Why my application requires "Full Internet Access"

I am creating an apk build for GooglePlay with Adobe AIR integrated, and my application requires "Full Internet Access". I didn't set this permission requirement, but it appears, why?

An application built in Flash or Flex, runs on "AIR" in Android, does not run natively, and how to connect "AIR" with Android, is through a local network, then that permission "Full Internet Acces" is to allow a local connection between AIR and Android, yes, I know it's silly, but so it is.

Similar Messages

HT201210 When I try to do a software upgrade from 4 to 6 on my ipad I get a Network error message. i have full internet access. Any ideas?

I am trying to upgrade my ipad ios 4 to IOS 6 or above. I get a network error code saying the ipad upgrade server cannot be contacted. I do have full internet access on a high speed connection. Any suggestions?

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

TS4002 My iCloud email account in mail.app keeps been 'disconnected' despite me having full internet access...

As description,
I keep having issues where mail.app keeps losing collection to the icloud account for no apparent reason, even though I have full Internet access?
any ideas?

Sorry David,
Really appreciate your help did not mean to confuse things.
I am having issues primarily with mail.app in osx (keeps diconnecting)
most of the time mail comes through to my iphone/ipad with no issues. However sometimes I have push issues with the iphone, it breaks until I close and reopen the mail app in ios (I belive this is an issue some others have)
The issue with ios started when i transitioned to iCloud from MobileMe (was .mac previous to this) the issue with osx only staretd with Mountain Lion?
Hope this is now clear. (Could the issue be server side, apples end?)

Flash player requires external internet access?

Hello,
I'm wondering if flash player requires access to the external web to run. I have a machine where external internet access is blocked. When I load my webpage that contains a SWF, Flash player seems to throw the #2032 error and fail.
Can anyone confirm if the Flash player connects to the web during startup? If so, can this be turned off? If not, I'm trying to find what may be causing the famous 2032 error.
Thanks
Udam

You may need to turn off Flash Player update checking. Unfortunately this also needs Internet access (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l).

Why can I not get internet access today?

I was not able to get internet access at home this morning and now I can't get it at the office. G-mail says the mail server is not responding. Also, none of my apps are loading. Verizon, please fix this!

Criggs, we have work to do! We can't have you without service and access to your g-mail account. Do you have wireless or landline service? Which wireless phone do you have?

Does managing Oracle 10g RAC with ASM require full root access?

We currently have three entirely separate support areas, Unix, Storage and DBA. We're now considering using Oracle 10g RAC with ASM and as part of the assessment trying to work out if we can still draw similar support boundaries. I know that installing RAC and configuring ASM requires root access but will DBA continue to need root access to manage & support RAC? If so, does anyone know if the commands they need can be RBAC'd or if we just need to share root access going forwards. I've had a look at a number of docs including http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm. which is fairly informative but none of them seem to mention the requirement for root access on Solaris. I'm guessing they just assume that it's available, but that's not generally the case in our environment.
All advice / info welcome!

I would have thought that the only reason you would need root access once RAC and ASM had been set up would be to add more disks to the ASM configuration. This would be needed to change the ownership on the raw LUNs or to make additions to metasets (SVM/Oban) or diskgroups (VxVM/CVM). Beyond that, I can't imagine needing root access.
I'm sure others will chime in if they can think of other reasons!
Regards,
Tim
Edited by: Tim.Read on Jun 3, 2008 2:25 AM

Why does it say no internet access when I connect my laptop to my personal hotspot IPhone 5S?

Every time I try to go on a webpage it says no internet access on the Internet bars

Hi, jon.baldauf.
These articles will help you troubleshoot the issue that you are experiencing when attempting to connect to the iTunes Store. Make sure after each troubleshooting steps to test the results.
iTunes for Windows: iTunes Store connection troubleshooting
http://support.apple.com/kb/ht1527
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
There is a possibility that security software installed could be the cause of the issue. You may have to process the steps in this article.
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Cheers,
Jason H.

HT4199 why can't I get internet access on my ipad mini when attached to itialian router whilst on holiday

I live in France but I am in Sicily on holiday for a month's holiday. My ipad is showing that I am connected to a router in Sicily but I still can't get internet access and on facebook it is marked 'network error'

Hello there, sheilafromfra.
The following Knowledge Base offers up some great steps for troubleshooting the Wi-Fi issue on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Why do I not have internet access when my phone says it's on LTE?

I am currently having internet connectivity issues. My phone will say it's on LTE, but when I try to use an app that requires internet connectivity, it says that I need to check my internet connection. I can't refresh facebook, check e-mails, or send iMessages. When I join a Wifi network, everything works as it should. I've tried doing a soft reset on my phone multiple times by holding the home and sleep button down until the phone reboots. I've also restored network settings, but nothing seems to be helping. Just wondering if anyone had any tips before I had to take it into the Verizon store.

meganweers,
I am sorry you are having these issues with accessing the internet on your device. Thank you for all the troubleshooting you have done thus far. Have you tried to remove and reinsert the SIM? http://vz.to/1irq2bL Are you able to send text messages and use voice just fine? Are there others reporting the same issues with data connection?
LindseyT_VZW
Follow us on Twitter @VZWSupport

Why don't I have internet access?

My ipad does not seem to respond to Wi-Fi.. Mi ipad shows that i have internet connection on the top left corner ,but when i tried to use safary it wont let me....What can I do to get safary and my apps working??

ok,well first of all thank you for helping me!!!
I'm not using my home Wi-fi..im using one near here.which does not ask for password, is has never done it,
so when i press on the wi-fi's name little signals appear on the lower left side on the screen..
I been using that network for like a month and all of a sudden it stopped working!!
I Hace tried:
Resetting network stting
I have turned it off millions of times
I tried ressteing my ipad with itunes but it says if i do that it says that all my data will be erased!
and i have tried going to safary to see if there's some areement thing that some networks require..

Blocking internet access in a virtual windows xp box

Is there a way to block internet access when I have a virtual windows xp box within Windows 7?
The reason, is I just want to run one application and restrict internet access as I some users are restricted from the internet.
Thanks
John

Hi, Juke.
I'm afraid I'm a dummy, and don't know how to do this. I'm sure as April 8 approaches, a lot of people with important DOS or XP apps will be wanting to insulate their XP VM from potential hacking while still running programs locally.
Thanks -- Dave K.

Turning on Full Keyboard Access for PB G4

I'm a new Mac user with a PB G4 15". I've searched the forums for an answer to this to no avail.
In The Tao of Mac (http://the.taoofmac.com) the author says: "If you're keyboard-oriented, go into System Preferences | Keyboard and Mouse | Keyboard Preferences and Turn on full keyboard access. Now you can deal with dialog boxes the way you're used to, as well as accessing menus and toolbars with the keyboard."
When I try this on my PB, there is no "Turn on full keyboard access" button - although the Keyboard Shortcuts tab does have a checkbox for "Turn full keyboard access on or off" with a shortcut of ^F1 (which doesn't seem to do anything).
I'm very keyboard literate and would like to access menus in the same manner as i can with Windoze - i.e. Alt-underlined letter in menu, e.g. Alt-f brings up file menu.
Any help most appreciated.
Regards...john...
Powerbook G4 15-inch Mac OS X (10.4.3)

This may make-or-break my resolve to switch to Mac.
While I adore the interface, the graphics power, the
art/design tools and sensibility of the Mac, it
really is like "typing with boxing gloves on" as
someone warned. Makes sense for an OS that
introduced the GUI and the mouse, I'm still finding
it difficult to adapt to that style of work. For
me, taking my hands off the keyboard to use the
mouse is anathema.
You have nearly as much keyboard control as on Windows, it's just different. And in some cases, better. For instance, when two menu commands start wit the same letter, the alt key can't be the same for both commands, so Windows assigns a different letter to one of them so you have to learn it. The Mac way can be faster because you don't have to learn the alt key; instead, you just start typing the command name and it's selected as soon as a match is made. For example, if I have two commands, "Slide Show Options" and "Save Slide Show as Movie," I know that there are no alt keys to memorize, as soon as I drop that menu with the keyboard, typing "sl" will select "Slide Show Options" and typing "sa" will select "Save Slide Show as Movie."
In dialog boxes, be aware that many Mac developers have implemented single-key shortcuts for buttons, which do not require full keyboard access to be turned on. For example, if a "Save changes before closing?" dialog box comes up with "Save and Close," "Don't Save," and "Cancel" buttons, and "Save and Close" is the default, the Enter key will hit the default key, the Esc key will hit the Cancel button, and the D key will hit the Don't Save button. It is also possible, depending on the app, that the S key will hit Save and Close and the C key will hit Cancel.

TV 40-46" 1080p 120hz with FULL internet browsing capacity

It looks like there are only 2 tv makers that allow for the full internet access (LG and Sony). I can't find a reasonably-priced sony KDL-40/46EX620 (sold out by BBuy). KDL-40/46EX720, the next model seem to be at 60 refresh rate.
How does the blu-ray work? can it allow the FULL access to the internet or is it only for connection to the pre-set locations, such as u-tube, netflix etc?
Another Q: Do I need the smart TV to watch my downloaded movies?
tnx

Quote
Let me just add some comments here that conflict with some info already provided. First of all, Sony has not reverted to cheap parts to build their TVs, and they are not as bad as suggested. However, I do agree that Samsung and LG LEDs have better quality, as do Panasonic plasmas (not their LCDs), and of course Pioneer hasn't made a TV in many years.
The reference to the problems with 120 hz was to a four year old post that was indicating problems with 24 fps film based material. Many of these problems have been alleviated in the past few years, however many people (me included) would turn this function off (which is always an option) when watching 24 fps material (such as Blu-Ray). On the other hand 120 hz does do a very good job of reducing blur and providing a sharper image for tape based material, especially beneficial for all sporting events. It is worth the extra cost.
The reference to full web browsing by some manufacturers is probably somewhat of an overstatement, however those with a built in browser can link to well over 95% of the sites that google would bring up. The most exceptions are major video providers such as ABC-TV, CBS-TV, etc. The built in browser is still a plus for these TVs, but they won't totally replace your computer.
The TVs with the browser are the higher ends of LG and Samsung (models 8000, 7000, and I think the 6900). The nice thing about the Samsung models is that they include a full QWERTY keyboard on the flip side of the remote. The Sony Google TV also has this capability, but I believe that it is overpriced and not as good quality of picture as the LG and Samsung models.
End Quote
Perhaps you can provide us with some verification of your poitns? Particularly about the 120Hz. For your information, 24p interpolation is the only time if might actually do some good! So, you have it backwards. If you can provide any verification, other than from the manufacturers, that shows that it has any affect on motion blur, then post away. Hint: Flashing the same image over and over does not make it sharper, and if motion interpolation is involved, the frames created in between the 60Hz broadcast frames are artificial, and cannot be sharper than the original. SO, post away...I'll be interested...
I guess you also have not used the browers that you reference that you claim can access 95% of websites that google brings up. Startling numbers that go against both my real world experience and any testing/review/rating that I have ever known.
As far as to the quality of Sony TV's you are entitled to your opinion, but with the high return rates, the high failure rates, and the legendarily bad Sony "customer Support", anyone who knows anything will recommend against them. They *are* cheaply made. They *DO* use inferior parts. There sets *ARE NOT* competitive in picture quality to the other big name players. Even a cursory, casual comparison will veryify this.
A full QWERTY keyboard is nice, but that does nto equate to a full browser. The operative word is full....not borowser.
Thanks
If you find my post useful or informative, please click the icon below with the plus sign and star to give kudos. Thank you!

Why does Adobe Air Captive Runtime require Internet Access on Android?

I am developing a children's app on Adobe Air and just learned that the Internet permission is being forced by Adobe Air. The only comment I saw on these forums was from someone stating it was so the Adobe Air App can communicate to the Adobe Air package, which doesn't make much sense-- but even still, I am bundling the Adobe Air Runtime within the App itself.
This affects me because as a children's app, some of my customers (e.g. Parents) will see the requirement of an Internet connection as a bad sign, in that my app may be loading content from the internet, or collecting data about their child or device and sending it over the internet.
I think Adobe should be clear as to why their platform requires internet access. Thank you.

I have the same problem. i have tired AIRSDK 3.1 & 3.4, my app can run normal without Captive-runtime mode in my nexus s, But keep getting the message "unfortunately, (myappname) has stopped" when packed with Captive-runtime.

Why does Reader require Internet access everytime?

I am using Adobe X. Can anyone explain to me why this application must have access to the internet everytime it is opened? What are the implications if you block reader 100% of time using your firewall... other than having to do manual updates?

Here is the link.
http://get.adobe.com/reader/enterprise/

Why my application requires "Full Internet Access"

Similar Messages

Maybe you are looking for