Why my 1st generation nano earbuds not working with 6th generation nano?

Hi there,
I had a 1st generation iPod Nano and Apple just replaced it with a 6th generation nano, however the earbuds jack of my 1st gen does not fit all the way into the 6th gen, it leaves a tiny bit outside and I couldn't push it all the way in, though I could hear sounds through the earbuds. Is there anyone out there that experience this? I thought the earbuds connector is universal.
Also, I'm not sure if this is related to the earbuds not fitting all the way in. My new Nano shuts itself off about 1 minute or 2 after I turn it on, I am thinking it may think there is no earbuds connected to it, could this be why?
Thanks for any help!
Ray.

Push harder, the headphone jack on the 6 is very tight when new.

Similar Messages

Why does my left earbud not work with any earbuds?

my left earbud skips and dosent work with any earbuds even ones i just bought from the store.

Hi,
joe12345757 wrote:
my left earbud skips and dosent work with any earbuds even ones i just bought from the store.
How does your left earbud not work with other earbuds? Do you mean the left earbud doesn't work with your iPod?
---likeabird---

TS3474 I purchaed the earpods with mic & controls and they don't work with 6th generation nano. Are the features supposed to be compatible with this model of nano?

I purchased the earpods with mic & controls and the features don't work with 6th generation nano--is this normal?

Hi there,
According to the product page:
The remote and mic are supported by all models of iPod, iPhone, and iPad (not all models support volume up/down functions). Audio is supported by all iPod models.
Your iPod Nano may be one of the models that does not support the volume up/down function. Take a look at the page below for more information.
Apple EarPods with Remote and Mic
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
-Griff

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

Why does my camera connection kit not work with my ipad 1 after updating on ios 5?

Why does my camera connection kit not work with my ipad 1 after updating on ios 5? What can I do to make it work again?

It should. It will only respond if there's something on the card for it to respond to, so do you have pics on the card?
And if it's messing up; try giving the iPad a restart. Hold down the sleep and home keys, past when you see hte red power down slider and until you see the silver apple. Let it reboot and try again. That can clear up any glitches on the device itself.

Why does Corel Suite 10 does not work with Lion OS?

Why does Corel Suite 10 does not work with Lion OS?

Either it's incompatible or it's a PPC-only application. PPC applications are no longer supported in Lion because there is no longer a Rosetta emulator. Contact Corel for support.

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

Why my phone's Android apps not work with normal ph data connections???

After 10.3.1.1779 update my phone Q5 had facing lots prblms... at first I can't download anything from amazon app store with normal deta connection, 2nd android apps not work with normal mobile deta connection its always need wifi, 3rd mobile search engine not worked properly and also contact books always show no contacts after restarts it's fixed bt some time later it's starts again... and pls give update for facebook.... plssss plssss blackberry fix those problem.....

Can I see your /var/log/Xorg.0.log through Pastebin?

Why CUA (Release 7.00) is Not Working with Old Clients(Release 4.6C, 4.5B)?

Hi all,
We have CUA (release 7.00) that is not working with older release clients. I implemented 2 release 7.00 clients to CUA; they both work fine. However, when I implement some older release clients (like, 4.5B, 4.6C, 6.20 and 6.40) to CUA, I can only create ID and pull out to client, but roles do not go through.
It is kind of argent.
Do anyone know how to fix it????
Thank you for reading this.

> It is kind of argent.
I think you meant "ardent"...
THe word u r g e n t is blocked by our content filters, because a while back everything was like that and these forums are actually discussion forums...
Anyway, sounds like faulty config or perhaps a problem with logical system assignment.
Have you checked that? Also check in SCUL?
That you can create users but not assign roles might also be that in the lower release systems they are checking activity 22 (assighn) AND 02 (change) to assign the role. Doesn't make sense, really....
Check the drop down menu in table PRGN_CUST for the option to change this, and compare whether the settings are different.
Cheers,
Julius
Edited by: Julius Bussche on Jul 30, 2009 11:34 PM

HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
Can anyone help me out? I can't seem to resolve this and I'm an apple head

I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
All worked fine with IOS 5.0
Whats going on?

1st Generation iPod (5GB) not working with new iMac

Hi,
i have the Problem, that my 1st generation iPod is not detected by my new imac (20'' 2,4 Ghz). When i plug in the firewire cable, nothing happens. DiscUtility sees no disc at all.
But when i plug in the iPod "behind" another Firewire disc (acting as a fw-hub), the iPod ist detected within a second, and everything works fine.
I just wanted to know if someone else is having this Problem, or if someone else has a working iPod 1.Gen on the new iMac.
Thanks
Joerg

Hi JvdL,
I am one with a 1st gen iPod (Windows, 10GB).
But I have no problems with it and I also don't have a last gen. iMac.
However, in the iPod Forum http://discussions.apple.com/category.jspa?categoryID=151 and in the iTunes Forum http://discussions.apple.com/category.jspa?categoryID=149&start=0#threads there are quite some threads with similar problems.
Sorry
Stefan

Why is my page orientation button not working with the new update to pages?

Since I have updated my pages my print orientation button is not working. amy ideas as to why that is and are ther many people with this problem???

We are all busy with many other problems in Pages 5.
Unless you have found some real reason to use Pages 5 just go back to Pages '09 which should still be in your Applications folder, until Apple sorts this all out.
Peter

Old second generation ipod shuffle not working with itunes

So i recently found a old ipod shuffle 2nd generation but could not find the charger/sync cable so i found a usb to audio jack. i pluged everything in correclty but it saids the usb connection is an unknown device and itunes doesnt connect it or reconize it in devices so will i have to buy a seperate charger/sync cable or do anything to make this one work .
thanks

Hi Luke,
If the iPod is not showing up in iTunes or being recognized by the computer you may want to follow the steps in this article -
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thanks for using Apple Support Communities.
Best,
Brett L

2nd generation iPod touch not working with docking station. Any solutions?

I've recently purchased a Philips micro music system (DCB2020) and whenever I put the iPod on the dock, it makes the connection sound but won't play music when I select the dock function. I've tried an iPod nano and that works so I don't think it's a problem with the docking station. My iPod touch is 2nd generation and has 4.2.1 software update. Does anyone have any idea how I could make the iPod compatible with the docking station?

OK, Then sometmes this works:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store and bring the dock.
Apple Retail Store - Genius Bar

Why my 1st generation nano earbuds not working with 6th generation nano?

Similar Messages

Maybe you are looking for