Why map sensors unable to detect sensor under Measurement category in SolidWorks (SWs)

In Labview Project Explorer, when I want to add 'map sensors' to the Solidworks model, it only detect the sensor under the 'Dimension' type shown on the FeatureManager Design Tree' on the left side.
While sensor under type 'Measurement' cannot be detect. Can anybody kindly explain why Labview cannot detect sensor under 'Measurement' type? Thanks in advance.

I've been trying to map sensors the Measurement sensor. But it could not detect Measurement sensor. It can only detect Dimension sensor.
I can't use the Dimension sensor because it requires measurement on a plarnar surface, while my model is curved. So I need to use Measurement sensor, point to point measurement to detect the length between the two components.
It mention in Labview 2014 softmotion help that both Dimension and Measurement sensor are applicable in NI Softmotion.
But why it only detect Dimension? Do I need to insert any extra command for labview to detect Measurement sensor?

Similar Messages

Why are you unable to create folders under a playlist?

I'd like the ability to have playlists within a playlist. For example. I like to workout and create specific playlists for different workouts. So right now I have to create them one by one and have them listed all in my playlist folder. But what I'd like to do is have the main "Workout" Playlist and have different smaller playlists underneath, just like how the artist/album folders are layed out. Is this possible and if not, where do I post to suggest it?
Thanks.

No, it's not possible.
iPod Feedback.

Why itune unable to detect my 1st ipod

Hello,
I am using most update Itune under 64 bit Windows 7 , Why the iTune unable to detect my 1st iPOD ? The same system is working with my iPhone 4 ..

- Have you tried resetting your iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Did you do anything to the iPod since iTunes last saw the iPod?
- Presume you used the same USB port and cable that works with the iPhone

Unable to see "Sensors"(BAM) in BPEL Structure Pane

Hello-
I've created a simple BPEL process and would like to monitor the time consumed by each activity in the BPEL process. Hence I tried to create sensors (variables). But I'm unable to see "Sensors" in the structure pane to create variables? Where do I see these sensors? Do I need Jdev plugins for BAM?
Would you provide steps to monitor the time consumed for each BPEL acitivity in BAM?
Thanks

Hello,
guess you are using Jdeveloper 11.1.1.3...
Click 'Monitor' button in the panel above the bpel diagram to change to monitor view, then you should see sensors in the structure window.
No extra plugins required for creating sensors.
regards, Matti

TS1538 Why is my iPhone device grayed out under "devices?" I am unable to get it to sync, etc.

Why is my iPhone device grayed out under "devices?" I am unable to get it to sync, etc.

This might answer you're question https://discussions.apple.com/message/25541394#25541394

Unable to create "Sensors"(BAM) in BPEL Structure Pane

Hello-
I've created a simple BPEL process and would like to monitor the time consumed by each activity in the BPEL process. Hence I tried to create sensors (variables). But I'm unable to see "Sensors" in the structure pane to create variables? Where do I create these sensors? Do I need Jdev plugins for BAM?
Would you provide steps to monitor the time consumed for each BPEL acitivity in BAM?
Thanks
Babu

Hello,
guess you are using Jdeveloper 11.1.1.3...
Click 'Monitor' button in the panel above the bpel diagram to change to monitor view, then you should see sensors in the structure window.
No extra plugins required for creating sensors.
regards, Matti

ERROR: Unable to detect fingerprint device

Pavilion dm4 laptop worked fine yesterday. Booted up this morning and the option to sign in with a finger swipe was missing.
PC has ""HP SimplePass Identity Protection" with a "Validity Sensors, Inc" fingerprint scanning device.
Clicking SimplePass icon and then clicking Control Center gives error message: "Unable to detect fingerprint device".
Device Manager for Biometric Devices says that Validity Sensor is "working properly".
Trying to update device driver indicates that the latest driver is already installed.
Tried a "Hard Reset" to see if static electricity buildup was the culprit, but nothing seemed to change.
Ran "Troubleshooter" to detect new hardware or changed hardware, but nothing was detected.
Made sure BIOS was set to Default Configuration.
No programs were installed yesterday, no updates from Windows or HP.
Stumped as what to try next. Any suggestions would be greatly appreciated.
Thanks,
Marty
dm4t i5-430M 4GB-RAM IntelGraphics

Hi Bryan,
Thanks for the suggestion, but I’ve already uninstalled and reinstalled the Validity Sensor drivers and the SimplePass software (in both Normal and Safe modes). SimplePass is still unable to detect the Validity Sensor.
I can open and run SimplePass and make a few changes to some general settings, and it seems to work fine. Also, Device Manager is still saying that Validity Sensor is “running properly”.
Had a detailed telephone conversation with Tech Support to make sure that I wasn’t overlooking anything. We ran through a checklist, but the problem is still there. Tech Support and I think that the problem is a hardware failure of the sensor. Unfortunately, I was informed that I had to do a “lobotomy”, a full System Recovery, before they could authorize returning the PC. Right now the PC works absolutely fine except for the Validity Sensor, and I really can’t be without my PC for a week or longer. So … Tech Support has me scheduled for a callback in January. Will do the recovery then. 99% sure that the recovery will not fix the problem, but now is definitely the wrong time of the year to be without my dm4t.
In fact, even thought the PC is only 4 months old and under warranty, I’d prefer it if HP could mail me a new sensor, and I’d install it myself, but don’t think HP would approve this option.
Regards,
Marty
dm4t i5-430M 4GB-RAM IntelGraphics

Unable to Detect SDHC Card on Windows 7

Hi guys, recently I received a 4 gb sdhc card but when insert the card into the card reader & plug to the usb port, win 7 was unable to detect it. 1st thought was this sdhc card is bad but i when plug it to another win 7 pc it detects
straight away, so the card is not faulty. I tried uninstalling the usb driver & HID driver still can't detect. Notice that under the disk drives it does show 'Mass Storage Device USB Device' which means it actually did detect but won't show up
in 'My Computer' ..... Why? Hope someone can help to resolve this issue. Thanks

Here is the answer from Scandisk
STEP 1 - Backup the registry
1. Unplug the device from the USB port.
2. Run regedit.
Windows XP: Go to Start > Run, type in regedit and then click OK.
Windows 7, 8 and Vista: Click the Start button, type regedit in the search box, and then press Enter.
3. From the registry menu, choose File > Export.
4. Name the file SNDK.reg and save it to your desktop.
STEP 2 - Remove SanDisk info from the registry
WARNING: DO NOT delete any registry key other than keys that include VID_0781. Deleting registry keys other than keys that include VID_0781 MAY cause your computer to not boot properly.
1. From the registry menu, click Edit and choose Find.
2. Type in VID_0781 and click Find Next.
3. Once the search finishes, right-click the highlighted registry key and select delete.
4. Press the F3 key to find the next registry key that includes VID_0781.
5. Right-click the highlighted registry key and select delete.
6. Repeat this process until the search returns with No results Found.
NOTE: Under Windows 7, 8 and Vista, some registry keys may be protected and cannot be deleted. Simply skip over these keys if you receive a message that the key cannot be deleted.
7. Once all registry keys containing VID_0781 have been deleted, reboot your computer.
8. Plug the device into the computer after it's finished rebooting.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

Unable to detect router WRT54G

Set up disk tells me it is unable to finish installation. ELA tells me it is unable to detect router. I just exchanged my WRT54G router for a new one because I was unable to access the router's web page. I was told by a computer guy that my router must be dead, so I exchanged it (it was only 4 months old). I also had a very lengthy online chat session to try to fix the problem.
My internet connections are working, though and ELA tells me my network is 'ok' and my wireless network is 'secured.' But under 'Network Settings' it does not recognize the router and I am unable to access and configure my router through the browser.
Below, I've tried to copy and paste the router web page -- it only shows a few details, no words at the tops of the tabs, so I am unable to configure.
Also, I have downloaded new firmware (this router is v.8) with the tftp tool -- it says it is successful. PLEASE HELP! I've spent too much time on this . . .
PING:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Stephanie Brown>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Reply from 192.168.1.1: bytes=32 time1ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Documents and Settings\Stephanie Brown>
ROUTER WEB PAGE:
: v8.00.0
WRT54G
|
|
|
Automatic Configuration - DHCPStatic IPPPPoEPPTPL2TPTelstra Cable
: AutoManual
: 255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252
: 192.168.1.
Static DNS 1: . . .
Static DNS 2: . . .
Static DNS 3: . . .
Automatic Configuration - DHCP: This setting is most commonly used by Cable operators.
Maximum number of DHCP Users: You may limit the number of addresses your router hands out.
More...

My suggestion is you start over from scratch. Redownload the firmware with a wired connection....After you install the firmware. Hit the reset button for thirty seconds and let it reconfigure. Powercycle the modem and router. By this I mean turn everything off. Turn on the modem...wait till it has booted up. Then turn on the router..wait till it has booted up and turn on the pc. Dont use the install cd or easy link. Once you have booted everything up. See if your computer will detect the router wirelessly. The ssid is usually "linksys". Make sure you can make a connection. Once you make a connection and can access the internet ....then you can connect to the router wired...and enter the web browser. See if you can get to this point first before we proceed.
Linksys WRT54G v3.1 (DD-WRT v23 SP2 09/15/06 std) Linksys WRT54G v2 (Firmware Version: v2.04.4)

Macbook 2008 unable to detect the 4 gen iPod or iPad

The macbook 2008 model is unable to detect iPod or iPad of 4th Generation.
I am unable to upgrade the OS software and unable to install any new software. (.dmg)
Help me.

What OS on the computer?
What version of iTunes?
Why are you unable to upgrade your OS.

Xtreme music sb0460 model, is this oem ? Can't find driver "Setup is unable to detect a supported.."

Hello, I have bought creative xtreme music sb0460 model, and its probably oem product. My msi 880 gma motherboard recognise device in windows 7 32 bit as pci device, tries to find update. But nothing. Actually I did many things, I've disabled my onboard sound device, tired manually to install. Tried many new updates from 2008 for this model from creative database, but nothing I just only get message "Setup is unable to detect a supported product in your system" when try launch a setup. I don't know why is that. I will give some numbers and maybe you will help me. Serial number MASB0467641R08326T; Tested to comply with fcc standrats for home or office use complies with Canadian ICES-003 class b
Thank you for advices !

Download the newest drivers for the card and extract them using WinZip, 7-zip, or WinRAR. Then you can manually browse to the driver folder with the .inf file inside and install the driver that way. Done it many times myself and it works well.
Originally Posted by Erna
Hello, I have bought creative xtreme music sb0460 model, and its probably oem product. My msi 880 gma motherboard recognise device in windows 7 32 bit as pci device, tries to find update. But nothing. Actually I did many things, I've disabled my onboard sound device, tired manually to install. Tried many new updates from 2008 for this model from creative database, but nothing I just only get message "Setup is unable to detect a supported product in your system" when try launch a setup. I don't know why is that. I will give some numbers and maybe you will help me. Serial number MASB0467641R08326T; Tested to comply with fcc standrats for home or office use complies with Canadian ICES-003 class b
Thank you for advices !

"Setup was unable to detect a usable Java 2 Runtime Environment"

HI,
I have installed JDK 1.3.1 on my W2K professional machine. It runs fine. During the installation of Java Web start, the setup dialog box shows "setup was unable to detect a usable Java 2 Runtime Environment" and ask me to install JRE 1.3.0_02. From control panel, I can see JRE 1.3.1 is installed. Does anyone know why this setup program can not detect my existing JRE 1.3.1 from Sun? Please advise.
Thanks.
-Fred
[email protected]

BTW, same thing happened here.... 1.3.1 FCS installed on WinNT prior to installing JWS 1.0.1 and Web Start failed to detect the JRE. I just cancelled the 1.3.0_02 install & Web Start apps worked fine with the 1.3.1 installed...
Somewhere in Web Start's config is a pointer/field to the JRE it uses...
Good luck,
Chris

Zen 20gb - Setup is unable to detect a supported device

Trying to install my Zen 20gb (bigger version of the micro!) onto my work-laptop;
Unfotunately I cannot find the original installation disk, but I have downloaded the latest software from the Creative website. When I try to install CMS_PCAPP_LB_3_30_2.exe, I get a message "Setup is unable to detect a supported device...". Immediately before this, the Zen shows Docked, but then reverts back to the Play screen.
I have searched this forum and tried as many different soultions as I can find, all to no avail. I have installed NomadSync and that connects without problem... but why won't the "official" software?

Yep... already tried that. I've even used the Software AutoUpdate that says I need the:
Creative MediaSource Player/Organizer 3.30.2
Creative MediaSource Plugin for CD Burner 3.0.8
Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource
... so that is detecting the Zen, but when I try to install Media Source Player/Organizer, it can't detect it!

Usb port1 unable to detect, but port2 able to detect

Hi Apple,
my mac book pro have 2 physical USB ports. but one of them unable to detect any usb device.
My mac book still under warranty.
Pls advice.
Thanks

If you're still under warranty, take your machine to your local Apple Store or an AASP and have them check out and repair the port problem. Likely nothing you can do on your own.
Clinton

Why map sensors unable to detect sensor under Measuremen​t category in SolidWorks (SWs)

Similar Messages

Maybe you are looking for

Why map sensors unable to detect sensor under Measurement category in SolidWorks (SWs)