Why logical partition is a must for voting disk and OCR

Hi Guys,
I just started handling jobs for RAC installation, I have a simple question regarding the setup.
Why does logical partition have to be used for voting disk and OCR?
I tried partition the disk that were provisioned for voting disk and OCR with primary partition but when OUI is trying to recognize the disk, it cannot find the disk that has been partitioned with primary partition.
Thank you,
Adhika

Hello Adhika,
I found it on this doc http://download.oracle.com/docs/cd/B28359_01/install.111/b28250/storage.htm
Be aware of the following restrictions for partitions:
* You cannot use primary partitions for storing Oracle Clusterware files while running the OUI to install Oracle Clusterware as described in Chapter 5, "Installing Oracle Clusterware". You must create logical drives inside extended partitions for the disks to be used by Oracle Clusterware files and Oracle ASM.
* With 32-bit Windows, you cannot create more than four primary disk partitions for each disk. One of the primary partitions can be an extend partition, which can then be subdivided into multiple logical partitions.
* You can assign mount points only to primary partitions and logical drives.
* You must create logical drives inside extended partitions for the disks to be used by Oracle Clusterware files and Oracle ASM.
* Oracle recommends that you limit the number of partitions you create on a single disk to prevent disk contention. Therefore, you may prefer to use extended partitions rather than primary partitions.
For these reasons, you might prefer to use extended partitions for storing Oracle software files and not primary partitions.
All the best,
Rodrigo Mufalani
http://www.mrdba.com.br/mufalani

Similar Messages

OCFS2 , ASM and Raw Device for Voting Disk and OCR

Dear all ,
My manager assigned me to establish a 11gRAC , 3 node on OEL. He likes to locate ASM with datafiles , at the same time, 2 OCR vol on OCFS2 and RawDevice respectively , 2 voting disks on OCFS2 and RawDevice respectively also.
This really annoys me .
Oh all experts, could anybody give me some advices ? Can those stuff be co-existed ?

Billy Verreynne wrote:
MccLok wrote:
My manager assigned me to establish a 11gRAC , 3 node on OEL. He likes to locate ASM with datafiles , at the same time, 2 OCR vol on OCFS2 and RawDevice respectively , 2 voting disks on OCFS2 and RawDevice respectively also. Not a great idea to introduce additional s/w layers between the CRS software and its OCR and voting disks. If ocfs2 is for example used as a shared file system for these devices (files), then the ocfs2 cluster s/w needs to be up and running, the shared devices mounted, before CRS can successfully start. Thus any problem with the ocfs2 stack, will impact on CRS. Why? What does ocfs2 buy you in this regard? What are the benefits that justifies the increased complexity and the dependency of CRS on another s/w layer?
Fewer moving parts means less complexity, less stuff that needs to be configured and can go wrong.In fact, some users had perception that " Pay mroe so that Get more".

Voting disk and OCR disk in RAC

Can anyone explain me in basic terms ...
For what Voting and OCR disk are used in RAC.

Hi Francisco,
Thanks for the information.
But i am having lot of doubts in Voting disk and types of heart-beats present in Oracle 10g RAC.
As Oracle says css uses two heart beats 1. Network heart-beat 2. Disk heart-beat
My doubts:
1. How Oracle uses voting disk to avoid split-brain syndrome? OR what is the role of voting disk in split-brain syndrome?
2. How Oracle monitors remote node health?
3. Oracle says there is one more heart-beat where ckpt process keep on writing to control file for every 3 seconds and if it fails lmon process will evict the node....Is it true?
5. Oracle Clusterware will send messages (via a special ping operation) to all nodes configured in the cluster, often called the "heartbeat." If the heartbeat fails for any of the nodes, it checks with the Oracle Clusterware configuration files (Voting disk) to distinguish between a real node failure and a network failure......Is it true? If true then what about the two heart beats(Network and Disk)...why these heart-beats are present or useful?
If possible please clear my doubts by giving some simple examples....
Awaiting for your reply and too much eager to learn and expertise in Oracle RAC architecture before administering it.
Regards,
Yasser.

Voting disk and OCR creation

dear all,
Am installing 11gr2 on solaris 10 update 6. We are planning to have ASM also. So I created 3 users
oraasm-ASM OWNER
oracrs-clusterware owner
oracle-oracle database owner.
Now the question is :
Do I have to configure SSH for all the 3 users ?.
Clusterware installaltion should be done by oracrs user and database installation should be done by user ORACLE ?
How to create Voting RAW Disk and CRS RAW DISK ?
I create 2 directories in
bash-3.00$ cd /test/u03/TEST/
bash-3.00$ ls
OCR VOTE
bash-3.00$ dd if=/dev/zero of=/test/u03/TEST/OCR bs=1024 count=100
dd: /test/u03/TEST/OCR: open: Is a directory
Do I have to user root ?
Please advise as am familiar with installation in windows only
Kai

Hi,
Link:[Duplicate thread|http://forums.oracle.com/forums/thread.jspa?threadID=1014776&tstart=0]
Please avoid duplicate thread in multiple categories.
Regards,
X A H E E R

Why we use different clearing account for GR/IR and planned cost clearing a

My client ask for using same account for GR/IR account and all planned cost clearing account.
i try to convince it should be different accounts but he needs a logical answer.
Why we use different clearing account for GR/IR and planned cost clearing accounts?

Dear friend.
u just tell him while doing GR it will debited n while doing IR it should get credited.hence we need to take diff G/L account or same account.
regds
nasir

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?
I couldnt redeem w/o an apple ID so when i did it asked for a credit card. And I want to discontinue and remove my account from itunes but it wont let me, there is no account discontinue or removal of account

Because too much time has passed I can't edit this into the prior comment, but here is the info regarding reverting to iTunes 11.0.2 (assuming you do have a time machine backup) from https://discussions.apple.com/message/22057703#22057703
W. Raider wrote:
Repairing permissions doesn't fix it.
I reverted to the previous version, 11.0.2.
1. Quit the new crash-prone iTunes.
2. Delete the app.
3. Restore v. 11.0.2 with Time Machine.
4. In your iTunes folder look for a folder called "Previous iTunes Libraries", find the latest one.
5. In the iTunes folder itself you'll see "iTunes Library.itl", delete it (or compress it and save a copy for later just in case.
6. Copy the newest .itl file in Previous iTunes Libraries to the iTunes folder and rename it "iTunes Library.itl".
7. Launch the older version of iTunes.
My crashing has seemed to have ceased with a revert to an older version. I noticed today that the newer crashing iTunes had been launched for hours but not playing anything, when I played internet radio it crashed within 5mins, fed up I reverted to an older version.
Btw, a simpler way to do this is to revert to older iTunes app, then hold Option when it launches and choose an older library.

Why do we have separate apps for phone, messages, and contacts?

I'm trying to reduce the number of apps that I need to run, and this one just boggles my mind.
Why do we have separate apps for phone, messages, and contacts?
The messages is to tightly coupled to the phone, that it doesn't make any sense for them to be separate.
The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?
Does it have something to do with the contacts also being part of email app?
Actually, that's my other biff... why are they entangled as such?
Phone contacts should have phone#, email contacts should have email addresses.
If you want a contact to have both phone# and email address, then the two apps (phone/email) should be combined.

The contacts app is nothing more then looking at the contacts from the phone app.
What's the story here?"
The forums would be full of people complaining that you had to go through an additional step ( opening the phone app) to get to contacts. I use the contacts app from the home screen far more often then I use it in relation to calling someone.
I like the way it is far more than the way you propose.
You can leave feedback for Apple at:
http://www.apple.com/feedback

How to fins path for voting disk

Hi ,
Would like to know apart from crsctl query css votedisk , is there any another method through which we can find the location for voting Disk .
Regards
Arun

Hi,
Try looking in the alert log file.
$CRS_HOME/log/<hostname>/alert<HOSTNAME>.log
find this msg.
CSSD voting file....
Regards,
Levi Pereira
Edited by: Levi Pereira on Oct 20, 2010 8:50 PM

HT201359 Why have I been extra charged for an app and have been billed twice for the same app?

Why have I been extra charged for an app and have been billed twice for the same app?

We are are fellow users here on these forums, you're not talking to iTunes Support here, we won't know why.
I don't know what you mean by 'extra charged' (have you made in-app purchases within the app, or are you in the US and need to add on your state's sales tax to the listed price ?), or have you added or changed your credit card details on your iTunes account ? If you have then each time that you do so a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702
If you've been double-charged then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com .
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am wondering why i am paying about 100$ for 1 line and 2gbs of data and now i see these commercials for 2 lines and 6gbs of data for 100$?

I am wondering why i am paying about 100$ for 1 line and 2gbs of data and now i see these commercials for 2 lines and 6gbs of data for 100$?? Please explain.

How To: Direct Message and AyaniB_VZW

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?

Now correct me if I'm wrong but I am sure I have read that the parallax effect in iOS 7 is the main reason behind wallpapers not being able to be shrunk. However, even disabling the effect will not allow you to resize the pictures like you could in previous versions of iOS, so as Skydiver119 said, it kind of is a glitch. If you are like me, and don't regularly change your wallpaper, then it may be worth creating a photoshop document which is slightly larger than your screen resolution(400px in each direction or so) and then placing your picture to suit, before copying it your device. Obviously, this would not be ideal if you were changing your wallpaper daily or very regularly as it would be a bit of a hassle having to do this every time you wanted to change your wallpaper.
Hope this Helps!

Backup and Restore OCR,Voting Disk and ASM Disks in new SAN-10g RAC

Dear Friends,
I am using 10g R2 RAC serup on Linux
My OCR,Voting Disk and ASM Disk for DBF Files are on a SAN box
Now i am reorganising SAN by scrapping the entire SAN and cretaing new LUN's (It's a must)
so pleae let me know
1) how do i take backup of OCR and Voting Disk from existing SAN and how do i restore it in new LUN's after SAN reorganisation
2) how do i take backup of existing Database's from existing SAN and how do i restore it in new LUN's after SAN reorganisation.
I will be doing it in Planned downtime only
Regards,
DB

For step 1 you should following metalink doc.
For step 2 here is simple backup command script.
I have done this in windows for you.
D:\app\ranjit\product\11.2.0\dbhome_1\BIN>rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Feb 8 21:48:47 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: ORCL (DBID=1299593730)
RMAN> run
+{+
allocate channel c1 device type disk format 'D:\app\ranjit\rman\%U';
allocate channel c2 device type disk format 'D:\app\ranjit\rman\%U';
backup database;
backup current controlfile format 'D:\app\ranjit\rman\%U';
+}+
Regards

Hardware Mirroring for Voting Disk

With Oracle 10g r2 the clusterware installation now allows to use hardware mirroring for the voting disk. My question is does anyone see anything wrong with using the hardware mirroring?

Nope, nothing wrong with it. I also wouldn't know why pre 10gr2 would not allow this since oracle only sees a 'device' anyway and this should be transparent to the clusterware. Definitely do this, especially if you only have 1 voting disk. Otherwise, failure of one disk would bring down you whole rac.

I don't know why but I have Firefox optimized for Yahoo! and I hate Yahoo. Is there someway I can get rid of it and get another version

Not much to add. I hadn't used Firefox for sometime. It was already on my MAC laptop and I had so much trouble with Safari recently that I decided to go back to Firefox. However, I just realized it is called FirefoxOptimized for Yahoo. And I hate it.
Is there some way I can get a plain Firefox ?

Thank you for posting your add-on information. This thread might also be relevant: [https://support.mozilla.org/questions/1057155 How to remove 'Zoom It 1.01' from the extension browser?]

[SOLVED] Wiki page for GPT disks and booting arch using UEFI

Hi guys, I am new to archlinux. I installed archlinux x86_64 just yesterday and I like its customisability. I also like arch wiki. Nowhere else have I seen such extensive documentation, especially about things like HAL, UDEV etc. with proper instructions. Thanks to all archers.
I have installed Archlinux x86_64 in my Dell India Studio 1537 laptop along with Windows 7 Professional x64. Both the OSes boot in UEFI-GPT setup (my UEFI is tianocore.sourceforge.net EDK DUET UEFI64 firmware booting from USB). I boot Archlinux using my own compiled grub2-bzr compiled for both BIOS and UEFI-x64. I have a 1 MB BIOS Boot Partition as required by grub2 for BIOS-GPT booting. My Archlinux system can boot both from bios and from uefi, while Windows can boot only using UEFI.
The official Archlinux installation guide talks about only MBR (or msdos disklabel) partitions and booting from BIOS based systems. With 2TB drives becoming common place and UEFI being implemented (search for Phoenix SecureCore Tiano's 1 second POST operation), I think a proper wiki page describing differences between MBR and GPT, why GPT is better, how to setup arch to boot from GPT. Another page describing steps to setup arch to boot from UEFI (either as a separate page or as an extension of GRUB2 wiki page) is also needed.
Some details regarding Pure GPT (not a Hybrid GPT/MBR setup) and/or UEFI setups :-
Partitioning tools -
GNU Parted for filesystem related tasks
GPT fdisk tool - http://rodsbooks.com/gdisk/ , http://sourceforge.net/projects/gptfdisk/ , pacman -S gdisk (in extra repo) - for non-filesystem related tasks
util-linux-ng fdisk does not support GPT disks
Bootloader - GRUB2 - vanilla grub-legacy does not support GPT and does not support UEFI (Fedora's patched grub-legacy does support both GPT and UEFI) and syslinux does not support GPT (I may be wrong here - seems a gptmbr of syslinux does help in booting from gpt but not sure).
For GRUB2 - Need BIOS Boot Partition to embed GRUB2's core.img in GPT disks - size about 1 MB max - no filesystem
In GPT fdisk partition type code - EF02
In GNU Parted or GParted - bios_grub flag on
For UEFI-GPT booting this special partition is not needed as no embedding takes place. This is needed only in case of BIOS-GPT booting.
Incase of custom kernel configuration - enable CONFIG_EFI_PARTITION for GPT support
CONFIG_EFI for UEFI support (for UEFI even above option required)
CONFIG_EFI_VARS for UEFI Runtime Variables support (optional)
Note: Although GPT is part of UEFI specification, a UEFI system is not needed to boot from/use GPT. BIOS based GPT booting is possible with GRUB2 or Fedora's patched grub-legacy (but not vanilla grub-legacy provided by archlinux). It is also possible to boot Linux in UEFI-MBR setup (again using grub2) but I have not tried it.
Even without UEFI and less than 2TB harddrives, GPT based partitioning has many advantages - secondary GPT header and Partition table, CRC32 checksums. Unique Disk GUID and Filesystem-independent Unique Partition GUIDs, multiple primary partitions (default is 128 partitions, but it can be changed). The only problamatic OS is Windows which does not allow GPT booing unless one has UEFI based system. It allows only UEFI-GPT or BIOS-MBR setups. In linux it just depends on how the bootloader is configured - not a problem with grub2.
I also propose that incase of Auto-prepare Hard Drive, the installer default to GPT for "archlinux only" installs ( ie no dual-boot or triple-boot etc.).
I did not use the official archlinux iso but used archboot 2010.04 R3 as it gave an option of installing to GPT and also provided GRUB2 during bootloader install. I have never edited any wiki page before, thats why I request some one else to start a wiki page with the information given above.
I don't know whether this is the right place, but any Windows (Vista or 7 x64 versions) and Linux dual-boot user who has UEFI-based system with GPT partitioning and wants to get rid of Hybrid MBR setup (to boot Windows) can follow this post http://www.insanelymac.com/forum/lofive … hp/t186440 (outside this forum) - this link describes the way to make Windows boot natively in UEFI-GPT setup. After doing this one can install arch using GRUB2 compiled for UEFI x86_64, and Windows will also see
Last edited by skodabenz (2011-01-30 19:32:48)

Welcome to arch, skodabenz! Offering documentation on third post - all thumbs up
You could start the wiki page in your user-space with what you have, and then invite others to join working on it. Just register a wiki account, navigate to the page you want to start, for example:
http://wiki.archlinux.org/index.php/User:skodabenz/GPT
and click on "edit this page".
As noted in the other thread, arch's legacy grub is patched for gpt support. I don't know about UEFI, but you can always open a bug report asking for the patches from fedora to be included.
edit: the page from Rod Smith is a great resource. I was absolutely terrified at first by all this screwed up GPT/MBR stuff when I tried triple-booting Arch, Win and OS x, but he really does a great job explaining what it is all about.
Last edited by hokasch (2010-05-21 15:44:08)

Why logical partition is a must for voting disk and OCR

Similar Messages

Maybe you are looking for