Why my atv can't set time and date after restoring it using itunes ?

when my atv restarting after  I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.

The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.

Similar Messages

  • Apple stays on setting time and date after restore

    apple tv stays on loading setting time and date

    It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.

  • Can not set time and date fax setting on officejet 4620

    Can not set the time and date on Officejet 4620 when faxing.  There are no setup options available.  The log always shows "Jan 00  00:00 AM".

    The time and date setting should be under the setup tools or fax setting in the printer control panel.1. Click the wrench icon on the control panel of the printer.
    2. Scroll to Tools.
    3. Scroll to Time and date.

  • HT202157 How can I set time and date in the Apple TV???  This step doesn't let me go on with installing itunes!

    The area is set for San Juan, PR, but it doesn't recognize the date and time.

    This indicates a network issue.  Ensure DNS settings are set to Automatic and the regional settings are correct.

  • How long should setting time and dates take?

    I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
    How long should it take?

    You have a network problme.  ATV is not able to connect to the internet, so it is not able to set it's date and time.

  • KDE: Setting time and date automatically

    I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?

    matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
    Have you set ntp correctly?
    Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
    in short try this:
    ntpq -p
    If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array.

  • Unable to set time and date

    im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
    what can i do?
    HELP!

    Hello john.george,
    You may need to verify that TCP port 123 is open and available for use on your router.
    TCP port 123 is used to communicate with a network time server.
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Cheers,
    Allen

  • HT1600 I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    I have an apple tv  about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?

    If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-

  • I'm in the activation process for setting time and date but been stuck in that screen for a while please help

    just installed my Apple TV and it's been in the activation screen to set time and date for a while .
    not sure what the issue is

    It's not properly connected to the network
    Make sure location is set correctly
    DNS should be on auto (settings - general - network)
    If on wifi try Ethernet
    Check that router has port 123 open (refer to manual if unsure)

  • Constantly being asked to set time and date (Apple TV 2nd Gen)

    I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
    Thanks!!

    what if you try something simple as to restart your phone and check again. 
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Unable to reset time and date after a software upgrade

    unable to reset the time and date after a software upgrade on the TV

    hello
    I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
    Can anyone help with this?
    Thanks!

  • Nokia 6230i forgetting time and date after 1sec ba...

    Im used to that my 6230i and other nokia phones remember time and date after a sim card switch. The 6230i has now however started to forget time and date after sim card switch or just 1 sec battery removal.
    What is the problem and how can it be fixed?
    Thanks

    Hi heraldo
    There is I think a capacitor used to hold sufficient charge and this may now have failed. Entry level Nokia phones no longer retain time and date at all if battery removed.
    Is your phone still under warranty?
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • HT4623 I don't have a update software in my general settings G3 phone and can't get past up date 4.2.1 using itunes all I want is to download the free skype app

    I don't have a update software in my general settings G3 phone and can't get past up date 4.2.1 using itunes all I want is to download the free skype app

    iOS 4.2.1 is the latest for the iPhone 3G.

  • Setting time and date on Apple tv

    After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
    manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
    no luck

    Setting date and time

  • Set time and date not working

    Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!

    You need to set your location to where you are, not where you might like to be.

Maybe you are looking for

  • Why is my Bluetooth no longer pairing with my iPhone 5?

    Why is my bt not pairing with my iPhone 5? I've tried everything,but nothing works.

  • Pdfs created on my iMac add hidden carriage returns after each word

    Hello Community, This problem exists on my iMac but not my wife's Powerbook. Whenever I created a pdf from Preview by printing and then selecting "save as pdf" I got a lovely looking pdf which I could send to anyone and they could view just fine.  Ho

  • Time out for DBAdapter

    Hi, I have to handle DB time out in bpel when database is not responding within 4 seconds. How can i perform this db time out? Please suggest any useful information and kindly explain in details. Thanks in Advance Edited by: 997123 on 09-May-2013 06:

  • How to integrate OM with PA

    Hi All, I creat the OM Structure and now i want to integrate OM to PA and i know that we integrate these with help of PLOGI, but i dont know to configer PLOGI and where it is in IMG or in End user screen. and currently iam working on version 6, in th

  • Ext3fs file system access on Sparc SCSI disk

    We've got a requirement to read data from a SCSI disk with an ext3fs file system which will be connected to a SunBlade system. Write capability would be a bonus. We've found some old (and not working) implementations to allow Solaris to mount and rea