Why might some sub-picture hilights be partially obscured?

I create a sub-picture or use a  standard sub-picture hilight (e.g. the music notes from the "Blue Notes"  video button template).  Using say 3 or 4 of this same hilights on a  Menu.  They appear to be complete and look perfect when previewed.  But  when burned to a DVD, often one or more of these sub-pictures will be  partially blocked out in appearance.  I have worked through all   obscuring possibilities. I have ensured that buttons boundaries are well  away from each other.   I have checked the menus in photoshop and  ensured that the offending hilight's group is top level.  There appears  to be no invisible blockages.  Yet like I say - all appears fine in  Encore preview, but when watching the DVD, one or more buttons will  still be partially blocked.   All buttons continue to work perfectly.
I have  spent many hours without solving this, so any thanks for reading - any  clue  would be really welcome.
David

This THREAD might be useful, but not so much as the other two.
Still searching for an earlier thread and will link to it, when I find it.
Good luck,
Hunt

Similar Messages

  • Why do some imported pictures in CS6 loose sharpness?

    Hi,
    New Photoshop CS6 user. I have a, new to me, Sony NRX 5-N camera. Just started using it and am very impressed with the sharpness of the images when viewed on my windows 8 picture viewer. When I open the same picture in Photoshop it is much less sharp loosing a bunch of detail.
    Any idea what is causing what I am seeing?
    Thanks for any advice,
    Tom
    Cape Cod

    Good day!
    One possibility might be that the viewer in question applies some sharpening.
    If you save the fle in Photoshop, then view it in the picture viewer how does it look?
    Regards,
    Pfaffenbichler

  • Why do some of my emails have blue squares with a question mark instead of a picture or bar code?

    Why do some of my emails have blue squares with a question mark instead of a picture or bar code?

    No app installed that will view the pics and bar codes.  
    Which email client are you using?  Which version? 
    File suffix of the pics & bar codes?  Example:  .pic, .bmp, .jpg, etc. 

  • Why is the button sub-picture on all the time?

    I have been told to create a menu with just one button on it... PLAY.
    Don't ask me why. I think it is weird too...
    I insert the DVD in the player, menu appears, and, a fraction of a second later, the sub-picture comes on.
    Same thing happens in PREVIEW and on an actual burned DVD.
    "Automatically Route Buttons" is OFF.
    "Default Button" is set to NONE.
    It is just a small annoyance, but I'd like the user to see the sub-picture go on and off as they move the cursor.
    Anybody have any idea what I can do?
    JP

    When you have one button, it is the default. And it is always "selected," because there is no other button. On a two button menu, the selection doesn 't ever go off, it goes from one to the other.
    You could make an invisible button, set it so no highlights ever show, and make it the default.
    But as soon as your button get selected, it won't go back "off" until the other button is selected.
    Remember too that cursor movement (i.e. mouse over effect) is only on the computer; on a TV, the remotes moves to the options.

  • Why do some of my pictures say they are temporary items in my Iphoto library?

    Why do some of my photos say they are temporary items?

    There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Why are some of my pictures blank green screens when I try to add them into a montage??

    Why are some of my pictures from my iphone showing up as blank green screen when I try to add them into imovie?

    Look under "More like this" on the right of this page, specifically "Re: no photo selected"; the discussion there may be of help.

  • Why are some of my pictures are green in imovie 10?

    Why are some of my pictures are green in imovie 10?

    I can't see the title of the clip, but my guess is that it is a WAV file or MP3.
    The colors are determined here:

  • TS3989 Why will some pictures not stream from iphone4s to ipad2,pictures taken before and pictures taken after have ,but some won't

    Why will some pictures not stream from iphone4s to ipad2,pictures taken before and after transferred ok but some won't.Any suggestions

        1.    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        2.    Photostream only syncs when the camera app is closed, ensure it is closed.
        3.    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.

  • Weird, why is some previous version of a class running

    I have this class named DataBaseDemo.java and I had it originally set up to use MySQL but then I altered it to use ORACLE.
    But I only 'half way' did the change and did a save and click the run button.
    So I was struck dumb when it did run. Then I looked at the output and I could tell that it was behaving as if I never made any changes. What it is doing is running the older previous code before I made massive changes. It is ignoring the code that comes up on the screen even though I have hit the SAVE key many times.
    So why might that be?
    And more importantly how can I get it to 'forget' the old code and remember the new code?

    Rod,
    Note that Nitin asked "Physically where is the compiled old code?" but
    you've only explained where is the source code. Somewhere there are
    ..class files produced by the compiler and apparently you're running old
    compiled code or not compiling the new code. So you must find the
    corresponding .class file of the new code and figure out where are these
    old .class files. The Java Explorer hides the bin folder (normally
    where the .class files end up) so you might need to use the Resource
    Explorer to find it.
    On 02/08/2015 5:35 PM, Rod Hittle wrote:
    > Good question Nitin. As far as I know it does not exist anywhere
    > other than a copy pasted in to a MS Word document where I am writing
    > up this issue.
    > I did check the properties of the source code in Eclipse and the path
    > and file is just as I expect and opening up the source code by way of
    > Note Pad shows just the current most recent update text.
    > My conclusion is that the text that is brought up is NOT what is being
    > executed. Maybe there is some 'compiled' version that is being executed.
    > The old version of the code is set up to pull data from a MySQL table
    > and the current text is set up to pull data from an Oracle table. The
    > tables are very different. But what gets displayed in the console is
    > data from the MySQL table.
    > I would post a picture but it looks like the only way to do that is
    > to send the pic to a place like PhotoBucket so that there is an URL
    > and I don't want to bother with that.
    >
    >

  • Why doesn't my pictures on my PC upload to my Ipad and Iphone.  Seems I have all my settings correct but none of my pictures are not showing up.

    Why doesn't my pictures show up on my Ipad and Iphone?  I have my pictures in the photostream upload folder but they do not seem to be uploading.
    Thanks.

    You will notice that in "My Pictures" folder you have a new folder called photostream. In photostream folder you will have another folder called "Upload" Anything you put in the "upload" folder will go to your phone and ipad. So just copy pics you want into that folder and they will go into photostream. I would not suggest moving them since I am not sure how it works on windows but there is a chance photostream might empty out the  folder after 30 days.
    On mac it automatically saves originals..

  • Chart Expert - Why are some formula fields not available?

    I have a report where I had to do Running Totals with formulas.  Following what I learned long ago from the documentation, I laid in my formulas, and then setup some "Display" formulas to print out the results at the end of my report.
    Now I am adding a chart to show a sort of 'summarized' version of the report - its a simple Pie chart...
    But when I go into the Chart Expert and want to select those Display formula fields (there are 4 of them) - they do not appear in the list?
    FYI - These four Display formulas are in the Report Footer of the report, and my chart is in the Report Header. 
    Why do some of my formula fields appear in the Chart Expert "select field" list - while others do not?
    I checked the documentation on this, but it is very "lite" and does not indicate why this might be...
    Any help is most appreciated!

    Read again -  "Problem has been circumvented" NOT "worked around".  In other words, when you pay a fortune for a poorly documented piece of software and you are dependent on answers from a Forum, where at times no one answers your question(s) and your boss is shouting at you as to how you selected such a lousy piece of software with such "lite" documentation and is hardly going to pay any more money for a support call to answer a simple question that should have been covered (and then some) in the documentation, (let alone support of the problem) - you CIRCUMVENT, i.e. give up and find some other way to do what you were trying to do.
    Hence, problem circumvented, NOT worked around.
    Thanks for asking - here's 10 points for your efforts.

  • I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work?

    I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work? I have OSX 10.6.8. I am using this trial version for a class I am taking on coding webpages using Dreamweaver. there are features I am using in class that will not open up or appear as options when I use the trial version. Are certain features locked out until I buy a copy or download a purchased copy?

    Trial versions have no functional limitations, though your setup/situation might not be supportive of all functionality.  You'll need to identify specific issues to get help with them.  You should be posting in the DW forum instead of here if your issue does not have to do with downloading/installing.

  • Sub pictures can't be seen on DVD

    I've created a project in Encore CS3 and everything works properly in preview.  However, when I burn a DVD the rollovers (sub-pictures) are not visible.  The DVD will work properly on my laptop but not in a DVD player.  I've tried both DVD-R and DVD+R blanks.  Thanks for any assistance.

    Please tell us a bit more about the Menu used, and the Buttons' Sub-picture Highlights. A screen-cap of the Menu in PS, or the Menu Editing Panel, with the Layer Sets opened will be very helpful.
    Also, what brand of blank media are you using?
    That you get correct Highlights on the Computer, but not on the set-top player might indicate an issue with the burned DVD and the set-top player. Problems can come from using media, like Memorex, TDK and store brands.
    Still, there might be something in the Button Layer Sets' Sub-picture Highlight Layers, and the screen-cap should rule those out quickly.
    Good luck,
    Hunt

  • Migration Assistant- Why didn't my pictures&music transfer?

    I don't own an ethernet cable, so I decided that I would use my high-speed internet to transfer my documents, photos, and music from my (3-year)old Macbook to my new one. However, it took exactly 24 hours. Apparently, it took 24 hours to only transfer my documents folder (which only has about 100 text files that don't contain that much)
    Besides the fact that it took so long, I found out that the user from my old computer was locked. I dragged the user into MY documents, and I was able to view my old documents. However, NONE of my pictures (I have around 11,000...) or my music (900 songs) were to be found, despite the insane amount of time it took to transfer.
    *Why didn't my pictures and music transfer?*
    *Is there and easier way to migrate your information that DOESN'T take a full day?*
    Also, *how do I unlock the files* without doing the whole copying process again? For some reason the copying to MY documents allowed me to open them, but its going to be a hassle re-copying all my photos etc. once they've been transferred next time.

    katy652 wrote:
    I don't own an ethernet cable,
    Get one. Better yet, if both Macs have FireWire ports, get a FireWire cable.
    Or, if you have Time Machine backups or a "clone" of the old Mac on an external drive, transfer from it instead.
    Then start over, but use +Setup Assistant+ this time. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum). You'll want to start with the green box there.
    The problem with using the +Migration Assistant+ is that you end up with an extra user account. And sometimes the accounts transferred that way aren't recognized as the same ones, thus the permissions problems.

  • Why do some videos play fine on Facebook while others have only audio with a green screen?

    Why do some videos play fine on Facebook while others have only audio with a green screen?

    Hi,
    Green screens are almost always indicative of a video driver issue.  Could you please post the contents of your "Display Devices" section after generating a DXDiag report?
    What is a Dxdiag report and how do I run one?
    I suspect you might have an out of date video driver.  This FAQ can help you learn the steps required to update:
    Windows: how do I update the device driver for my video/display adapter?
    Finally, if the driver update does not help, try disabling hardware acceleration using the steps outlined here:
    How do I disable or enable hardware acceleration?
    Thanks,
    Chris

Maybe you are looking for

  • Help With Registration Form

    Hi I have created a registration form, where on the first page the user enters a user name and password, then they go to the next page where they enter their name. This then goes to the next page where they enter their address, then there contact det

  • Variable numbers of diagrams on frontpanel

    Hi, I have the following problem: I have a system, that is communicating with the computer and is sending about 30 different parameters approximatly every second. What I want to do, is to build a labview application, where the user can decide, which

  • Error while configuring Workflow on AC 10

    i am getting below errors MSMP process GRAC_ACCESS_REQUEST version IMG Configuration tables contains errors' Path ID cannot be empty. Please enter correct value Configuration ID <stage_name> check reported errors (BADI for task TS76308026- class CL_G

  • SAP JAM integration with Cloud for Customer

    I'm in the middle of the setup of the SAP JAM to C4C integration and using the guide here https://websmp109.sap-ag.de/~sapidb/012002523100002202222015E/C4C_JAM_WP_1502.pdf. In section 2.4.1.1, it says "Contact your SuccessFactor, SAP Jam customer sup

  • [solved] Trying to make a bash function work for (chroot)

    So this is what I have so far. function arch-chroot () { sudo & mount /dev/sda1 /mnt cd /mnt mount -t proc proc proc/ mount --rbind /sys sys/ mount --rbind /dev dev/ mount --rbind /run run/ chroot /mnt /bin/bash I get stuck at cd /mnt. This is how I