Why my Canon mvi video play back is fuzzy?

What OS are your other machines using? Trying to find out if this is an OS difference problem.

Similar Messages

Why does my Flash Player keep freezing during video play back?

I have the very lastest version for Windows 7 64bit OS and it keeps freezing during video play back. The previous versions did not do this. I have to keep the cursor moving inside the video window to prevent the player freezing. I have deslected HARDWARE ACCELERATION and it does not help. Why is this happening and how do I correct this situation?

Right click ANY Flash content and choose "Setings".
Click the folder icon (center tab) and increase the storage to at least 10Mb.

Captured video plays back fast (sped up) in Final Cut Express 4

I had a Panasonic mini-dv digital camera that was stolen and it worked great with FCE. I purchased a JVC GR-D870 (mini-dv) as a replacement and now in FCE when I capture video it plays back fast in the Viewer and if I open the .mov file in Quicktime. Note that the video plays back at the correct speed when played from the camera, and when the video is being captured. I've tried changing my Easy Setup, but nothing has helped much. I'm currently using the DV-NTSC FireWire Basic setting, though it doesn't matter which one I chose. I did try using the 25.00 fps DV-PAL setting and interestingly it will capture for about 2 seconds and then crash, but the 2 second clip I'm left with seems to playback at the normal speed. This is an NTSC camera so not sure how to get the video that I capture to play at the correct speed (frame rate?). Any help would be most appreciated.
Message was edited by: jbrumleve

Never heard this one before!
I have no idea why it is playing back fast, but if you have an NTSC camera you must use an NTSC Easy Setup.
When FCE behaves strangely the first thing to try is to delete the preferences as described here:-
http://www.fcpbook.com/Misc1.html

Video play back in FCP X is choppy, does anyone know how to fix this??

video play back in FCP X is choppy, does anyone know how to fix this??

So I just tested it and the badge icon does appear to update, but it takes a minute or two. Does anyone know why it takes so long? All of my other app badges seem to update almost immediately.

Is it possible to change brightness in video play back?

Is it possible to change brightness in video play back, without having to go to settings?
If not, then who agrees this should be possible?
I’m sure most iphone users have the stock brightness setting set to low to save battery power, but it’s very irritating when you go to watch a video in bright lighting conditions and in order to see it properly you have to go back out and change it.
I am not computer programmer, but I’m sure it would be possible to have a slider (just like the volume) and could be introduced in a update.
I think it would improve the overall iphone experience just that little bit more.
What do you think?

All Help > System Info does is to report your system specifications so you can copy and paste them in the forums for troubleshooting purposes.
You can choose what to highlight and copy, but it does not change anything in your system like editing a configuration file would.

Webcam video plays back super fast speed

hi, does anyone know about this: when i record video from my creative Live! Cam Video IM Pro, the play back is like twice the speed of real life. like a video speeded up. it was working fine on my previous computer, which was windos xp, and i upgraded to a newer computer with windows vista 64 bit, and now the video play back is too fast. i also tried viewing the video on other viewers like windows media and VLC, still too fast.

Hi David,
I think we may be able to say more if you can tell us more about the rest of your code. What sort of structures are you using, and where are you dropping your AVI Capture code in? Is the video sped up on your front panel or when you play the resulting file?
You should post the larger piece of code if possible.
Cheers,
Andrew C.
Applications Engineer
National Instruments

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content.

Why won't my videos play? They start on the device that they are on, then stop and I get an error message...An error occured loading this content. This comes up on all of my computers. I reset the Apple TV to Factory Settings and still get the same message.

Hi There,
I had the same problem took me several hours to try and sort it out but nothing worked.
I then went to the following apple link
http://support.apple.com/kb/TS5376
Follow everything to a T and you will get the use of your Itunes again.
Hope this helps. Good luck (And remember to breath lol )

Why wont embedded youtube videos play on ipad

why wont embedded youtube videos play on ipad

Hi..
Try troubleshooting the Flash plugin which is required for most YouTube cotent as well as other sites.
Quit Safari.
Open System Preferences > Flash Player then select the Storage tab. Click: Delete All
Now uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall first.
Launch Safari From your Safari menu bar click Safari > Empty Cache
Now try a video.
BTW... if you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.

Video play back choppy

The video play back is very choppy on itunes. I have read two trouble shooting topics about video play back but I don't understand them. I have vista. Do any of you have any ideas? Is the any phone or online support for itunes? I can't find any links tech support.

Hello @GSW1964,
I understand that you are getting choppy video playback on your HP Pavilion Slimline s7410n Desktop PC running Windows 7. What type of video are we talking about here live streaming? What steps have you taken? Have you tried turning off hardware acceleration?
Please re-post with as much information as possible and I will be happy to assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Facebook videos play back without sound

When I click on a video within Facebook, the video plays back without audio.
I have a 16gb iPad with retina display.
This happens on all videos within
Facebook and continues despite several updates to Facebook.
I am running iOS 7.0.4
Help please

Hello acarrejo,
It sounds like the Facebook app on your iPad is not playing audio. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

Canvas window - video plays back at different speeds from the timeline. Why

I've scanned 25 pages of topics but found nothing that mentioned this as a problem. When I play a sequence in the timeline, the video in the Canvas window slows down (and sometimes suddenly speeds up to catch up with the audio) About the audio, it sounds find regardless of how the video is playing back. if I hit the space bar to stop play back, the video snaps to the correct position.
Any ideas why?
Sometthings I've noticed : If I restart my computer, the video tends to play back fine. But if I leave the program open and use it alot, the play back problem happens over time. If I make the canvas window tiny (25% size), the video plays fine but at 50% - I get video speed changes. (audio, always good)
Here is what Im using : The project is about 20 mins long. I have over 50 gigs of HD space (the Macs main drive) Im using FCP version 4.5 on a Dual G5. 2.5 GB of Ram.
Well thanks to any one who respones.

When I play a sequence in the timeline, the video in the Canvas window slows down (and sometimes suddenly speeds up to catch up with the audio) About the audio, it sounds find regardless of how the video is playing back. if I hit the space bar to stop play back, the video snaps to the correct position.
Does this happen in any other sequences within this FCP project? Or, for that matter, with any other projects on your FCP system?
And, to confirm, your media is running off your system drive? That is, your machine has only one hard drive on it, correct? (Partitioned or not)

CS4: Why do I have Lag on only 1920 1080 video play back??

Hi,
I currently record with a Sanyo Xacti HD2000, at 1920x1080 30fps SHQ resolution. Whenever I play the clips on the camera or Nero Essential 8 on my computer there is no lag problems. However the moment I upload a clip onto Premiere Pro CS4 with this resolution I have severe lag on the play back from the Premiere video screen. I've recorded on 1280x 720 and 640x480 on the camera too and the play back is completley fine with no lag what so ever, just the moment Full HD clips are imported do I get any lag. I don't think it's because my computer can't handle it either as it has in it Core 2 Duo processor, 3GB of Ram and an Overclocked 1GB Geforce 8600 GTS Graphics Card. The only thing I'm not sure about is what Presets I should be using for my footage as this might be the problem.
If ANYONE can help I'd seriously appreciate it, you can email me a [email protected] If you want to further questions about anything you may feel may help you guys helping me or just to communicate to me faster;
Thank you sooo much!!!

Hi,
I dont think the gpu of your graphics overclocked card is used at all in the cs4 environment...thats more for gaming stuff.
so you can rule that out as a "plus"
The 3 gig ram is kinda anemic...low power...every gig helps...so 4 would be better...think about it...the OS alone uses a lot of ram..
the power requirements that adobe says you need to run the program is on the low end of requirements...and you are maxing things out playing with real high HD stuff.
everything else is a question of how you set up your hard drives and raid array and so on to deal with editing in general ( there are hardware threads about how to set that up best....scratch disk and so on...cache...)
plus you might have a red bar above your timeline indicating it should be "rendered" for smoother playback...and that has an effect too.

When I chose the GPU Acceleration on my general settings I only get audio and not video play back

It has been extremely frustrating for me because my computer can render files fast just couldn't read the graphics card I had so I had to unlock it. I am hoping someone on here has done something similar to help me get this to work because the only thing that I am having trouble with as far as when it is on software only is on play back. I kept dropping several frames and it was really frustrating me. I think I may have found why I am having this problem and hope someone on here can help me out.
15. Now just add the name of the card between the “Renderer string:” and the forward slash “/” to the cuda_supported_cards.txt file.
This was on of the steps that I did not understand and could be the reason why it is not working properly because I did not know how to do this.
Like I said it is letting me switch to the GPU Acceleration mode just not letting me see any video on anything in cs6.
This is the link to where I learned how to get premiere cs6 to read my graphics card http://www.studio1productions.com/Articles/PremiereCS5-2.htm
I have a GeForce GT 525M graphics card and according to that site I can get premiere to read my graphics card to help me playback without dropping frames.
I also installed the latest driver so that can not be the issue as of now. If you know the answer please help this is very frustrating.
Thanks!

See http://www.nvidia.com/Download/index.aspx

Importing MVI videos play on Ipad but not thru iTunes

I have used the import function to load photos/videos from a Canon G12 to view the results on the iPad. The videos are MVI format. All the files play fine on the iPad by going to the "All Imported" tab under photos. Including the videos! But if I try and load the same videos with no change in format going through iTunes either in the "Photos" tab or the "Movies" tab I get the file format error and they won't load.
So is the only way to load via iTunes is to convert the files to an MP4 format? Like HandBrake?
I guess I could continue to load them using the import photos path. I have been successful using a drive connected to the Apple adapter with the root file name DCIM.
Thanks
Mark

Maybe he means the copy protection has not been removed. But what would explain the video plays on the iPad?
Basically, the difference would how AirPlay (and how your TV) handles copy protected material.

Video playing back choppy even in Source window

I've been working on a project for a while and wanted to back it up to a hard drive. We have an internal hard drive bay so I shut the computer down, put in a 500GB hard drive, backed up the project, shut the computer down and removed the hard drive.
Now, all of the sudden, my footage is playing back choppy. I probably shouldn't say it's playing back choppy because what happens is I'll take a raw clip, load it into the Source window start it playing and it plays fine for about 8 seconds, then it starts stuttering, the audio drops out completely and then it completely freezes up. It doesn't seem to matter what clip I'm using and all of these clips used to play back fine.
We are using a Matrox RT.X2 card and the footage is on four 500GB hard drives that are in a RAID 5 array, so I have a total of 1.5TB of space. Would defraging the drives make a difference?
I'm not sure why this has just started when nothing was added or taken away from the project.
The computer's specs are as follows:
Win XP Pro
2.66Ghz Core2 Quad
4GB Ram
GeForce 7600GT
Matrox RT.X2 Card
300GB SATA HD for Operating System
4x 500GB SATA HDs in RAID 5 array for Footage

According to the Intel Matrix Storage Console (which is the software that monitors and controls the RAID array on this motherboard, an Intel D975XBX2), the raid is working properly and is not being rebuilt.
To check and make sure the software was working properly I shut down the computer, unplugged one of the hard drives in the array and restarted the computer. The monitoring software reported that the array was missing a hard drive.
I have seen before when the array was being rebuilt. It will state this in the monitoring software. But the software is reporting all is well.
So I backed up everything and deleted the RAID array. I recreated the RAID array and was still getting the same problem. To test every time, I have a 900MB file that only takes about 20 seconds to transfer between two single SATA hard drives in the same computer. When I tried copying this to the RAID array it said it was going to take about 30-40 minutes!
I removed my boot drive and put in a spare that we had, formatted it and installed Windows XP, hoping that the problem was in the operating system. After installing the mobo drivers I tried copying the 900MB file and again it was going to take 30-40 minutes.
I deleted the RAID array and just made each of the 4 500GB hard drives a separate drive. I formatted each of them and tried copying the 900MB file to each. Each one of them only took about 20 seconds on their own to copy the file.
SO, I'm assuming that the problem is the RAID controller on the motherboard. The motherboard has an Intel ICH7R/DH SATA RAID controller. I purchased a Rosewill RC-209-EX PCI controller from Newegg.com and I'm really hoping this will fix my problems. I'm having it overnighted (which costs more than the controller itself) so I'll put it in tomorrow.
If anyone has any other suggestions, please let me know.

Why my Canon mvi video play back is fuzzy?

Similar Messages

Maybe you are looking for