Why Material Classification Changes are not shown in MM04?

I have a material; I changed classification data by changing a value of a
Characteristic, e.g. unit of measure for reporting. It had allowed values of
No entry, mg, kg.. I changed it from No entry to mg.
However when I went to MM04; I do not see the change; why. I know
When I make changes to non Classification data; I can see changes in mm04.

Hi,
I'm afraid you can't see these changes in MM04.
MM04 does not show the changes of classification of the material master only the changes of fields which directly belong to material master. You can get the classification change docs in the classification screen: menu Environment -> change docs.
Also note that Changes to the values of characteristics are not recorded in material master changes. These values are stored in the classification tables and if you want to track changes of them, you have to use engineering change management.
Thanx & Regards,
Mauro
Edited by: Mauro Bianchi on Aug 24, 2010 11:42 AM

Similar Messages

Material delta changes are not flowing into CRM

Dear All,
material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
Do I need to create the new product hierarchy also in CRM manually?
Appreciate any inputs
Raj

Hi Raj,
Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
Then go to SMW01 and reprosess the struck Bdoc.
Reward points if helps,
Regards,
Paul Kondaveeti

Why the distant objects are not shown ?

Hi , everyone .
The distant objects are not shown unless moving the view closer to them in Java3D .
How to change or set to show the distant objects without moving the view ?
Anyone on any information or advice would be helpful.
3QS !!!
PS: using the defualt virtual universe : SimpleUniverse

When you are creating the View Object do something like this:
// Set up the Front Clipping Distance - in Virtual Eye Coordinates
myView.setFrontClipPolicy( View.VIRTUAL_EYE );
myView.setFrontClipDistance( FRONT_CLIP_DISTANCE );
// Set up the Back Clipping Distance - In Virtual Eye Coordinates
myView.setBackClipPolicy( View.VIRTUAL_EYE );
myView.setBackClipDistance( BACK_CLIP_DISTANCE );
The VIRTUAL_EYE can be replaced by PHYSICAL_EYE and a few others(check javadocs for View for more info)
and the FRONT_CLIP_DISTANCE and BACK_CLIP_DISTANCE are just :
public static final double FRONT_CLIP_DISTANCE = 0.1; // 0.1 Virtual Meters
public static final double BACK_CLIP_DISTANCE = 100; // 100 Virtual Meters
so to get your objects in the distance to render at a greater distance from them, then just increase the BACK_CLIP_DISTANCE to 1000 or something like that
NOTE: the larger the BACK_CLIP_DISTANCE, the longer and slower it will take to render you scene each frame. YOU WILL PAY FOR THIS (in CPU time)
Hope this helps
-- Rob

SAP Script for PO works in test mode but changes are not shown on PO

Hi,
I've modified the sapscript for the Purchase order.When I go to se71 and print test it the chage is visible.But when I actually see the attachment in mail chages are not visible.
Thanks
Venkat

Hi Venkat,
Plz activate the debugger & check if the window where you have made ur changes (text element & texts) is getting executed or not. Debugging will help you to know whether or not the change is triggered.. & Also as to know why its not triggered.. (may be there are some codes above thats working differently when you display the PO at runtime.
To debug the script.. on the tcode SE71 ---> Utilities --> Activate Debugger
Let me know if you have questions.
Thanks
Geetha

After saving and publishing to folder, changes are not shown...

I have successfully published 2 updated versions of my website to the same folder on my computer. I have just completed the third update, saved it, published it, yet after uploading the changes aren't shown on the site itself. I have closed/re-opened iWeb and the changes are shown. Any help would be appreciated!

It is really easy with an ftp app to wind up uploading the old copy of your site instead of the new one. Try publishing to your desktop or someplace else completely different so you will know that you are ftp'ing the newest version.

Material Master changes are not allowing (MM02)

Dear All,
we have done year end activities successfully for the 2010 fiscal year. we are following January to December. In 2011 January 9th date we have activated Material ledger. after that when we try to go to material master the system is giving this error.
"Currency was not defined at production startup
Message no. C+040
Diagnosis
You have set the material ledger to productive in valuatione area DEL1. Nevertheless, information about the currency settings at the time of production startup are missing.
System Response
The system cannot ensure data consistency, since it is not possible to compare the current currency settings with those made at production startup.
Procedure
1. Make sure that the currency settings have not been changed since material ledger production startup in valuation area DEL1.
2. Inform your system administrator."
Even when I try to create the new material master it is showing the same error.
Could anybody guide me how to solve this.
Thanks and regards,
Mr.Rao

Hi Mr Rao ,
Your ML currency settings are incorrect .. which is causing the issue..
A . Have you checked the following notes which give a detailed information about Material Ledger activation: 596558 Material ledger production startup 384145 Advice note on material ledger production startup 165844 Material ledger production startup Please, check attached note 596558, which provides recommendations on Material Ledger production startup: ...before ML activation .. i hope not ..
B Always activate the material ledger for a complete company code and copy all currencies from FI. This is the only way to ensure the reconciliation with FI. c) In addition, it is recommended that you activate the material ledger for a complete company code because the invoice verification can neither store invoices that contain materials from plants the material ledgers of which are active nor more materials from plants the material ledger of which is not active. ... Please, consider that only transactions performed after the startup will be taken into account for the actual price calculation.
C .Now to correct it .. you have to deactive ML and correct the currencies and then re-activate ML . Have a look into SAP : Note 53947 - Changing currencies after production startup. Now , are e the actual activities now posted and production is active .. if yes .. the deactivating ML is a pain.
D .If the Material ledger is already set to u201CProductiveu201D, run the report SAPRCKMJX using SE38. This report should only be run in Development or Testing environment. It is not recommended to be used in Production. It may be used in case there is no activity in the plant (no stock, no movements have happened ever). SAP recommends use of their CO-PC development support for this (OSS Note 108374).
Please revert back for any further clarifications
Regards
Sarada

Why photos are not shown in pdf

in some pdf's the pictures and photos are not shown, do you know why

Refer this article
The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Why changes are not visible in alternate profit center heirarchy?

Hi
I did changes in the master data of profit center. I chaged the profit center group in the masterdata of profit center & the same change is visible in the standard heirachy but the changes are not visible in the alternative heirarchy.
I think it should visible as I did changes in the master data.
I just want to know why it is like so or there is some other way to change the master data.
I know i can drag the profit center as well in t code KCH9 or KCH 2.
After doing so i activated the same.
Waiting for sugestions, comments.
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 1:47 PM
Edited by: Smruti Mohanty on Nov 13, 2008 2:03 PM
Edited by: Smruti Mohanty on Nov 13, 2008 3:02 PM

Hi,
If your are using same profit center group(which is used in standard hierarchy) in alternate hierarchy,you will see change.
if your using different groups in Standard hierarchy and Alternate hierarchy you will not see change in alternate hierarchy.
hope this helps you.
Thanks,
Rau

Why Arabic charactes in PDF are not shown ?

I have Microsoft IIS , oracle report server , Acrobat writer 5 and report builder 6
in Windows2000 with Arabic language enabled.
In live previewer and HTML format Arabic characters are shown correctly in my report
also when i print my report by Acrobat distiller printer, but when i generate to file PDF ,
arabic characters are not shown correctly (they are not shown as question marks )
this meanes that my reports in IE5 as PDF do not show arabic characters.
How Can I define my Acrobat distiller printer as default printer used by web CGI (rwcgi60) ?
I have found this statment in developer documents:
"PDF does not support multi-byte character sets."
wether it meanes that i can not have reports with arabic characters as PDF?
thanks for your help.

Jalal,
BiDi was not supported in PDF output in reports 6/6i. It is supported in reports 9i.
Thanks
The Oracle Reports team

When I select a page to bookmark all my bookmark folders are not shown so that I can enter the page in that bookmark folder.

I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?

The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?

German umlauts are not shown correctly, when a received e-mail is opened the first time. What can I do?

When I open a received e-mail the first time, German umlauts (ä, ö, ü) are not shown correctly. Instead of them there are characters like §,$. When I close the e-mails and open them again the German umlauts are shown correctly. I don't know how to solve that problem. Who can help me?

''Zenos [[#answer-670786|said]]''
<blockquote>
Fascinating. Sounds like an inconsistency between the encoding being used and the encoding being declared. I can't think why it should change when you re-open the message, unless Thunderbird is adding a correct encoding declaration.
(Most users complain about it working in the opposite direction; messages stored as drafts often restore with damaged "special" characters such as smart quotes, accented characters and umlauts.)
</blockquote>

PDFs are not shown correctly at more than 150% size

Hi,
we use Adobe Reader 8.1.2 and we can´t change it in our company.
we now have the problems, that a few documents are not shown correctly, when they are shown with more than 150% on the screen.
at 150% the signature and some lines are shown, when we look at the document witz 177% the lines and the signatures disappear.
Does someone have the same problem AND a solution?
Hajo

Hi,
I'm having exactly the same problem with my 80gb ipod on my new laptop which is also running Windows 7 64 bit and iTunes 10.1.1.4.
I initially just tried syncing photos and according to iTunes it was still syncing after 4 hours, this was for 6700 photos and I wasn't asking for full resolution, but iPod just said Connected - Eject before disconnecting. I couldn't disconnect and in the end had to close iTunes before disconnecting, then there were no photos on the iPod.
Disconnected, rebooted then when I connected the iPod I got the message that it was synced to another PC which I expected so i click to erase and synch, iPod initially showed synching then went to Connected - eject message but itunes was saying "finishing synch" it showed this for hours and out of 6543 songs on the PC it was onlt showing 6002 on iPod. I stopped the synch trie dejecting but got same message Iancenaz got. Again had to close iTunes before I could disconnect iPod safely.
I'm going to try synching it back on mhy old laptop which is running Windows XP and an older version of iTunes as I suspect its either a Windows 7 or iTunes 10 problem.

Embedded Fonts are not shown anymore

When I create a PDF from a Word Doc, the embedded Fonts are not shown anymore. In the previous Version it was working perfectly. My version is currently 11.0.10.

Thank you for your feedback. The Job im using is simple take a word document converting it into a pdf format. If this is done I will see it in my Acrobat view. There is no fonts at all. The System is notifying me that the font "ETBFGYI+DIN-Regular" are not embedded. And there will be some character not shown or printed correctly. I didn't change anything on the setting of Acrobat. I'm using this Acrobat almost for 2 years and I never had any problem. The Problem came up after the last update of the software to version 11.01.10.

[Solved] Some icons are not shown in certain websites.

For example:
trello.com
gist.github.com
is like this:
many icons are not shown correctly. It happens to all browsers(firefox,chromium,opera) I tried in archlinux. So I guess it' s an issue with some graphic library.
It also happens to a gitlab server site I set up:
How can I debug this? Does it happen at your place?
EDIT: Solved by uninstalling change colors extension for chromium, deleting .mozilla solves for firefox, still happens for opera.
Last edited by xgdgsc (2013-06-08 12:38:08)

Sorry. I don't understand. Perhaps creating a phone case will be the better way to go(?). Phone cases can be obtained here;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Placed PNG images which are made in 3ds max are not shown correctly in Ilustrator

Hello,
Why placed PNG images (renders) which are made in 3ds max (and then photoshoped) are not shown correctly in Ilustrator. Images appear very noise so you can't see almost a thing. the same pictures (renders) made in Revit appear ok.
Is there a solution to solve this issue?
Thanks.

You would have to provide screenshots of how it looks in PS, including the channels visible. MAX may have embedded extra channels that throw off AI. And of course check whether your PNG is actually 8bit, not 16bit.
Mylenium

Why Material Classification Changes are not shown in MM04?

Similar Messages

Maybe you are looking for