Why my airplay mirror doesn't works? when I tap in the button mirror, it closes automatically and return to the task bar

Hello supporters, I have an ipod touch 5 blue with ios 7 in his last update, and when I connect my pc to my ipod with REFLECTOR to mirror with AIRPLAY it closes automatically in my ipod. I mean... ALL is connected, the router wifi, internet, and reflector on pc is open.... When I press the button of AIRPLAY on my IPOD TOUCH 5 on IOS 7 it let me choose a few options: Ipod touch; and my PC... When I choose MY PC it let me to enable the MIRROR button... When I press the MIRROR BUTTON, it closes automatically all the menu and returns to the task bar and when I try then the same thing later now the menu doesn't closes but when I tap on my AIRPLAY DEVICE "PC" it doesn't selecct, I cant select my pc, and I can see it on the airplay devices in the menu... In conclusion I cant set up my airplay mirror. Why? I think all its working great on my ios device and with my pc.. I said that cause all the people on youtube and on the internet can run it perfectly with that software and I can't! Hope you can help me soon

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Similar Messages

HT201365 How do I close my apps with new upgrade? It doesn't work when you double click home button and hold until the x comes?

I just upgraded to new iOS 7.2 and I don't know how to close out my applications? It doesn't work with the double click of home button and simply holding until the x shows?

Tap Home button twice then use an upward swipe on the preview to close the app

Since replacing hard drive, "restore previous session" button doesn't work, can only do it through history tab. Also will not start up from task bar icon.

Hi, been using Firefox for some years, had to replace hard drive recently and re loaded Firefox. Since then, the restore previous session button doesn't work, but I can do it from the History tab. Also Firefox itself won't start from the task bar or desktop, only the start menu.
Using Windows XP

This function may not be available for mobile yet. You can put your suggestions to the [[Suggestion Box]]. Thanks!

Error Message: iDVD doesn't work because someone hacked onto your HTM CSS Programmed Intel Device and changed up the format of your DL router. Therefore, the application IDVD was destroyed in the process

Does anybody know what this is about? I've tried looking it up on google, but with no success. Thanks.

Try reinstalling iDVD from your system DVD. http://support.apple.com/kb/HT3415

Can I use Factory re-set to fix that ? My Screen doesn't work when I put on mini display to HDMI My TV then set Mirror Main Screen.

Last week I bought a miniDisplay to HDMI port. My macbookpro to SonyPlaystation 3D TV , it's work petty well on default setting. But when I set to Mirror setting, macbookpro screen turn to blue(more like computer is setting) then turn to normal and 1 second later turn to blue......that's a loop...never stop. only when I took out the miniDisplay to HDMI port, that stop...The TV doesn't have signal.
I tried to delete apple.display.config files, but I can't find all of them( I already followed Apple support page article), so this way still doesn't work for me.
what way can help me fix that?

Disconnect the external monitor and any other third-party peripherals. Be sure to backup your files.
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
         optical drive and restart the computer. After the chime press and hold down the
         "C" key. Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing

I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing my document using Microft Word 2010. I have tried using the tab add-in, but it doesn't respond either. The only way to convert my document is to save it as a .pdf from the save as drop down box. I need to be able to have the full functionability of creating a PDF document with the tabs and links working.
Please help!

From OFFICE 2010 you either have to have AA X or just print to the Adobe PDF printer. You give no information on your operating system or specifically what you mean by PDFing -- there are multiple ways to create a PDF from a WORD document and you have given no information. However, in this case your only choice is to print to the Adobe PDF printer. Otherwise, you need to upgrade Acrobat.

I Have a UITableView with 17 row. in last 17Th row i applyed cell.selectionStyle = UITableViewCellSelectionStyleNone; and in this row i also put UIButton with Image - my QUESTION IS that i want in 17Th row when user tapped Image on button is hide and wh

I Have a UITableView with 17 row. in last 17Th row i applyed cell.selectionStyle = UITableViewCellSelectionStyleNone;
and in this row i also put UIButton with Image …
my QUESTION IS that i want in 17Th row when user tapped Image on button. then Image is hide and when user again tapped then image is shown …
so PlZ…help me how can i put logic..
Thanks FrNdZZzzzz…

Sign in:
https://developer.apple.com/devforums/
If you're not a developer, you need to join first:
https://developer.apple.com/programs/register/

Mountain Lion AirPlay Mirroring doesn't work on newest MBP

Hello,
I have a 15" MacBook Pro Mid 2012 with OS X Mountain Lion installed. When Apple TV is available, there is an AirPlay icon in the menu bar. When I enable AirPlay Mirroring, my Apple TV turns into black but sound is streaming. No image at all. I tried different screen resolutions but none of them works, my TV supports 1080p and my Apple TV is 3rd generation with newest software (5.0.2). When the AirPlay Mirroring is enabled, there is a high upload speed so I believe the image is actually streaming. And there is no update for my Mac system. When I use iTunes to play a video, then that video can show up on the Apple TV, but besides that, mirroring doesn't work. My Apple TV has no issue when working with iPhone and iPad AirPlay. Do you have any ideas about this? Thank you so much!

Hey,
I have the exact same problem. Read at least a dozen forums, and wasted 3 hours solving it.
Finally, a simple 'restart' solved my problem....
Hope it will for you.

My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

BitmapData draw method doesn't work when the project is published as the .swf file of the web applic

Hi,
        I am totally confused by this strange error. When I tried using the draw method of BitmapData to draw a movieclip symbol of my project, it seems to work fine locally. However, as I uploaded the published .swf file to my web server and launched it as the plugin of my web application, it failed. The source codes as follows,
function printscreenClicked():void
     //ExternalInterface.call calls a javascript function to print message1
    var bd:BitmapData = new BitmapData(stage.width,stage.height);
    //ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
    //ExternalInterface.call calls a javascript function to print message3
message3 didn't show at all. Instead, the browser console shows "Uncaught Error: Error calling method on NPObject.". My understanding of this error message is that the .swf is calling something crashing, and I believe that bd.draw(stage)is the crashng method call.
Also, here is my html embed tag:
    <embed src="/tests/videoplayer.swf" id="flash" quality="high" height="510" width="990" scale="exactfit" name="squambido" align="middle" allowscriptaccess="always" allowfullscreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" style="margin: 0px auto;clear:both;position:relative;"/>
Can someone help me?

Thank you for your reply.
I tried stageWidth and stageHeight, but it still doesn't work.
The draw() methid is triggered when I clicked a screenshot button in my application as follows,
ExternalInterface.addCallback("printscreenClicked", printscreenClicked);
function printscreenClicked():void
     //ExternalInterface.call calls a javascript function to print message1
    var bd:BitmapData = new BitmapData(stage.width,stage.height);
    //ExternalInterface.call calls a javascript function to print message2
bd.draw(stage);
    //ExternalInterface.call calls a javascript function to print message3
Would you please give me an example of "waiting for Event.RESIZE is good, or just at least Event.ENTER_FRAME"?
My real purpose in this application is to capture a snapshot of a streaming video. The video is contained in a movieclip object. I tried stage first since BirmapData.draw() doesn't work when drawing the movieclip on the web site. Do you have any suggestion for this situation? Also, is there any good method to find out what happened if the browser have "Uncaught Error: Error calling method on NPObject."?

I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

I have different account ID's with my iphone and computer.
I would like to standardize both to just the one.
One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
Is there an easy to fix this please, Fabfitz

If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address. This explains how: Change your Apple ID - Apple Support.
If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address. This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response.

They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?

Look here
Order product | Platform, language swap

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

Why my airplay mirror doesn't works? when I tap in the button mirror, it closes automatically and return to the task bar

Similar Messages

Maybe you are looking for