Why My Compter does not start?

It switch es on web i presse thé button. Thé screen is grey. The black apple appears in thé middle of thé screen. The searching sign keeps turning.

It would seem that elements of the startup are failing to be read. Try booting to your Recovery Partition or Restore disk (depending on your version of OS X), and running Disk Utility to repair permissions and verify disk, on your main startup drive. If Verify Disk shows errors, try to run Repair Disk to correct them. Failing all of these, your main drive could have hardware issues in need of hands-on service, by an authorized Service Provider.
To boot to your Recovery Partion in Lion or Mountain Lion, hold down the OPTION key while booting, and then select the Recovery Partition from the group of drives that show up in Starup Manager.

Similar Messages

  • I don't understand why my iBook does not start on my macbook?

    Whenever I click on iBook or Preview or Dictionary on my macbook, the app won't start.

    I Did what you said, but all these massages appeared simultaneously !
    ​7/9/14 11:43:07.672 PM MTLAgent[212]: Injecting MTL into com.apple.finder...
    7/9/14 11:43:07.688 PM iBooks[704]: Unable to load nib file: MainMenu, exiting
    7/9/14 11:43:07.692 PM com.apple.launchd.peruser.501[142]: (com.apple.iBooksX.34352[704]) Exited with code: 1
    7/9/14 11:43:07.716 PM MTLAgent[212]: Injecting MTL into com.apple.loginwindow...
    7/9/14 11:43:07.716 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/loginwindow.app; it may not be scriptable.
    7/9/14 11:43:07.717 PM MTLAgent[212]: Injecting MTL into com.apple.systemuiserver...
    7/9/14 11:43:07.718 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/SystemUIServer.app; it may not be scriptable.
    7/9/14 11:43:07.719 PM MTLAgent[212]: MT is already loaded into com.apple.iBooksX
    7/9/14 11:43:07.721 PM MTLAgent[212]: Injecting MTL into com.apple.finder...
    7/9/14 11:43:07.756 PM MTLAgent[212]: Injecting MTL into com.apple.loginwindow...
    7/9/14 11:43:07.757 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/loginwindow.app; it maynot be scriptable.
    7/9/14 11:43:07.757 PM MTLAgent[212]: Injecting MTL into com.apple.systemuiserver...
    7/9/14 11:43:07.758 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/SystemUIServer.app; it may not be scriptable.
    7/9/14 11:43:07.760 PM MTLAgent[212]: Injecting MTL into com.apple.finder...
    7/9/14 11:43:07.782 PM MTLAgent[212]: Injecting MTL into com.apple.loginwindow...
    7/9/14 11:43:07.783 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/loginwindow.app; it may not be scriptable.
    7/9/14 11:43:07.783 PM MTLAgent[212]: Injecting MTL into com.apple.systemuiserver...
    7/9/14 11:43:07.784 PM MTLAgent[212]: warning: failed to get scripting definition from /System/Library/CoreServices/SystemUIServer.app; it may not be scriptable.
    7/9/14 11:43:07.784 PM MTLAgent[212]: Injecting MTL into com.apple.Console...
    7/9/14 11:43:07.785 PM MTLAgent[212]: warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.
    7/9/14 11:43:07.975 PM com.apple.launchd.peruser.501[142]: (com.apple.FolderActions.folders) Throttling respawn: Will start in 6 seconds

  • JControl.exe does not start...Database Initialisation Problem...MS SQL

    Hi,
    I was wondering if anyone has any idea on why JCONTROL.exe does not start. I am currently installing NW04s EP7. The DB is on another host and te SCS and CI are on a different host. I am going throught the installation when I get the following error fro the Bootstrap file.
    I have already done the following steps:
    1. entered the SAP<SID>DB password
    2. SQL is started and running on the second host.
    3. The bootstrap.propeties files look the same as any other file EP system on our network
    [Mar 7, 2007 5:32:35 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:45 PM  ] Bootstrap MODE:
    [Mar 7, 2007 5:35:45 PM  ] <INSTANCE GLOBALS>
    [Mar 7, 2007 5:35:45 PM  ]  determined by parameter [ID0117060].
    [Mar 7, 2007 5:35:45 PM  ] -
    [Mar 7, 2007 5:35:46 PM  ] Exception occurred:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:212)
         at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
         at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:60)
         at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:419)
         at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
         at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    [Mar 7, 2007 5:35:46 PM  ] [Bootstrap module]> Problem occurred while performing synchronization.
    Many thanks,
    Adil Zafar

    ==[ Caused by: ]==----
    com.sap.engine.frame.core.configuration.ConfigurationException: Error occurred: Secure Store lib Dir does not exist
    PC04315\sapmnt\ET1\SYS\global\security\lib\tools
    Do you have strong encryption on your current system?

  • -Xmx greater than 180M does not start jvm on a 2gb machine, why?

    Hi, we have developed a product demo shown as an applet that uses the java plug-in to startup.
    The demo requires high amount of memory so we modified the java plug-in -xms and -xmx values in the control panel so more memory is available to the applet. What we can not see is why using values higher than -Xmx187M the applet does not start launching an error message either in Explorer of Firefox telling it has been unable to load the jvm. Using the value of -Xmx180M the applet starts but the out of memory message is displayed very soon as the demo requires at least 700M.
    We are using:
    � JRE1.6_u02
    � IE7. FireFox 2.0.0.7
    � Computer: 2GB Ram, CoreDuo2.
    Does any of you why this limitation in the maximum java heap size?
    Thanks for your time and help.
    Best Regards.

    I don't understand the logic for when it will error out on the -Xmx setting.One obvious idea leaps to my mind - because windows doesn't do it.
    And googling would seem to support that. Search for "currently implemented up to" in the following.
    [http://support.microsoft.com/kb/294418]

  • When downloading Mac OS X 10 it says that my hard drive does not start up my computer, Why does it do this

    When I was downlaoding Lion  the downlaoding app says that my hardrive does not start up my computer, Why is this and What should I do?

    Run disk utility on your hard drive to verify/repair it also repair your permissions. 

  • Why is my downloaded Lightroom CC (2015) does not start? The download is successful otherwise okay. The shortcut appears on the desktop etc. But the program does not start.

    Why is my downloaded Lightroom CC (2015) does not start? The download is successful otherwise okay. The shortcut appears on the desktop etc. But the program does not start.

    Thank you help ! [?]
    2015-04-29 19:58 GMT+02:00 kglad <[email protected]>:
        Why is my downloaded Lightroom CC (2015) does not start? The download
    is successful otherwise okay. The shortcut appears on the desktop etc. But
    the program does not start.  created by kglad
    <https://forums.adobe.com/people/kglad> in *Creative Cloud Download &
    Install* - View the full discussion
    <https://forums.adobe.com/message/7495290#7495290>

  • My iPod does not start, i dont know why !!!

    Hi first. I'm glad to be here.
    My iPod 60GB Video, does not start. I have try many methods to start it but its not starting. I was changin themes in iPod and its turned off, and doesn't start anytime. Have anyone any answer ( answer which can help me ) for my problem.
    c-ya

    Have you tried all of the suggestions from these articles?:
    iPod won't turn on
    iPod stops responding or won't wake from sleep
    iPod: No power or frozen
    -Kylene

  • Why windows 8 does not recognize ipod touch model A1367 4th Generation?

    Why window 8 does not recognize ipod touch model A1367 4th generation?  and of course iTunes either.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (it applies to win 8)
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Can not update tiger and safari does not start

    Hi everybody,
    I have actually two but probably interrelated problems: First, safari does not start and second, I can not update tiger.
    It all started a few days ago on my MacBook (Intel). Somehow, Safari produced an error (I only guess that it was Safari because I was downloading a movie clip) and Tiger was frozen. After rebooting, the whole system had problems (e.g., Safari and Skype were not starting). I tried to reinstall and archive mac os x but with no success. The problems were growing actually even worse (e.g., slow) and at some point in time, Tiger was not even starting. Thus, I did a full new installation of 10.4.8 (delete and install). Afterwards, it worked first but after the automatic software update, the system told me that their was an input/output error (???) during the 10.4.10 update. Afterwards, the whole system had again problems (slow and problems with even booting)!! Thus, the software update made it even worse. So, I did again a full installation (delete and install).
    I have to update my 10.4.8 system, because I also have iLife08 that needs at least 10.4.9. However, I don't know what to do to avoid again these update problems??
    In addition, despite the full installation, Safari is not starting. Thus, there is still some problems but I have now clue where this comes from as it is newly installed?!
    Any ideas?? Thanks...
    Crobus

    Crobus, welcome, since you are starting from scratch with each re-install why not try Kappy's Extended Hard Drive Preparation.
    http://discussions.apple.com/thread.jspa?messageID=5203987&#5203987
    Do all steps from 1 thru 6, it is by far a more maintenance oriented than an Erase and Install. After the preparation, install OS 10 from your DVD, then download the OS 10.4.10 Combo Updater.
    Joe

  • Photoshop does not start unless I reboot

    I have been having this problem since yesterday. Photoshop does not start after I use the computer for a while. I opened Windows Task manager to see if any processes start at all, even though the application does not start. Two processes (1) AdobeIPCBroker and (2) Photoshop.exe process start, but photoshop application does not open , not does it show up in the applications. What may be going wrong?
    Arun

    domike wrote:useradd someuser ; mkdir -p /home/someuser ; chown someuser:someuser /home/someuser
    Where did you get this idea?  This is the problem.
    Follow the wiki
    Also, you realize everything you are installing and doing only remains in memory.  Why are you installing all these packages?  Are you going to repeat this installation and user creation at every reboot?
    EDIT: something else is wrong too - but until you fix the above, it will be hard to know if it is a separate cause, or an indirect effect.  /run/user/0 should not be relevant, but /run/user/1000 should be used.  I suspect your method of starting X is logging out of the 'su'ed user and is dropping back to the root login that it is under.  You'll likely need to change tty's to log in as your user - on a normal system you could log out of the root session and back in as your user - but on the iso I think autologin for root is set on tty1.  Of course you could disable this too.
    Last edited by Trilby (2014-05-28 11:44:42)

  • PE 9 does not start on Windows 7 Ultimate 32 bit

    No matter how I try to start PE 9, it does not start.
    From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
    That's all, no error log or something like this. Please let me know what info is needed.
    PS: Why does my cursor jump to the beginning when I press enter in text editor here?

    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
    parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
    this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
    editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
    (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
    drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
    the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
    type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
    http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
    eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
    disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • BADI FILTER_F4_ADHOC_AGENT does not start

    Hello,
    I have the following problem. I want to manipulate the search result when adding a new approver.
    The Problem is that the method FILTER_F4_ADHOC_AGENTS build in with BADI does not start. My breakpoint in there is useless.
    On the other hand the method CHECK_INPUT_ADHOC_AGENT runs well. My breakpoints stop in there.
    Now my questions: Where is the call of the method FILTER_F4_ADHOC_AGENTS? And why does not my breakpoint stop there?
    Thanks for any answers.
    Edited by: Rico Scharm on Apr 7, 2010 8:17 PM

    I solved the problem by debugging the search help i found after hours.
    The problem is, I maintained a filter to BUS2121 as usual for the other workflow badis. But when the search help is looking for badis it got no object type. After realizing this I left the badi implementation without any filter. Now it my implementation is triggered.

  • CiscoWorks Tomcat Servlet Engine service does not start

    Hello!
    CiscoWorks  Tomcat Servlet Engine service does not start.
    Events in the Windows Event Viewer:
    The CiscoWorks Tomcat Servlet Engine service terminated unexpectedly. It has done this 1 time(s).
    output pdshow and file stderr.log,  hs_err_pid2128.log attached.
    Do  you have an idea how to resolve this?
    Thanks!

    The only things which I see are wrong are the start types for the IPM NG database engine and HUM database engine services.  They must be set to Manual, not Automatic.  However, that would not account for the Tomcat crash.  The crash points to an error in the code which processes regdaemon.xml, but I see no reason why that should be failing.  As I said before, I think it would be best to open a Service Request.  Remote access would be helpful to dig into this problem in more detail.
    Please support CSC Helps Haiti
    https://supportforums.cisco.com/docs/DOC-8895
    https://supportforums.cisco.com

  • Opmn does not start all processs when server ( windows 2003 is rebooted ).

    There is a startup script which starts every process when run from cmd. But when the server is rebooted it does not start Portal, WebCache.
    The startup Script :
    @ECHO OFF
    REM ---------------------------------------------
    REM 10gAS Rel 2 Midtier startup script
    REM ---------------------------------------------
    date /t
    time /t
    REM ----------------------------------
    REM Set Oracle Home
    REm -----------------------------------
    set ORACLE_HOME=d:\Oracle\Ora10gMid
    set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\dcm\bin;%ORACLE_HOME%\opmn\bin;%PATH%;
    REM ----------------------------------
    REM startup ProcessManager (OPMN)
    REM ----------------------------------
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startall
    call %ORACLE_HOME%\opmn\bin\opmnctl start
    call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=WebCache
    call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=OC4J
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=WebCacheAdmin
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=home
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=OC4J_BI_Forms
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=OC4J_Portal
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=HTTP_Server
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=Discoverer
    ======================================================
    I tried starting each process type individually and it does not start OC4J and WebCache components. This does not work only during reboot.
    Thanks in advance for our valuable suggestions
    v

    no bat file is needed for opmn to startall on service restart or system reboot. Opmn remembers the state of the services on a clean shutdown of the service & will bring it back. So just do a opmn startall, then restart the Oracle<OraHome>ProcessManager service & check using opmn status. All services should be in the same state as before the Oracle<OraHome>ProcessManager was restarted.
    where/why are you trying to use a bat file to stopall/startall? It can be done via a script, but the user that starts the bat file MUST be the same user that installed OAS/OID.

  • SSH does not start after reboot

    Hi, I have a problem with my sshd daemon. I have updated my OS, I have changed the .pacnew files and tested service with "systemctl start sshd.service" and it worked good. I have run command "systemctl enable sshd.service" and command executed good. But after reboot service does not start.
    I have run "systemctl status sshd.service" and result is that service is loaded, but in Activa line it is inactive (dead).
    I dont know what is happening, why is it inactive if it is loaded?
    Thank you for you help.

    These are outputs:
    $ systemctl status sshd.service
    * sshd.service -OpenSSH Daemon
    Loaded: loaded (/usr/lib/systemd/system/ssh.service: enabled)
    Active: inactive (dead)
    $ systemctl status sshd.socket
    * sshd.socket
    Loaded: loaded (/usr/lib/systemd/system/ssh.socket: enabled)
    Active: active (listening) since Fri 2014-05-30 09:57:52 COT; 12min ago
    Listen: [::]:22 (Stream)
    Accepted: 0; Connected: 0
    It looks that socket is working, but service isn't. I have reviewed "journalctl -b" and sshd service isn't shown it.
    Last edited by mams827 (2014-05-30 15:25:18)

Maybe you are looking for