that you hide with the advanced actions to be triggered by Success/Failure and show custom Text Captions for Success/Failure with audio attached to them. Because the playhead is now released, you will either have to time correctly so that the user will have to listen to the audio totally or to insert a static button widget that pauses the slide. But here I'm a bit stuck because I do not know which version of CP you are using, please?
    I blogged about using audio objects a while ago, but did not offer detailed explanations because no one asked for it until now. Have a look:
    Playtime with audio and widgets
    Lilybiri

  • Song from iTunes stops playing in the middle, only on iPod...

    I have a song I purchased from iTunes.  It plays all the way through on my PC, no problem.  But when I try to play it on my iPod, it stops at the same point, every time, about half way through the song.  I'm guessing it's a bad sync, but I'm not sure how to resync just one song.  What is the best way to do that?  And does it sound like my assessment is correct?  Thanks.
    Andrea

    How you remove and resync that one track depends on how your iPod is set up to sync music from your iTunes library.  For example, you have your iPod configured to sync only checked songs and videos, simply remove the tick mark next to the song in your main iTunes library and then resync your iPod.
    It might not be a bad idea to try and convert it to another format as well to see if that resolves the issue. Here is more on converting the track using iTunes.
    http://support.apple.com/kb/ht1550
    B-rock

  • Why iTunes stops working when I try to view any video / movie trailer from my library or iTunes Store?

    Since i have the 10.6 / 10.7 / 11 iTune's version when i try to see my movies, from my library, or movie trailers from iTunes Store, the program stops working... I don't have idea about this problem, what happened?
    Thank you

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I am facing this issues that music stops playing when the display goes...Please help me with this, I already reset and checked headphones still quits working.

    My IPod Nano stops playing music when display goes out.  I already tried the resolutions suggested and still having problem.  Please help!

    i've had my ipod for awhile and it just started doing this - last night.  it plays for about 30 seconds and stops.  i press play again and it restarts where it had stopped.  i had wondered if i had accidentally set it to 'sample' or something.

  • ITunes stops playing and cannot connect to Remote app whenever the computer display turns off??

    I have a Windows system with iTunes, and an iPhone with the Remote app installed, through which I use to play music on iTunes. Until recently iTunes would play regardless of whether my monitor was on or not, and I could connect to iTunes with the Remote app regardless of the monitor state. Now, however, after updating both iTunes and Remote with the new versions that came out around the time of the iPhone 4S release, whenever my computer turns off my monitor, iTunes stops playing at the end of the current song and the Remote app cannot find iTunes. This is not a system sleep state, I just have the power options set to turn off the monitor after 15 minutes of inactivity. Sleep and hibernate are disabled on the system and always have been, expressly for the purpose of allowing iTunes playback via Remote. If I jiggle the mouse and the system turns the monitor back on then I can manually reenable playback, and Remote can connect to iTunes again. I can't find any setting in Preferences that would control this. How do I fix this? Thanks.

    I'm so glad someone else is having this problem.  I am in exactly the same situation!
    1. Windows Vista
    2. Upgraded iTunes to 10.5 and upgraded remote with iOS 5
    3. My computer has never been set to sleep, but the monitor turns off after 20 mins.
    4. If the monitor goes to sleep, itunes stops streaming music and Remote can't connect to it
    5. If I change my monitor off time to 1 hour, then in 1 hour itunes will stop streaming - it is ABSOLUTELY connected to the monitor sleeping.  Almost like iTunes can't connect to the network the the monitor is off.
    Please help!  I have been using remote for a year and this didn't happen until I upgraded to iTunes 10.5.

  • IPod no longer stops playing when a podcasts ends

    Starting with iPod software 2.1 and iTunes 8.0, my iPod Touch 1st Gen. no longer stops playing when the end of a Podcast is reached. It will start playing the next Podcast episode in the list although that is an older podcast that I have already listened to.
    Prior to these software updates, I would be listening to, let's say, the MacCast podcast number 100, when it finished, the iPod would stop. I could then go up the list and play a newer episode or switch to a different podcast. However, now, once episode 100 finishes, the next episode down the list is number 99 and it starts playing automatically (even though I have already listened to it).
    Is there some new setting I am missing? Is anyone else having this problem?
    Regards,

    It's a new "feature" of the latest firmware upgrade.
    I personally hate it.
    Send Apple feedback here:
    http://www.apple.com/feedback/

  • Sounds stop playing when user locks screen on iOS with AIR 3.9 Beta

    We built a simple application that should play sounds when in background and when the screen is locked.
    Since we updated to the latest AIR 3.9 Beta SDK, all sounds stop playing when the user locks the screen on iOS.
    The sounds resume when the screen is unlocked.
    - it works on Android
    - we use renderMode : cpu
    - we use UIBackgroundModes : audio
    - we use NativeApplication.nativeApplication.systemIdleMode=SystemIdleMode.KEEP_AWAKE;
    - sounds play when the app is in background
    - was working great with AIR 3.8 SDK
    Any help would be greatly appreciated.
    Thanks!

    Thanks for reproting the issue, we have an internal already logged bug for this, which is under investigation at the moment.
    -Nimit

Maybe you are looking for