Why Just Two HDs Showing?

I have a total of four (4) hard drives in my G4 Mac; running Mac OS X 10.4.11 Tiger; but only two (2) show up on the desktop. What should I do to get the other two (2) hard drives to show up?
All four hard drives were showing up on the desktop just yesterday.

Depending on why they don't show up, either check the settings in the General tab of the Finder's preferences, or mount or repair them in the Disk Utility, or click here and follow the instructions.
(84074)

Similar Messages

Why does two iPhones show the same text

MY sons iPhone and husbands iPhones are sharing the same texts and syncing with one another how to do I stop this

Use a different Apple ID for iMessage on both phones. (You can continue to share the same ID for iTunes.)
One of you needs to go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a differert ID. If you are sharing the same ID for FaceTime, do the same thing in Settings>FaceTime to avoid getting each other's FaceTime calls.

Why Cat6500 PE just can only show VPN label without IGP label ?

Hi,there:
We have a couple Cat6500 as our MPLS/VPN P, PE routers. But from the following first command output, we just only can see one label (VPN lable) 339 imposed,can't see the IGP label imposed.
From the second command we can see both IGP and VPN labels (339,224 or 339,20)are imposed.
Is there anybody can point out why the first command just can only show the VPN label ?
We're using Sup720 supervisor and 12.2(18)SXF9 IOS.
6500PE#sh ip cef vrf XYZ 172.212.0.0 255.255.0.0 detail
172.212.0.0/16, version 321, epoch 0
0 packets, 0 bytes
tag information set, all rewrites owned
local tag: VPN-route-head
fast tag rewrite with
Recursive rewrite via 172.17.0.213/32, tags imposed {339}
via 172.17.0.213, 0 dependencies, recursive
next hop 192.168.131.128, TenGigabitEthernet2/5 via 172.17.0.213/32 (Default)
valid adjacency
tag rewrite with
Recursive rewrite via 172.17.0.213/32, tags imposed {339}
Recursive load sharing using 172.17.0.213/32.
6500PE#sh mls cef vrf XYA 172.212.0.0
Codes: decap - Decapsulation, + - Push Label
Index Prefix Adjacency
108775 172.212.0.0/16 Te2/5 339(+),224(+) (Hash: 0001)
Te1/5 339(+),20(+) (Hash: 0002)
6500PE

Hi,Martin:
Thanks for your reply.
I tried these two commands, but just only could get IGP labels(20 and 224), no way to see the VPN label(339).
Any idea ?
Jerry
6500PE#sh ip cef 172.17.0.213 255.255.255.255 detail
172.17.0.213/32, version 1080, epoch 0
0 packets, 0 bytes
tag information set, shared, all rewrites owned
local tag: 171
via 192.168.130.128, TenGigabitEthernet1/5, 11 dependencies
traffic share 1
next hop 192.168.130.128, TenGigabitEthernet1/5
valid adjacency
tag rewrite with Te1/5, 192.168.130.128, tags imposed: {20}
via 192.168.131.128, TenGigabitEthernet2/5, 43 dependencies
traffic share 1
next hop 192.168.131.128, TenGigabitEthernet2/5
valid adjacency
tag rewrite with Te2/5, 192.168.131.128, tags imposed: {224}
0 packets, 0 bytes switched through the prefix
tmstats: external 0 packets, 0 bytes
internal 0 packets, 0 bytes
6500PE#sh
6500PE#show mpls forwarding-table 172.17.0.213 32 detail
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
171 20 172.17.0.213/32 0 Te1/5 192.168.130.128
MAC/Encaps=14/18, MRU=1548, Tag Stack{20}
001A6C9F0A44001CF9B3D0008847 00014000
No output feature configured
Per-destination load-sharing, slots: 0 2 4 6 8 10 12 14
224 172.17.0.213/32 0 Te2/5 192.168.131.128
MAC/Encaps=14/18, MRU=1548, Tag Stack{224}
001A6C9F12BC001CF9B3D0008847 000E0000
No output feature configured
Per-destination load-sharing, slots: 1 3 5 7 9 11 13 15
6500PE#

Why wont my Tv Show Download? it only says "download error. tap to retry" and tapping doesnt work it just keeps on saying the same thing.

Why wont my Tv Show Download? it only says "download error. tap to retry" and tapping doesnt work it just keeps on saying the same thing.

It appears in the download section of my itunes.
I downloaded a season of Iron Man Anime and all of the episodes except episode 1 was downloaded. I looked at the error and it says "error = -50" and when I try to resume downloading, it continues to tell me that there is a download error and it wont resume.
It also says to check my network connection, but I'm connected. So....I'm not sure what to do...this kind of ticks me off.

Why my map dosent show the addresses completly? it just shows the name of the city or in the best way the name of expressway (no matter how much i zoom in)and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

why my map dosent show the addresses completly? it just shows the name of city or in the best way the name of exxpressway and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

Why are there two lines showing when I switch off my iPad where the cancel word is?

Why are there two lines showing on my iPad when I turn it off where the cancel word is.

You wrote:
"I have noticed that on my IPad Calendar, that on some of the scheduled appointments it is showing Phoenix as a time zone. On some it is showing Salt Lake City, and then on others it will show Denver. I can't quite see why or understand why that this is an issue since everything is set to Salt Lake City. On the ones that show up with Phoenix as the time zone the times change. Also I have had some of the times showing on the calendar at an hour different that when I open the Appointment. It will show the correct time, but on the Calendar it is sometimes different. "
From that information, it makes sense that your calendar is off.
Phoenix is in another time zone part of the year. When daylight saving changed, Salt Lake City and Denver changed, but Phoenix did not. You may have set time and date to auto, but the Mac knows the time difference and is compensating for it.

When i go into finder click on pictures why dose it not show all photos just lets me open iphoto

when i go into finder click on pictures why dose it not show all photos just lets me open iphoto

Ralph9430 offers a good suggestion. But you may need to do this before taking his advice:
Check in iPhoto's Preferences (which you can open from the iPhoto menu). Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
If it is set to "iPhoto", you won't be able to get to Image Capture easily.

Why won't google work? whenever i try to go to google it just saya 404 Not Found. Also why won't captcha show up. when i have to type in a captcha to show i'm not a robot the words won't show up.

why won't google work? whenever i try to go to google it just saya 404 Not Found. Also why won't captcha show up. when i have to type in a captcha to show i'm not a robot the words won't show up

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
i don't know why...

Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If this doesn't work, then try the more involved stuff.

Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

Why after update Iso 5 by iPhone and not open, without using Itune. Just screen keep show apple logo for few hours already.

Try to reset - Press both the home and on/off buttons for at least 10 seconds until the Apple logo reappears.

Can you have two slides shows on the one interactive page?

I'm just new at learning interactive pdfs in indesign so sorry if this is common knowledge. I know how to create a slide show on a page, but can you have two slide shows on the one page or more for that matter? (Ideally I need 3.) Each slide show has its own set of images and buttons.

Just :http://www.youtube.com/watch?v=Dm0aeMUPZ4U
But I'm happy to create them a different way if needed be.

Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

Why do some movies show and some others don't?

For some strange reasons different episode of the same series, with exactly the same encoding as the others, don't show on the Apple TV when streaming from iTunes: the files are identical in encoding, yet part of them just won't show. I was wondering if anyone knew how to fix this.
Thank you.

Hello,
I have the same problem.
I am running iTunes on a Mac Mini connected to a Drobo external drive as my media server. I do not sync any movies or TV shows but just stream them when viewing. This works flawlessly in general. However I have 335 movies, all ripped and re encoded using the same method (handbrake). Only 315 of the movies show on the Apple TV movie list. I have two Apple TV devices in different parts of the house and both show exactly the same list of movies. So there are 20 movies that are on the Mac Mini and can be viewed within iTunes on the Mac Mini, but don't show up on the Apple TV list.
I have tried deleting the links to all of my movies and then re established the links by repeating the
Add to Library....
command, but the same movies just don't show up on the Apple TV's.
Any assistance would be appreciated.

Hello, does anyone know why when i drag and drop from the internet,why my images never show up?

hello, does anyone know why when i drag and drop from the internet,why my images never show up?

I'm wanting to drag images from the internet into a folder on my desktop or hard drive. I am used to being able to drag just about any image from any website off the web and into a folder on my old mac, but since I got my laptop, I've noticed I cannot do that. Is it a preference?

Two styles showing

I've got two styles showing for what should be a numbered list.
Note in the image attached the highlighted text has NumberedList2 and BoldName assigned to it. How to fix?
Secondly, why are the styles shown in 2 places--in the upper left corner and also on the Style&Formatting Pod? And some styles are missing from the left corner that are included in the pod?

Top left is the old way styles were applied and it shows paragraph styles only. The new pod shows all styles. Here you have a list style with a paragraph style superimposed. That is OK as per my website but if you don't want the paragraph style, one of the options in that list is None. Use that.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Why Just Two HDs Showing?

Similar Messages

Maybe you are looking for