Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?
Sir,
My developer ver is 12.1.3.0.0.
I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
What could be the reason any help on this issue
Should I use MS Access or not but I want to use ms access for very small databases.
Regards
If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
You'll see that ms access is not supported.
You can use oracle xe which is free for your project.
Timo
Similar Messages
-
My ipod shows up in itunes, but does not show up on my pc as a drive
my ipod show up in itunes - but does not show up on my pc as a drive
cannot figure out why it now doesn't show upMaybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer? -
USB Drives works, but does not show up in "Safely Remove Hardware"
USB Drives works, but does not show up in "Safely Remove Hardware"
windows 8
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank youHello Mickey2003
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
H800-30ea,USB Drives works, but does not show up in "Safely Remove Hardware"
hi
USB Drives works, but does not show up in "Safely Remove Hardware"
Here are my symptom
- USB Flash Drives , USB External HDD works normally
- I can see them in "My Computer"
- I can open "Safely Remove Hardware" via Run Command, but there is no device in the list
- They show up as "Disk drives" in device manager
- When I right click their icons in "My Computer", there is no option to "Eject" them
- In "Disk Management", they show up as "Basic". Prior to this issue, they were "Removable"
After I tested, it seems that my Vista detects every USB storage device as a normal HDD.
I don't know why but I'd appreciate any help because I have to plug-in and remove those drives often, especially flash drives.
Thank youHello takpesar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues in Windows Vista with your USB Storage devices not showing up in the Safely Remove Hardware list. I am providing you with a link to a Microsoft Hotfix for this very issue titled An external USB storage device may not appear in the Safely Remove Hardware list in the notification.... I would recommend you review the KB document and ensure you a familiar with the Hotfix information and run the hotfix to resolve the issue you are experiencing.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
Any help is greatly appreciated.Try restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
-
I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device. I've already spent way too much time trying to figure this out and it's driving me crazy! Thanks for any help you can offer.
This is correct. It will not show in finder. It is not an external storage device.
The music sync is one way - computer to ipod. The only exception is itunes purchases. Open itunes connect ipod, do not sync, click File>Transfer Purchases -
Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video. How do I make the DVD contents available on the iPad?
Thanks! For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine. It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do. The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
So, thanks anyway! Pretty cat!
Mona -
Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanksDid you tap "Show older backups" on the Choose Backup screen (see image below)?
-
I have a new movie rental in my iTunes account on my Mac Book Pro but does not show up on Apple TV. All my other purchased movies are in there OK. Any suggestions?
It won't show up on your Apple TV until it is fully downloaded into iTunes on your computer, have you done this.
-
When I try to sync my music on my iPhone 4 I have a tab at the top that says 'on this iPhone'. This is at the end of all the other tabs like info, ringtones, music etc. The music in that tab is always on my phone but does not show in my itunes library. How can I get it into my library? It doesn't sync either.
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
I have a honda civic with USB port which allows play back of my old iPhone 4 and 4s. With the new iPhone 5 the radio shows the phone is conected but does not show any music content. Any Suggestions?
You should be syncing your contacts with an app on your computer or cloud service (iCloud, Gmail, Yahoo, etc), and not relying on a backup. If you haven't been doing this, start now and then restore your old backup. You will then be able to sync the new contacts back into the phone. However, you will lose all messages, etc newer thant the backup.
-
My ipod will charge but does not show in itunes or windows
I tried to use my ipod as a disk to transfer my itunes library from my desktop to my notebook (both Dell), now my ipod charges, but does not show up in itunes or on either of my computers. I have used the advice of going to control panel and unchecking the box under power management but that didn't work, CAN SOMEONE PLEASE PLLLEEEEAAAASSSSSSSEEEEEEE HELP ME?
I have windows xp on one and vista on the other, if that helps.This worked for me, don't know if it will for you. Have ITunes open. While IPod is connected to computer press(at the same time) the menu and center buttons until your screen goes black and shows the apple icon then immediately press the forward button. Your IPod should show up. It won't hurt to try it, even if it doesn't work. Hope this is of some help to you.
-
How do I uninstall a program that is running in the background but does not show in Force Quit?
Open Activity Monitor and look for the program. Select it and Quit or Force quit it from within Acitiviy Monitor.
Search for the application with Find Any File as it can search areas that Spotlight can't, like invisible folders, system folders and packages. You can drag the app and any associated files from the search result window to the Trash bin in the Dock.
OT -
My playlists show how many titles are in the playlist but does not show the list of titles
my playlists show how many titles are in the playlist but does not show the list of titles. Is there a setting that I hit by mistake to hide the content?
Perhaps you have made one column extra wide and the window isn't currently showing the Name column. Try resizing columns, turning off those that you don't need, or scrolling sideways.
tt2 -
When i receive a second call my phone will beep but does not show the number that is calling or give me the option to take the second call?
We appreciate your feedback on this matter, gingerspice913. I've not come across this issue before. Do you know how long it has been since the issue began? Please try to reset the network settings to see if it helps http://vz.to/1swAJbD?
TamaraH_VZW
Follow us on Twitter @VZWSupport
Maybe you are looking for
-
How to Connect My Printer to The Network
My printer is LaserJet M1212nf. According to the brief introduction I should connect the printer to the network first in order to enable its e-printing function. I'm working at home. I don't share information with other computers. Does "network"
-
SAP 4.7 XML data exchange using XSLT
Hello All, Hopefully the right place to post such article but here goes any way. My project involves producing XML files and then reading them back into to SAP internal tables. I am ok with writing SAP data to external XML file but reading it back in
-
Adding as segment which is already used in in the bais idoc type .
HI Every one Could u pls clarify me can we add a segment which is already being used in the basic type . If so how to do that . Thanks in advance . Example : We have basic type as : ACC_DOCUMENT03 For the above basic type we have different segments
-
Can't run set up on my MacBook
I just bought the Wireless-G Broadband Router. I've plugged it in and I can connect to it just fine... unfortunately, so can everyone in my building. How do I create a password for my network when I can't run the set up on my Mac?
-
when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuo