Why lower audo levels when connecting to home stereo system

I have connected an audio cable to the earphone output on the Nano.This cable has two RCA connectors that connect to the line-in of my home stereo system. It works fine except for one thing. The volume is lower than other sources that feed into a "line-in" input. To make things even across the system, is there some type of devise that will increase the output level of the headphone jack on the Nano? Or does using an Apple cable make any difference. I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output.
Thanks for suggestions.
Lonnie
Custom made PC Windows XP Pro 1gig ram P4 4.06

"I would think this little problem is just a case of the headphone output being of a lower output level than a "line-out" output."
It is, which is why many people who want to do this use the iPod dock, which has a proper 'line out' socket.

Similar Messages

20G iPOD freezes when connecting to home stereo and other components

When i connect my iPOD to my home stereo through a docking station the iPOD buttons become disfunctional. it only plays one song and then it "shuts down". Not really shuts down because the iPOD is still on and as soon as i remove it from the docking station, it works fine again. Any ideas?

"However, most of the cables I find use the headphone output. "
Yep, thats fine, just get one of those!
MiniJack (3.5mm; small headphone output) - L/R Cinch Audio Jack, as you say.

Connecting my home stereo system to my macbook pro

I want to connect my stereo system to my MacBook Pro in order to put some of my Pops old vinyl onto CD to play when out and about. Please can someone advise best option. Usual stereo phono out from the amp.
Thanks
Nii Naku

Well, there are many options you can use. If you have a home stereo, with only two channels, you can go to radio shack and get a splitter cable, one with the red and black/white RCA connectors on one end, and then the 1/8th inch headphone connector on the other end, and then plug the RCA's into you stereo in the line out ports, and then the headphone into the line in on the MBP, and you are all set. You can even go into system prefs and sound under line in or recording, play the record and see what the MBP is registering for line in volume and adjust it to get the best sound.

HT5517 How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System.

How do I connect my Home Theatre System to Apple TV such that I Can Play the Music on my iPhone through the Home Theatre System?

Thanks for the reply. I tried but failed. There's no sound through the Home Theatre system ( Bose 3.2.1 GS). The audio audio always come through the TV which is connected to the ATV. Please help. Thanks

IMac 10.6.8, Snow Leopard with iTunes 11.0.1. loss of wifi speed when connecting a Bose Sound System via bluetooth

Hello, I have an iMac 10.6.8, Snow Leopard with iTunes 11.0.1. When connecting my Bose Sound System via bluetooth the wifi downloadspeed goes from snappy to a crawl, disconnecting the bluetooth connection, the downloadspeed goes up again. Don't have this problems with the Sound System when connecting it to my iPad. I like to mention too, that the downloadspeed of my iPad is always better than of my iMac. Are there any experiences concerning this problem? Thank you in advance.

UPDATE - PROBLEM SOLVED!!!!!!
You can thank me later - after an hour on the phone, I finally got through to a Senior Engineer.
Apperently the issues lies with GRID VIEW.
Open your Itunes, Click on TV SHOWS, then quickly change your view from GRID VIEW (Defaults to this) to List View and Viola!
We tested it out on the phone just minutes ago, my problem is solved and I suspect if you guys try this yours will be too.

Re: Connection To Home Audio System

I have currently upgraded my phone to the Nokia N80 which i have to admit is so far the best phone i have ever had to date. The problem i am having is trying to figure out how i can connect my phone to my Technics Audio system. It mentions something about the UPnP technology to be able to do this but so far after hours of searching on the internet i still have found nothing on how this can be done. I got all sorts of extra gadgets with my phone like headset, data cable and 2 other things, one of which is a small cable with the coding CA-44 on it and one of which looks like a bluetooth dongle which connects to your phone and has a small black square on the opposite end. Are these anything to do with how i connect to my audio system or can anyone help me with this matter. Thank you.

Hi,
what you can also do that is less complex is get yourself the Nokia Music pack what you need is the Nokia Audio Adapter AD-15: Simply is Pop-Port to phone, 3.5 mm plug to headphones lets you listen to your phone's FM radio or MP3 player through your own standard stereo headphones, compatible car stereo, or audio amplifier
And ... the Nokia Audio Cable CA-72U: 3.5 mm connector to phone and two RCA connectors to home entertainment system connects your compatible phone to a home stereo system for stereo playback or recording.
Then you are good to go....
Check out the Nokia Music pack on http://www.europe.nokia.com/nokia/0,,83227,00.html?s=MusicPack

An error occurred when connecting to the accounting system ID3DEV310

Hi Friends,
We are Implementing collaboration project 4.5 and want to link with project system in ECC 6.0. Both these are in the different servers.
I have done the configuration on both the servers and also maintain the RFC (ID3DEV310) in Object Links.
When I create or open the existing project I get the following error: "An error occurred when connecting to the accounting system ID3DEV310"
Costing Variant taken is PS01 (Project Planning).
Your reply would be highly appreciated.
Aryan

Hi Deepak,
I have assigned the RFC destination and web server to the object type: "0WBSELEMENT" only
Also the same has been done for define Object links for accounting integration "0FIN_INT_ERP_PS"
I have entered these specific to PS objects only.
Aryan

Roland UM-ONE CD-ROM does not mount on iMac OS 10.8.2 Roland driver for 10.8 installed as directed. No power ready light shows when connecting UM-ONE. System Profiler shows it, but not configured. Older UM-1X works fine. UM-ONE works on Dell Windows XP.

UM-ONE
Roland supplied CD-ROM does not mount or read by iMac OS 10.8.2, works with old TiBook and Dell laptop, however.
Got latest driver from RolandUS.com (um_1mx8d_v100), installed as directed.
No power ready light shows when connecting UM-ONE.
System Profile shows it there, but not configured.
With Audio MIDI Setup opened to MIDI Studio window, UM-ONE does not appear.
Tried many things without success. Tried swapping UM-1X (formerly on Dell laptop) with UM-ONE. UM-ONE installed and worked there without any issues. MIDI instrument communicates fine.
The UM-1X works without complaint and as expected when connected to any USB port on either the Dell or iMac, even a hub or keyboard port, just as it formerly had before changing operating systems, etc. It is old, but reliable.
Upshot is, for now, that UM-1X works with either the Dell or the iMac, but is currently attached to the iMac. UM-ONE (2011 model) only works with the Dell (Windows XP).

Same problem here! The only difference is that I'm using a MacBook pro 13 inch (2011)

Wirelessly connecting to a home stereo system

Anyone know if/how it is possible to play audio wirelessly thorugh a home stereo system? I'm looking to do something similar to what the Airport station does but with all audio from the mac not just audio from Itunes.

See this software:
http://www.rogueamoeba.com/airfoil/mac/

Can time capsule allow me to stream music from my itunes library directly to my home stereo system? Is there anyway to access my itunes library from my tv?

can time capsule allow me to stream music from my itunes library directly to my home stereo system? Is there anyway to access my itunes library from my tv?

Sorry, not sure if I understand what you are asking.
Are you thinking of moving your iTunes / Media Folder from your Mac to the Time Capsule?
If you do this...when...not if...the Time Capsule drive has a problem....you lose everything because you have no backup for the iTunes library.
A much safer plan would be to add an external hard drive to your computer and move the iTunes library there.
Then, if you are using Time Machine for backups, it will back up both your Mac and the hard drive. Now you have "originals" on one drive and backups on another.
In order to stream music from the iTunes library, iTunes must always be open on your computer.
Is there anyway to access my itunes library from my tv?
Yes, if your TV has an HDMI input and you have an Apple TV.

Wireless home stereo system

Hi,
I'd like to use a MacMini as a home stereo system using wireless speakers. We have a nice sony system but no where to set it up in our new home and I'd rather get rid of all the wire and keep it out of sight. What's needed to do this? It is possible, yes? Thanks for any ideas. I saw the post on airexpress but that doesn't really address my needs.

The Apple Airport Express and a stereo connection cable are exactly what you need to do this. You also need powered speakers, or speakers that get their power through an AV Receiver and amp.
The Airport Express is a wireless broadband router that can be directly connected to the Mac mini (wired or wirelessly) and used to distribute your Internet connection to other networked computers in the house.
Significantly, the Airport Express also has a single audio jack that allows you to connect either an analog (RCA-style) audio cable or a digital optical SPDIF cable -- either can be connected to the back of your AV Receiver, but you'll get the best quality using the digital cable (assuming your AV Receiver has a free optical digital port). Once the AEX is connected, you assign one of the receiver's Input ports to the computer/AEX. So, instead of connecting a stereo CD or tape player to the receiver, you connect the computer.
The stereo connection kit (cables) must be purchased separately.
We connected the AEX to our computer network using a Category 6 (RJ-45) Ethernet cable. While you can set up the Express to receive network signals wirelessly, it will be more reliable, and possiby faster (depending on the topology and setup), if you rely on Ethernet where possible. This way, the cable or DSL modem is hard-wired to the AEX and the only portion of the network that is wireless is between the wireless computers and the AEX.

Need help planning home stereo system utilizing Itunes,iPs, airplay

Hello,
the internet is overwhelming me with Info, so I will ask you guys my question.
How to best build a home stereo system playing my itunes libraries.
Here are my stats:
Itunes library is housed in external 1 TB drive, worked off a Windows laptop ( Sony Viao)
I have and use two Itunes accounts ( one for US and one for Germany store)
Have an older Ipod click ( older gen, ), I phone 4S and Ipad 2,
will be upgrading to new iphone and ipad this year.
What I want to do:
At the moment we have no home stereo system or home theater. Been happy using the HDMI connector playing video from Ipad to TV. To be honest I do most of my TV viewing directly from the Ipad as it's very transportable.
Music I listen more with headphones, but have been missing my old hi-fi system from 10 years ago, which I no longer have. ( Birthing and raising 2 kids the past 8 years made me forget what I have missed . ).
Anyways it's time to get serious again.
I need to first start with a basic receiver and speakers.
Question 1:
What kind of a receiver do you recommend? There are so many options now besides hooking DVD/CD player to Receiver/tuner. Now you have wifi options ( airplay etc...). where I understand you can stream your itunes movie/music wifi. We would want a traditional DVD/CD hook up and itunes.
Question 2:
Digitial Quality: Does streaming via airplay to a receiver give digitial quality in music? I read that most Iphone/pod docks only offer analog hookup. What about digital. I know there are a few ie. Onkyo ND-S1 that are digitial. Does airplay give the same quality over wifi as a hook-up??
Question 3: I am willing to have most of my library on a ipod/ipad , but what would be the best way to access my itunes library via the exterrnal drive WITHOUT having to run a computer?? also do Airplay and appletv work together, same thing? or need both?
Question 4: Our house is big and not open. this means investing in a single set- up in main area downstairs. But what are some cheaper options ( Sonos too much money for us) for a system more spread out. Can I run from one receiver one set of speakers with wire hook-up in main room and wireless elsewhere . and how does the wireless work ( wifi?)
I hope I made sense, kinds still brainstorming in my head.

Hi,
I see no one has taken up the challenge so I'll give it a go
Here's the Apple info for multiple iPods:
How to use multiple iPods with one computer
It has a link to an article on how to share music between different accounts on the same computer which you should read.
1. When you say 'Archive entire CD collection...' I assume you are talking about loading all your CDs into one or more iTunes libraries?
2. Assuming one or more iTunes libraries then all you need to do is set the import options correctly. iTunes>Preferences>Advanced>Importing>Import using Apple Lossless Encoder
3. This would seem to indicate you need one iTunes library. It is the computer that is authorised: iTunes: About Music Store authorization and deauthorization
4. For each user to have unique song ratings you will need multiple iTunes libraries.
If Lossless and AAC are in the same Library then Smart Playlists will do the trick as you can have the condition 'Kind does not contain Apple Lossless'
You can set the view options to show you what Kind of track in iTunes.
Hope this gets you going on the right tracks.
Regards,
Colin R.

Why won't my Apple TV recognize my Apple ID when connecting to Home Sharing?

I'm out of town using my Apple TV in my RV connected to WiFi at a campground and I'm trying to connect to Home Sharing because that seems to be the only available option to me when I turn on the Apple TV.
Whenever I try to connect my Apple ID info, it gets denied with the "Error" page saying that my Apple ID info is incorrect. However, I have re-entered and rechecked the info multiple times and even tried using a different family member's ID info.
What am I doing wrong here? I just want to watch Netflix via Apple TV!

Re: Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing
You may need to configure some ports on your router for port forwarding. Before you do, you may want to try setting the Apple TV date and time to manual but have the time zone be the same as your computer that is running iTunes.
The link is to a more aggressive approach that will solve your connectivity problem. Your equipment may not be the same but the configuration changes is what you are looking for here.

Volume level on line-in at 100% but still low sound level when I rec

For many years and hundreds of times I have successfully recorded wave files using a wave editor (Goldwave). I have transferred albums, tapes, and now satellite radio by running stereo cables from my receiver into my line-in on my sound card (using a stereo-to-mono adapter). The volume level on the line-in was always too loud on my old sound card, so I always turned the volume of the line-in down to about 20% and it worked just fine.
Two weeks ago my old sound card fried (don't know the brand - got it from a friend, and I've already thrown it out). I replaced it with a Sound Blaster Li've! 24-Bit. However, using the same configuration (receiver into line-in on card), when I record now the volume level that it records at is way too low. Even when I set the line-in level at 00% the volume that it records at is not even half the level it was with my old sound card set at 20%. Basically, when I record now at 00% on the line-in, the volume level it records at is too low. I have no problem with the line-out level - when I play mp3's or anything else on my hard dri've the volume is crisp, clear, and plenty loud at 40%.
But what is the deal with the low volume recording level? Is there another setting I need to change? Or do I not have the right sound card to do this with? Please let me know if it is a setting issue, or if I just need a different sound card to do this. Thanks.

I've had an Audigy2-nx for a week and have struggled with low
recording levels as well.
Have you tried selecting "what you hear" instead of "Line-In"?
This gives me about 20% higher input levels.
I gave up on MedeaSource for variable bitrate recordings and
moved to dbPowerAmp. (direct recording to lame-mp3)
Others here mention good VBR recordings with MedeaSource, but
it won't exceed 90kbs (average) on my system.
I'm finally getting decent recordings from line-in.

IPhone GPS location incorrect when connected to home wireless network

Hi all,
My iPhone GPS works well except when I am at home and connect to my wireless network. It always gives the same incorrect location about 3km away from my house. When I turn wireless off then the phone gives my correct location.
I think it is somehow getting confused when connecting to my airport. (I wonder if it is showing the location of the local telephone exchange?)
Has anyone else encountered this problem or found a solution? Or can I somehow tell my airport where it is?
Thanks!

A company called Skyhook Wireless maps WiFi and cell tower locations it scans. Apple uses this to help your GPS locate itself quicker. Here's how it works: http://www.skyhookwireless.com/inaction/apple.php
If your WiFi has not been scanned properly, you can submit a WiFi location update by going here: http://www.skyhookwireless.com/howitworks/submit_ap.php

Why lower audo levels when connecting to home stereo system

Similar Messages

Maybe you are looking for