Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

Similar Messages

Airplay does not work after the last update on iMac

Today I have instaled the last updates on my iMac and the AirPlay mirroring on my AppleTV does not work anymore. I can hear the sound but the video doesn't work. Somebody knows how to fix this? Really dissapponted with Apple products.

Try resettng the SMC and PRAM each 2-3 times, then post back.
Instructions are in Intel iMac SMC and PRAM resets

HT204306 My Ipad does not reboot after the last update, I tried the reset mode and that didnot work . All I get when turned on is the apple icon. Help Please?

I have and Ipad Model A1458 and serial number DMPJVX72F183 I did the last update 8.1 and since then I can not get it to work. The apple icon comes on then fades and then comes back then fades , this continues until I turn it off or the battery run died. I tried the reset but that did not work. Any suggestion?

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
Finally, if the Restore doesn't work, let the battery drain completely. Then recharge for at least an hour and Restore again.

Airplay is not working after the last updates

Hello,
I've updated iphone, ipad air and ipad 4 to ios 8 and apple tv 3 (1469) to newest version (7?).
After that it's absolutely a disaster.
Mostly I using the apple tv for music streaming, sometimes for mirroring...
But it can not be found, I can not select the apple tv on ios devices because it is not there!
The airplay symbol comes after swiping the menu up after approx. 1 sec and theres only the Denon Cocoon to selcet but not the apple tv.
The same on the iMac I can not choose the apple tv directly from the top bar for mirroring and not in itunes for music streaming (but the Cocoon is there), and this altough the imac is also via ethernet on the same router, no wlan connection is required for streaming in this case.
The apple tv is connected by ethernet to the router and I see in the router menu that the apple tv is connected to the internet.
I did a hard-reset but this did not help.
I've tried also with blutooth on or off and rebootet the ios devices.
From time to time one of the different devices shows the apple tv...this morning for example after I turn blutooth on at the iphone and waited 30 seconds, it was there and it worked - sometimes on device shows the apple tv without blutooth and if I connect, nothing happen and the music starts on the device itself.
If I start the apple tv via remote, everything is fine, I find it at all devices including the imac!
If I managed it to start the music streaming with an device (as written, from time to time it works) the apple tv is avaible on all other devices.
For me theres no question that theres a bug in the new apple-tv software (because I can not find it on the imac as well, otherwise I would think the bug is in ios 8).
It is not possible to wake up the apple tv via airplay from sleep mode, I think that is the problem - if I turn off the sleep mode everything is fine.

the1sen wrote:
There appear to be many others with the same issue on here.
Nothing unusual in that after an update.
Generally speaking it's fairly obvious from the volume of such posts if there's a problem with an update or not. On this occasion I'm not seeing the sort of numbers that indicate a widespread issue.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

Why don't my fonts work after the last update?

I just updated my laptop & now all my fonts won't work! EVEN if it says it is the font I've selected!
I use Microsoft Word & Excel on my Mac.
Also, the fon't are listed as:
1-True Type
2-Open Type
3-Postscript
Under:
/Library/Fonts/then name of font
/Library/Fonts/Microsoft/then name of font
/System/Library/Fonts/then name of font
/Users/terri/Library/Fonts/then name of font
What the heck is happening? I have NO idea what all the above means.
I just love using FONTS!!!
ANY help/comments/insight you may have would be appreciated!
Thanks!
Terri

I'm having this same problem. These community forums can be a huge waste of time. Seems like the hard questions never even get answered. My iTunes won't play my HD movies that it played before the last iTunes update. Now that I upgraded to Yosemite it's even worse.

Friends "buddy list" not showing after the last update..!!

I just downloaded the update and for some reason i cant see my friends online, i tried restarting couple of time and its still the same, and two of my other friends are having the same problems, any advise ?

First.
Repair permissions.
Applications > Utilities > Disk Utility
Highlight your Mac's HD and click the Repair Disk Permissions button near the bottom.
Restart iChat

Problems in XORG after the last update.

My gdm not works after the last update.
GDM open, but when i try login, this panel close and open again.
My xorg.0.log http://pastebin.com/epTaJ1zN
Please help-me !

Which graphics driver are you using?
A nice alternative display manager for while you try fix gdm is lightdm https://wiki.archlinux.org/index.php/LightDM
otherwsie:
https://wiki.archlinux.org/index.php/GN … .2B_cursor
https://bbs.archlinux.org/viewtopic.php?id=161900
Last edited by jrussell (2013-06-04 17:01:41)

Why does itunes crash upon opening after the software update?

Why does itunes crash upon opening after the software update? Everything worked fine until I decided to update this morning and as soon as the computer rebooted, the error message appeared. Is there anything available to fix this?

I answered the same question in a similar post. It's all to do with the wireless sync.
I used the following method to stop iTunes from constantly restarting -
Open task manager
Select the 'Processes' tab.
Look for 'iTunesHelper.exe'
Select 'iTunesHelper.exe' then click on 'end process'
Hope this helps.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

After the last update iTunes no longer works... "This application failed to start because MSVCF80.dll was not found. Re-installing the application may fix this problem" I tried and it did not fix the problem?

Click here and follow the instructions.
(99061)

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file fr

After the last update that was pushed out by Adobe, my Acrobat 9 Pro will not generate a PDF file from; [right click], Combine files into one PDF multiple files chosen in the explorer. A message pops up asking if I want to run repair. Answering in the afirmative results in another message stating files are missing. And we are back at square one.

What is the exact error? Else you could always reinstall your software.

After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

Hello LKBrown608,
The article linked below provides some useful information that can help get iTunes running on your computer.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Cheers,
Allen

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

Why MLB.TV is not appearing after the last update?

Similar Messages

Maybe you are looking for