Why my costumized settings change back to default, when i close the browser?

I keep trying to customize that the browser open the windows and tabs from the last time and that before downloading something to ask me before and i save all this, but when i close it and open it again, the settings get to the default mode, meaning i get the home page instead of all the tabs i was having, and also the downloads get into the C: Downloads instead asking me where i want to save them. How can i fix this? I have the last version of Firefox (18.0.1).

Have you checked out this article: [[How to fix preferences that won't save]]. Note: I would save the Reset step until after you have tried some of the specific things.
By the way, if you are using any sandboxing or virtual machine software to run Firefox, this may require a different approach.

Similar Messages

When I customize things like homepage, privacy, history they all change back to Firefox default when I close the browser

Firefox will not remember my customized options. I set my homepage and privacy options and when I close the browser and reopen, it will be back to Firefox default homepage.

Sounds like you could have a locked or corrupt preferences file. Try this article for steps to fix that - [[Preferences are not saved]].

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is till empty. I imagine that the backup contains some corruption

Camera roll empty but shows 6.1 gb. Restored to original settings after backing up. When I restored the backup camera roll still shows 6.1 gb and is still empty. I imagine that the backup contains some corruption

Hi cfgolf,
Thanks for contacting Apple Support Communities. I agree with your assessment that something is going on with that previous backup. If you restored from that backup and the issue continues, I would recommend restoring and Set up as new. Before you restore, make sure you Transfer content so that you can sync it back after setting up as new. The instructions on how to Transfer content and Set up as new are both listed in this article.
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
2. Transfer content
Before you erase your device, take a few minutes to transfer your content from your device to your computer to ensure that all your critical data is safe.
6. Set up as new
Complete the setup assistant. When prompted to set up your device, select Set Up as New iPhone and tap Next to continue.
Skip the Apple ID sign-in, in case the original issue was related to any of your content on iCloud.
Note: After setting up as new, you will need to enter the Visual Voicemail password for iPhone (on carriers that support Visual Voicemail). If you've forgotten the password, contact your carrier to help you reset it.
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
If the issue is now resolved, sync one type of content at a time back to the device. For example, if you had an issue playing music, add songs from iTunes and confirm they will play. If your contacts weren't loading successfully, add the contacts back. After each sync, test to see if the issue has returned.
Cheers,
-Joe

We have non admin users on Windows 7. They change the homepage and it works for that session. When they close the browser, and restart it again the default homepage is shown.

Windows 7 Sp3. Using Firefox 7.01
Non admin users.
Can change homepage to whatever they like and it will work.
BUT when they close firefox and open it again the home page goes back to default setting

Update.
This looks to be a mozilla.cfg setting. If I take out the pref("browser.startup.homepage","ourwebpage");
it loads the basic firefox "FirstPage"
How do I get around adding a default homepage that can be changed by the user?
I have tried adding
defaultPref.. .. then the webpage info.. BUT it retrurns a Failed to read the configuration file. Please contact your system administrator.
Do I need to create a prefs.js file?
And if I do how do I get it to work for each new user that logs into that machine?

I can't delete add on bar. I can only temporarly hide it. When I close the browser, then come back and open browser later, the add on bar is back again. This started right after version 11 ato uploaded to my PC. I use Windows XP, Service Pack 3.

I can't delete add on bar. I can only temporary hide it. When I close and open later, the add on bar is back. I have to delete by checking off each time I open Firefox 11. Previous versions "remembered" my original settings.

Thank you. I have been using the Fox die (Graphite) 10.3 theme for about 4 years. In all previous versions of Firefox, had no problem. When I customized the settings, Firefox remembered these settings. I like to run browser with the absolute minimum of bars, so that I have maximum view of web pages.I have had no recent add on's in over a year. When Firefox uploaded automatically recently, that's when this problem started. Now it takes 4 clicks every time I log on to Firefox to delete add on bar. Firefox won't remember the previous setting. I honestly think the bug is with the new version, being the latest.
I don't know how to start in safe mode.

Synaptics Touchpad Tap Scroll settings changed back to defaults on every reboot. Windows 10

After the Windows 10 upgrade my Synaptics Touchpad setings seem to be reset to factory defaults on every reboot. I go in and change to deselect Tap and Scroll gesture options, save, and everything works as expected. If I reboot my pc... all of my changes are erased. I go to Start >Settings > Mouse and Touchpad > Additional Mouse Options > Device Settings > Settings Right after boot: MultiFinger Gestures (selected) Scrolling (deselected) Tapping (selected) Buttons (selected) After change manually and saved:
MultiFinger Gestures (deselected) Scrolling (deselected) Tapping (deselected) Buttons (selected) Rebooted again... and back to initial defaults (Arg!!!) Can anyone suggest a fix?

Hello! I just wanted to share a solution to this issue. I've been having this issue ever since I started the Windows 10 insider program so it's sad that Microsoft didn't fix it before release. Anyway let's get started! The first thing you will want to do is uninstall the Synaptics Driver. Right click on the start button and click programs and features. Find the Synaptics Pointing Device Driver and uninstall it. You will eventually need to restart your PC but do not do that yet otherwise it will just reinstall itself. Next your going to want to Hide the update from Windows Update. To do this on Windows 10 you need to download a tool which can be found here. https://support.microsoft.com/en-us/kb/3073930 Run the tool it will begin detecting problems and searching for updates. You will get two options, Hide Updates or Show hidden updates. Click on Hide updates and on the list you will see the Synaptics Driver, place a checkmark on it and then click next. Let the wizard finish and you've successfully hidden the Synaptics pointing device driver. Next open settings and click on Update & security, click recovery on your left, and then click restart now under advanced startup. Next click on troubleshoot. Then at the choose an option screen, click advanced options, click on startup settings, and click restart. Once your computer restarts you'll see startup settings. Press the number 7 to disable driver signature enforcement. Your computer will now boot up. Login and open your web browser and go to this link http://www.synaptics.com/en/drivers.php Download the latest synaptic's driver for Windows 8 and install it. Once installed, you maybe prompted to reboot so go ahead and reboot the computer. After that, go into your mouse settings and configure your touchpad to your liking. You will not have to worry about losing your settings after restarting the pc anymore. I suggest keeping the tool that allows you to hide or show hidden updates as it is quite handy.
Summary:
1.) Uninstall the Synaptics Driver
2.) Hide the Driver Update for Synaptics using this tool: https://support.microsoft.com/en-us/kb/3073930
3.) Go to Settings, Update & security, recovery, advanced start [restart now]
4.) Click troubleshoot, advanced options, startup settings [restart now]
5.) Press the number 7 to disable driver signature enforcement
6.) Download the latest synaptic's driver for Windows 8 from the website. http://www.synaptics.com/en/drivers.php
7.) Reboot the computer if necessary.
8.) Configure your mouse settings to your liking.

I will change the settings to enable cookies but when i close the options window even though I hit ok the changes I make are not saved

I need to use an ebook online but whenever I try opening it nothing happens, I emailed their tech support and they said I needed to enable cookies. I followed the instructions on your website and when I hit ok and closed the options tab nothing changed, when I reopened it they had been reset to their previous standards, how do I fix this

See:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

Why does the Welcome to firefox tab open with my google tab every time I open the browser? And why can't the browser hold any add-ons I downloaded? I loose then when I close the browser, even tool bars have to be reinstalled every time I open the browser

Every time I open the browser the Welcome to Firefox tab is the first tab, then a second tab opens and thats my google, then a 3rd tab opens for me to reinstall my toolbar. This has been happening for a good year. Updates have not fixed it. Others have this problem. I did a search for an answer, the question is out there but no answer. Now if I go into add ons and add a background Theme or an extension it all is gone when I exit the browser. When I open the browser again I get all 3 tabs and have to install my toolbar again. I DO NOT want to reinstall as I will loose all my saved data, passwords, bookmarks, everything! I have had this computer for a year, Windows Vista x64 bit. Its not the computer, it's the browser. If you have specific questions e-mail me and I will be more then happy to help

See this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved

Cursor does not change back to default after resize

Hi all,
I have a modal decorated JDialog, in normal situation, i put the cursor on the border, the curosr will change to resize cursor, so i drag it and the dialog is resized, after resized, the cursor should change back to default cursor when i enter the dialog again, but i found that somotimes after several resizes, the cursor fail to change back to default and remain as the resize cursor.

Hi
I think there is nothing so strange to cause the problem so I did not put it before, but if someone can help me I will be thankful.
public class TestFrame extends JPanel
     private static TestFrame testFrame;
     private JFrame frame;
     public static void main(String args[])
          JDialog.setDefaultLookAndFeelDecorated(true);
          testFrame = new TestFrame();
          testFrame.mainImplementation();
     private void mainImplementation()
          JButton jButton = new JButton("Show dialog");
          jButton.addActionListener(new ButtonActionListener());
          add(jButton);
          frame = new JFrame();
          frame.setContentPane(this);
          frame.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
          WindowListener l = new WindowAdapter()
               public void windowClosing(WindowEvent e)
                    System.exit(0);
          frame.addWindowListener(l);
          frame.setBounds(0, 0, 500, 500);
          frame.setTitle("Test");
          frame.show();
     class ButtonActionListener implements ActionListener
          public void actionPerformed(ActionEvent e)
               MyDialog jDialog = new MyDialog(frame);
               jDialog.setVisible(true);
     class MyDialog extends JDialog
          public MyDialog(Frame owner)
               super(owner);
               setModal(true);
               getRootPane().setWindowDecorationStyle(JRootPane.FRAME);
               JLabel label1 = new JLabel("Label1");
               JTextField textField1 = new JTextField();
               textField1.setEnabled(false);
               textField1.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label2 = new JLabel("Label2");
               JTextField textField2 = new JTextField();
               textField2.setEnabled(false);
               textField2.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JLabel label3 = new JLabel("Label3");
               JTextField textField3 = new JTextField();
               textField3.setEnabled(false);
               textField3.setMinimumSize(new Dimension(100, 25));
               textField1.setPreferredSize(new Dimension(200, 25));
               JPanel panel = new JPanel(new GridLayout(3, 2));
               panel.add(label1);
               panel.add(textField1);
               panel.add(label2);
               panel.add(textField2);
               panel.add(label3);
               panel.add(textField3);
               getContentPane().add(panel);
               pack();
}

When i make changers to my firefox settings and i close the browser, the changes are not saved, why?

when i make changes in the options menu like - allow pop ups or never remember history, it works great but when i close the browser, the changes i made are not saved, this never happened on the previous version
i have unistalled firefox4 and reinstalled it but this dows not help

See:
* http://kb.mozillazine.org/Preferences_not_saved

My Reader11.0.07 is showing a dark grey background today. Why? How to change back to the original white.

My Reader11.0.07 is showing a dark grey background today. Why? How to change back to the original white.

I have no idea what you are asking; can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

Why does my form data gets cleared out when clicking on the back button.

Can someone explain why does my form selections get cleared out when clicking on the back button.
I have a JSP page that displays a form with some selections and text boxes. I populate the page and submit the request. The action on the submit call another jsp page, which processes the data and displays the results via a <jsp:include> statement which calls the results page. When clicking on the back button from the results page, it returns me to the form page, but the selections are cleared out.
1. Is there something in my calling of the pages that causes this behavior and can I prevent it?
I notice that the behavior is different when using the IE 6.0 version Netscape 7.1. IE clears the page Netscape 7.1 retains the settings.
If I cannot prevent this behavior does that mean I will have to save the state of the form data. And if I have to save the form data, what would be the easiest method of doing this. I'm a beginner to JSP and Java, but have some ASP experience. I don't understand why the back button in a JSP request clears the form data but a regular HTML page does not can someone explain?
THANKS.

the browser doesn't have to remember what you submitted and fill that back in.
you can't prevent it unless you can ensure a new request to the server in which you can fill the default values in there.

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?

I made the mistake when configuring a external monitor, of changing the mhz to 75. When I close the MBP I now get a black screen on the monitor. How do I change it back?
I have a MacBook Pro with the latest operating system, trying to configure a Gateway flat monitor with vga.
Thanks

Apple menu -> System Preferences -> Displays.
System Preferences can also be found in the Hard drive -> Applications folder.
Resetting the PRAM can help bring displays back to factory settings if you can't find what you need:
http://support.apple.com/kb/ht1379

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

How to get the data from mysql database which is being accessed by a PHP application and process the data locally in adobe air application and finally commit the changes back in to mysql database through the PHP application.

If the data is on a remote server (for example, PHP running on a web server, talking to a MySQL server) then you do this in an AIR application the same way you would do it with any Flex application (or ajax application, if you're building your AIR app in HTML/JS).
That's a broad answer, but in fact there are lots of ways to communicate between Flex and PHP. The most common and best in most cases is to use AMFPHP (http://amfphp.org/) or the new ZEND AMF support in the Zend Framework.
This page is a good starting point for learning about Flex and PHP communication:
http://www.adobe.com/devnet/flex/flex_php.html
Also, in Flash Builder 4 they've added a lot of remote-data-connection functionality, including a lot that's designed for PHP. Take a look at the Flash Builder 4 public beta for more on that: http://labs.adobe.com/technologies/flashbuilder4/

Why my costumized settings change back to default, when i close the browser?

Similar Messages

Maybe you are looking for