Why material document not able to print automatically?

Hi,
I think I have posted this question before, however, there is no answer, I will my luck again.
I have setup all the necessary configuration in NACE with my new output type and output condition in MN21, yet the printing still cannot take place immediately.
I check another output type which having printing of materail document able to print out successfully previously (same month), and I tried to post the transaction, and yet the material document is not able to show the output message record on the output message screen. All the previously successfuly posted material document having the output record shown on the output message screen, but mine is unable even though I following the same step of transaction posting.
You guys bump into any of this problem?
please share.
Thanks.

Dear Pankaj,
Your statement below:
And in MIGO, select the appropriate Print Version 1, 2, 3 and also activate "Print via Output Control" check box during posting GR at Header Level under "General" Tab.
I cannot find it in the MIGO, may I know where is it?
Thanks.

Similar Messages

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

I am not able to print a document...told I need to update AIR, but it fails to do so when I try..

Am not able to print a document from a download. Got message saying I need to update AIR, but when I tried, it failed to do so all the way..

None of these things should happen.
Can you take us through what happens, step by step (like "I see an icon for the document on my desktop. I double click on it. A window opens. At the top it says PDF Printing Window. I click OK. A message comes up saying Update for Adobe Air 3.33 needed. I click Download...". This is made up, but the sort of level we need.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Inbound document not able to created from an outbound message EDI

Dear all,
Our inbound delivery was not able to create automatically during GI for an outbound delivery. Our inbound delivery is created via an EDI output type in the header of the outbound delivery as soon as the GI is posted.
All along, all the inbound docs are able to generate. However, for this particular outbound document, which has already GI, does not trigger the inbound document creation, and I notice that the output type message having a red light status in the message output.
When I checked the error processing log on this output message type (i.e. the red status), error message said
No goods receiving point for the combination of plant 1120 and stor.loc.
Message no. VL377
Diagnosis
No goods receiving point could be found for plant 1120 and storage location for the inbound delivery item. The delivery should still take place for the goods receiving point .
System Response
The system does not permit creation of and/or changes to the inbound delivery item.
Procedure for System Administration
Check your settings in Customizing for Determining the goods receiving point.
The funny thing is I check the SPRO setup (i.e. Assign Goods Receiving Points for Inbound Deliveries), and I notice that the goods receipt point has been assigned and configured. Further, other Delivery Order which is having the same data, does not generate such error in the message output, and the inbound is able to create.
WHy?
thanks.
Edited by: tuffy on May 12, 2011 12:04 PM

Hi Sudhir,
This is a production thus, I don't want to save the inbound delivery, but it seem no problem of creating it, I will have the business create it.
So, how do i debug the idoc?
at first how do I find the idoc number of the failed transaction as when i go to the output message (i.e. in DO header) and check the processing log, system said..
Object 0082658402 (i.e. DO number)
output type: Stk Transfe Crte Deliv
Processing log for program /spe/sto_id_processing
no goods receiving point for the combination of plant 1120 and stor loc
no inbound delivery create for the replenishment order
There is IDOC no for this faild message (though GI is incurs)?
thanks.

Not able to print in MIGO

Hi Gurus,
Not able to print in MIGO transaction for the printer. Able to print all other transactions for the particular printer in SAP.
Need your expertise to solve this issue.
Thanks and regards
Durai

Are you checking (ticking) the Print check box while doing MIGO? If no, you cannot print.
If yes, are the output types configured? Do you get the output type in the material document? If no, try adding it manually.
If yes, will need more info to resolve your issue.
Lakshman

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

I am not able to print in cannon ir series 2520 after Maverick update

I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
Same case with the projector not able to connect it.

The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

Please help ,GR not able to Print

Hi Gurus ,
I would really appriciate if you could help me to fix this problem , User is not able to print GR document .
Thanks in advance.

Hi Greetings
In addition to the condition records being maintained for the GR message output type, the following setting is required in the user profile.
Transaction
SU3 -- > Parameters -->
Parameter ID "NRD" and parameter value "X".
Gobinathan G

Why users are not able to see certain printers even though they are in the Airgroup server table

Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.

The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al

Why material document not able to print automatically?

Similar Messages

Maybe you are looking for