Why Mail does not work properly after updated to Mountain Lion?

I updated to ML two days ago and my Mail is not working. I can read but cannot reply because there is no cursor. Restarted a few times, no change. Anybody has the same problem??
Rudh

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

Similar Messages

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

Finder does not run properly after starting up [Mountain Lion]

I've installed MountainLion from Snow Leopard 10.6.8
My Mac is Macbook7,1 (Macbook White) Intel Core 2 Duo
When the installation finish, it seems like Finder does not run. I have to click on the Finder icon on the Dock to make it run.
And then I got some of problem after that
1. When I Click "About This Mac", nothings happen.
2. When I Click "Restart...", "Shutdown..." or "Sleep", nothings happen. So, I have to Shutdown or Restart my Macbook from "Login Window..." only.
3. Some of my settings in "System Preferences" do not be saved. Such as Trackpad settings (I can't "Tap to Click" in every time I start up my Macbook, I have to use physical click instead.) and Spotlight Hotkey settings (When I switch the Language, the Spotlight is popping up.)
I'm not sure what is the cause of these problem.
Could anyone help me please.
Thank You.

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

Mail does not retreive messages after upgrading to Mountain Lion

I just upgraded my work iMac (2009) to Mountain Lion last night and now it will not retreive any messages from my work email account (POP). It was working fine yesterday (and for the past 3+ years) while I was still on Lion, but despite searching for answers and trying multiple solutions for several hours, I still cannot get it to work. Among other things, I have deleted and then added the account back (multiple times); restarted the Mac (multiple times); and zapped the PRAM, but nothing has fixed it yet.
When I select "Get Mail" from that mailbox and watch the Activity Monitor, it connects to the server, says "Fetching new mail", then "Preparing to retreive new mail", but it then just disappears after about about a minute and makes the "no mail" beep. There are no error messages, but I can see in the bottom "Mail Activity" window that it says it's downloading 40+ messages but nothing shows up. The mail account still works on my iPhone and I can check the mail on my webmail server, so I don't think it has anything to do with the server especially since it worked fine yesterday.
Any insight would be much appreciated because it's driving me crazy!!

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

My Iphoto does not work properly, after downloading Mavericks. How can I fix it ? loading Mavericks

My Iphoto does not work properly after downloading Maverick. How can I fix it ?

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
Not sure whats going on.
Worked fine using iOS4.3.5.
Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Ipad2, safari does not work properly after ios6 update. How do I fix it?

I need help in fixing safari problems after ios6

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what do you mean by not working properly? Explain in detail.
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT

Script does not work anymore after updating to FM 12.0.3

Hi,
With TCS5, Robohelp would crash when importing FrameMaker books to RH, because the FM files had embedded graphics. So, I found a script to externalize the graphics before doing the import (the script is: ExtendScript of the week: Externalizing Graphics « TechComm Central by Adobe). However, this script is not working since I updated from 12.0.2 to 12.0.3. And without this script, we can't create HTML5 output!
Although I wrote a few simple scripts, this one is quite complex and would be difficult to debug. Anyone here knows what could have changed to make the script useless after such a small update? Or can update this script to make it work?
Thanks!

Hi again,
For those who would like to know... I made this script work with 12.0.3. I simply removed the instructions that added an item in the File menu and stuff about a report, which I don't think ever worked. So, I still don't know exactly why it didn't work anymore (don't have time or knowledge to investigate), but I'm still interested to know.

Applications not working properly after updating t...

After eventually updating to symbian Anna, I've noticed that some applications are not working properly, notably AccuWeather and Facebook. Uninstalled AccuWeather and re-installed it but still didn't work . Seems pointless releasing a software update and then to discover that applications from Ovi store won't work on your device! With Facebook I can only login in to my account but when I go to view a friend etc, it shuts down.
Has anyone any suggestions or solutions to the problem?
Thanks

i updated to the latest version 025.007 on my E7 too and a lot of the apps on the store dont work. Just blank screens.
Somebody do something!!
I use other devices, and havent faced this problem with any of them after an upgrade!

Camera led is not working properly after update

After updating to IOS 6.0.1 led is not working properly.
When filming , the led is burning very weak, and when lightsetting is turned to
automatic not at all.

Reset your phone first, hold the home and off button down until the apple symbol comes up. If that doesnt do it, then do a restore from your backup in itunes.

My wacom tablet does not work correctly after updating to mavericks.

My wacom doesn't work.

Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

Remote does not work correctly after update

Hello,
the subject explain it already:
After upgrading to 2.3 the apple remote does not work correctly anymore:
I need to push the buttons twice, and than atv is only reacting sometimes.
Any ideas?
BR
Frank

Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

Automator not working properly after updating to OS 10.10.2

I just updated to 10.10.2 and Automator in Safari is not working properly. I set up 10 URLs to open but only the first 4 open. The rest give a message "You can't open Safari because it is not responding". Any help would be appreciated.
Thank you
Using an iMac 21.5, late 2013

Happen to me too. Looks like a Bug. Installed 10.9.2 and it turned on Safari in the iCloud Sytem Preferences.
Thank god I had a backup. And then my wife logged into the same computer and it messed them up again.
I wish I knew where the iCloud bookmark file was. I've tried goggling it, ut no luck.
So If at one point in time if you turn it on it uploads the bookmark file somewere in the cloud, then you turn it off then change your bookmarks to something differnet it's OK. Just don't turn it on again.
Hopefully the bug was on the software update!

My Mail is not working properly after installing Lion

I just installed Lion and my mail is not working. It keeps asking me for the password and says it can not go online. All my mail folders have disapeard and with them my saved emails! Also the Back to Mac is not able to take my password either.

Ouch...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Mail does not work properly with gmail

Hi everyone. I am a very recent switcher and the switching process was great and extremely easy, but there has only been one problem that I can't seem to solve. Getting Gmail to work with Apple Mail. I followed all the steps on gmail's website on, how to set up gmail for POP, and how to configure Apple Mail to work with gmail, but I still can't get it to download all my emails. It only downloads some old emails, marks them all as unread, and then doesn't act like I have any other emails(which I do). Under system preferences, I have the account type labeled as POP, the incoming mail server set to pop.gmail.com, my username and password set, and the smtp box set to smtp.gmail.com. Under server settings I have the server port at 587, the ssl box checked and the outgoing mail server as stmp.gmail, like I said before. Under the advanced tab of the accounts section of apple mail preferences, I have the account enable box checked, the include when automatically checking for new mail box checked, and down at the bottom, I have the port set at 995 with the ssl box checked. In gmail, under my forwarding and POP settings, I have it set, under the POP download section to: Enable POP for all mail(even mail that's already been downloaded). Also, the status is set to "POP is enabled for all mail that has arrived since 10/13/05(which was when i first got my gmail account). Like I said before, Apple Mail at first starting downloading all the mail in my gmail account and then stopped after about 1000 to 2000 messages which only got it to about mid-2006 or earlier. Yes, I've run software update recently, too. Does anyone know why it would not dowload the rest of my mail? All help is very greaty appreciated. Thanks.

I just put my gmail account in Apple Mail and it works fine - even transferring my old gmail messages. Maybe your problem is STORAGE - see this from Mail Help:
About .Mac Mail
.Mac Mail works with existing email clients like Mac OS X Mail, Outlook Express, and Netscape Communicator.
You can also check email when you're away from your own computer. All you need is a computer with an Internet connection and a supported web browser to check your .Mac Mail. To access .Mac Mail on the web using Mac OS X version 10.3 or later, use Safari 1.2 or later or Firefox 1.0.1 or later. If you're using Microsoft Windows XP, use Firefox 1.0.1 or later or Internet Explorer 6 or later.
Use POP or IMAP protocol to suit your working style and set up automatic email forwarding or replies.
Your email address is your .Mac member name followed by @mac.com, and the password for accessing email is the same as your member password.
Note: AOL recently added support for IMAP, so you can now read your AOL mail using Mac OS X Mail. You cannot use AOL's email program to read .Mac Mail messages directly, but you can set up your .Mac Mail account to forward email to your AOL account.
.Mac comes with 1 gigabyte (GB) of combined email and iDisk storage. .Mac trial members and email-only accounts get 50 megabytes (MB) of storage; Family Pack sub-accounts get 256 MB. You can designate storage space to your .Mac Mail account and your iDisk. For example, if you need more storage space for your email messages, you can set your .Mac Mail storage capacity to 800 MB and reserve 224 MB of storage for your iDisk. You can also increase your combined email and iDisk storage to a total of 2 GB or 4 GB by purchasing more storage. (If you have a trial account, email-only account, or Family Pack sub-account, you cannot increase your storage amount.)
Your .Mac Mail storage is automatically set to 512 MB unless you change it. You can't assign less than 15 MB of storage to your .Mac Mail account.
.Mac comes with 10 GB of data transfer per month and a 10 MB maximum message size. You can increase your monthly data transfer limit up to 250 GB per month by adding more storage space to your .Mac account. You can also purchase up to 10 additional email accounts. (Email-only accounts get 50 MB of storage space but no additional .Mac services, and Family Pack sub-accounts get 256 MB of storage space, but cannot purchase additional email accounts.)
If I had 2000 emails on my computer I would shut it down and never turn it on again.

Why Mail does not work properly after updated to Mountain Lion?

Similar Messages

Maybe you are looking for