Why my FIle sender Communication channel is inactive?

I tried to edit and save it again, but i can see active at ID but inactive at RWB-->Channelmonitorring..
what to do?

May be in the channel monitoring the channel is stopped. If you are sure that the channel is active in ID and in Start mode in communication channel, then it is a cache issue. Then, perform full CPACache refresh.
Regards,
Prateek

Similar Messages

  • File sender Communication Channel is not working

    Hi friends
    we  Created File sender Communication Channel and Activated but It is not picking up file
    1.  0 messages in Message Monitoring
    2. My Communication Channel not appearing in Communication Channel Monitoring also
    3. We have refreshed the cache and activated the channel.
    we chack with File name, Directory name and  path ....
    Friends have any idea
    Regards
       Viswanadh Vadde

    Perosnally, I would recommend setting a trace and letting the system telling you exactly why.
    Traces are used to analyze runtime errors.  By setting a specific trace level for specific locations, you can analyze the behavior of individual code segments at class and method level.  This is done with the help of the log configurator service:
    Log onto the Java Admin Console
         Services
         Log Configurator
         Locations
         Choose the location (Java package) and the tracing level (severity)
    (for example, com.sap.aii.adapter.file)
         Root Location > com > sap > aii > File
         Set the severity and choose Copy Severity to Subtree

  • Why is a sender communication channel not required for IDOC and PROXY ?

    Hello,
    In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
    Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..)  when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
    Though this might be a regular question, I am not able to find a proper reason.
    Please let me know the reason for the above request.
    Thanks & Regards.

    You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
    But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
    Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
    Regards,
    Raj

  • File sender communication channel stop working

    Hi Guru,
    I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
    Thanks,
    Meiying

    Hi,
    option 1--
    Do some dummy changes and activate channel and try and perform cache refresh.
    If still not working then  stop and restart SFTP service,if still no luck then restart JAVA stack
    option 2
    try to put timeout value in the channel.
    Regards.
    Mastan

  • Alert when Sender Communication channel is inactive/down

    Hi,
    Kindly let me know if we can generate an alert using alert configurations/rules when Sender Communication channel is inactive/down.
    Thanks.
    Regards,
    Aditya.

    May be in the channel monitoring the channel is stopped. If you are sure that the channel is active in ID and in Start mode in communication channel, then it is a cache issue. Then, perform full CPACache refresh.
    Regards,
    Prateek

  • FILE SENDER COMMUNICATION CHANNEL DOESN'T GET FILE

    Hi,
    I have create a new sender communication channel with ftp file configuration. Server parameter and source directory are correct.
    I have also checked file and directory permission (chmod 777)
    Poll interval is 600 secs.
    There is no error in communication channel monitor  (returned log: CC is correctly configured and started).
    Process started every poll interval, but no file is picked up.
    Why?
    Carme

    Hi,
    What type of file are you processing. Check whether the file type is binary or text mode.
    Also check whether the file name you have specified in the CC and the exact file in the directory are the same.
    Also check the file processing mode, whether it is read only, delete or in test mode.
    If the file is in read only mode when the file first processed, then once the file was processed it would be in read only mode, so if you place the new file it should process, so try deleting the existing file in the directory and place a new file with exact file name along with the correct extension and try to process it.
    Also I would suggest you check the exact file extension, by unchecking the radio button in the folder option under the menu tools> Folder options> view-->hide extension for file type.
    Regards,
    Nithiyanandam

  • File sender communication channel error

    Hi gurus please help me on the below issue ,suddenly my file(sender)communication channle is showing error status stated below error ,it is just simple scenario like file to proxy upto one hour back it is working fine suddenly it is showing below error plz give me the reply im in production suport
    Error: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during lookup operation of object with name localejbs/ModuleProcessorBean, cannot resolve object reference. [Root exception is javax.naming.NamingException: Error occurs while the EJB Object Factory trying to resolve JNDI reference Reference Class Name: Type: clientAppName Content: sap.com/com.sap.aii.af.app Type: interfaceType Content: local Type: ejb-link Content: ModuleProcessorBean Type: jndi-name Content: ModuleProcessorBean Type: local-home Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocalHome Type: local Content: com.sap.aii.af.lib.mp.processor.ModuleProcessorLocal com.sap.engine.services.ejb3.runtime.impl.refmatcher.EJBResolvingException: Cannot start applicationsap.com/com.sap.aii.af.app; nested exception is: java.rmi.RemoteException: [ERROR CODE DPL.DS.6125] Error occurred while starting application locally and wait.; nested exception is: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5106] The application [sap.com/com.sap.aii.af.app] will not be started, because of the server state is [STARTING]. at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.startApp(DefaultContainerRepository.java:315) at com.sap.engine.services.ejb3.runtime.impl.DefaultContainerRepository.getEnterpriseBeanContainer(DefaultContainerRepository.java:106) at com.sap.engine.services.ejb3.runtime.impl.DefaultRemoteObjectFactory.resolveReference(DefaultRemoteObjectFactory.java:55) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:144) at com.sap.engine.services.ejb3.runtime.impl.EJBObjectFactory.getObjectInstance(EJBObjectFactory.java:63) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl._getObjectInstance(ObjectFactoryBuilderImpl.java:77) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl.access$100(ObjectFactoryBuilderImpl.java:33) at com.sap.engine.system.naming.provider.ObjectFactoryBuilderImpl$DispatchObjectFactory.getObjectInstance(ObjectFactoryBuilderImpl.java:228) at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:283) at com.sap.engine.services.jndi.implclient.ClientContext.lookup(ClientContext.java:394) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:223) at com.sap.engine.services.jndi.implclient.OffsetClientContext.lookup(OffsetClientContext.java:242) at javax.naming.InitialContext.lookup(InitialContext.java:351) at javax.naming.InitialContext.lookup(InitialContext.java:351) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:83) at com.sap.aii.af.lib.util.ejb.FastEjbFactory.createEjbInstance(FastEjbFactory.java:51) at com.sap.aii.adapter.file.File2XI.send(File2XI.java:3451) at com.sap.aii.adapter.file.File2XI.processFileList(File2XI.java:1332) at com.sap.aii.adapter.file.File2XI.invoke(File2XI.java:622) at com.sap.aii.af.lib.scheduler.JobBroker$Worker.run(JobBroker.java:500) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:182) at com.sap.engine.core.thread.impl3.SingleThread.run

    Hi Thank for your reply Nbendu and sorry for late reply .
    My issue was now resolved but i want to know why this is happend i am getting this issue when ever there is any Basis maintaenance Happens.
    If it is due to  Basis maintnance then with same combination we have 2 more interfaces is there it is not affecting the other .
    Any thoughts.
    Regards
    Madhu

  • None of the file Sender Communication Channels are wotking in Prod-Urgent

    facing a wierd situation, since yesterday all of my File Sender Comm Channels have stopped picking up files.This is in Production and was working fine day before.When I check in Comm channel monitoring the Channels are started and Functioning and also shows me that they are polling for the files.But no file is picked though files exist in the directory.These channels have been working fine since months and nothing had been changed since then.Suddenly all of them stopped picking up files.
    I have about 10 Comm Channels that pick files, Is this related to Adapter Engine....any suggestions on this would be really apprecated.
    Thank You.

    Hi!
    Check access rights on your files. Try to set them to 777 (using chmod). Maybe this will help.
    Problem is, when the XI does not have rights for picking up files, you see no errror message in CC monitoring and everything seems to be ok, but it is not..
    We faced the same problem.. And we figured out, that our partner started to upload files with different access rights.
    Peter

  • Problem in File Sender Communication channel

    Dear all,
    We have FIle TO RFC scenario, which have been running in Production since long time.
    Problem :  Many of the time we have obsereved that even if the FTP is up and running , but file is not getting picked from ftp server. File name and all other details are maintained correctly. Can you please suugest me to resolve this issue.
    Regards,
    Raghvendra

    First of all: the connect parameter should be set to 'Per Transfer': this ensures that a new connection to the FTP server is established for each file transfer. That means that you don't loose connection to the FTP server in case of a hick-up.
    Second: are there any errors in your communication channel monitoring?

  • File Sender Communication channel with error

    Hi,
      One of the File sender CC is in red but shows "Functioning". But in the Process Detail section it just showing
    5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:24:00 AM                                                                     Processing started
    5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:23:00 AM                                                                       Processing started
    5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
      5/10/11 2:22:00 AM                                                                      Processing started
    Please let me know is there any error with my channel ot wny is it red then?
    There is no Polling step in the Process Details..  Please reply ASAP
    Thanks,
    Shweta.

    The Status of the channel is "Processing Erros in  last 20 seconds". And in the processing deatils it just show the below two steps.
    5/10/11 2:24:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:24:00 AM                                                                        Processing started
    5/10/11 2:23:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:23:00 AM                                                                         Processing started
    5/10/11 2:22:00 AM d28c6542-0d7e-453b-1d96-9e0a18159315 Retry interval started. Length: 60.0 seconds
    5/10/11 2:22:00 AM                                                                        Processing started
    It is continuasly showing the same message ID "d28c6542-0d7e-453b-1d96-9e0a18159315 " but this ID does not exist in SXMB_moni  not in RTW message monitoring.
    If I double click the message ID shown in the CC process details it shoes me below content.
    Time Stamp Type Description
    2011-05-09 22:03:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:04:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:05:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    2011-05-09 22:06:00 Information Channel FileSenderGeneric: Converted complete file content to XML format.
    Please tell me what is the problem. there are No java Locks ...I have checked that.
    Shweta.

  • File Sender Communication Channel not working

    Hi All,
    We have one file sender channel which sends file after every 3 hours.
    But currently it has stopped the processing of file.
    If we see in RWB it shows that "Correctly configured and started",but if we start and stop the chanel it doesnt show any processing started message.
    File is there in the folder but the channel doesnt poll the folder to pick up the file.
    We have refreshed the cache and activated the channel again.
    But still no luck,does anybody have any idea?

    Hi Shweta,
    Please check the parameters of your File adapter. There can be following  possibility if File adapter is not picking the file :
    1. File adapter is not active
    2. Incorrect File name, Directory name or path,
    3. File does not exist in the source directory.
    4. If you are accessing file from other server (use FTP protocol) check you have READ and WRITE access.
    Thanks
    Farooq.
    <b>*Rewards points if you find it useful*</b>

  • XI-Multiple instance scenario -File & SQL sender communication channels

    Hi
       i have a basic question regarding how file sender communication channel ( where we poll for a particular file pattern either using file/ftp types in a particular subfolder ) or a sql sender communication channel - ( selecting records from a sql source ) would work in a scenario with two active XI instances and j2EE file and sql adapter services running on both of the J2EE servers ?
    1. How would the file polling from both J2EE servers - avoid a conflict looking for the same file pattern ? Is there any inbuilt mechanism from SAP to make multiple instances work with the file polling - without a confict ?
    2. Simlar question for SQL sender type communication channel ?
    If SAP does have a mechanism to handle multiple instance scenarios for file and sql sender adapter based communication channels, is there a link/document on this ?

    Hi Karthik,
    Please see my comments.
    I am just wondering aloud - what will happen if we use a select for update clause in the sql sender adapter communication channel -
    Gouri: Yes you can use select + update. In fact that is the right way.
    will this ensure that polling from one J2EE instance will lock the selected records so that the second instance does not select the same set of records from the sql server ? Or should we not use a select for update and use a simple select statement ?
    Gouri: Yes. SQL DB will ensure that same data will not be picked by another node. As I mentioned earlier use serilizable option from advanced mode.
    -Gouri

  • Inactive Sender Communication Channel still processing Files?

    We de-activated the Sender Communication Channel of an interface. However, the file adapter keeps processing?
       Anybody know what is going on?
                    Thank-You.

    Hi Tom,
    1)  Check out Whether you have De-activated the Right Adapter.
    2) Refresh the Cache,
    a)Start transaction SXI_CACHE.
    b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
    c)Call transaction SM58 to check the status of the refresh process.If no entry for function module SAI_CACHE3_REFRESH_BACKROUND is Present any more the cache update is finished.
    If you still face issue try this .
    Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
    However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
    To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
    Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
    Regards
    Agasthuri Doss

  • BIC Module Error in Sender Communication channel for EDI to File scenario.

    Hi Experts,
    We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
    Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
    Thanks & Regards,
    Abhishek

    Hi Abhishek,
    Is there any special character present in the EDI file?
    the parser is not able to parse the data.
    you can check the BIC conversion log for more information.
    Regards,
    Harish

  • File Structure - Sender Communication Channel

    Hi All,
    My Sender flat file structure is below like this
    Filed1|Field2|Field3|Field4|Field5|Field6
    Filed1|Field2|Field3|Field4|Field5|Field6
    Filed1|Field2|Field3|Field4|Field5|Field6
    Filed1|Field2|Field3|Field4|Field5|Field6
    Filed1|Field2|Field3|Field4|Field5|Field6
    Filed1|Field2|Field3|Field4|Field5|Field6
    I did the Sender Communication Channel configuration  - Content Conversion
    Document Name : XXX
    Document NameSpace: XXXX
    Recordset Structure: MT_Test,*
    Recordset Sequence: Ascending
    Key field Type: String Case-Sensitvie
    MT_Test.fieldNames: Filed1,Field2,Field3,Field4,Field5,Field6
    MT_Test.fieldSeparator: '|'
    MT_Test.additionalLastFileds: ignore
    MT_Test.endSeparator : 'nl'
    ignoreRecordsetName: true.
    But its pick the file, In SXMB_Moni show Currect...
    But in Runtime workbench, in Communication Channel moni, it show below like this,
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_Test xmlns:ns0="http://XXXXX">
    <JOBS />
    </ns0:MT_Test>
    What is the Issue, where i missed some thing, In message mapping, its correct..
    Thanks.
    SR

    SR,
    I am still little confused with your below statement.
    But its pick the file, In SXMB_Moni show Currect...
    But in Runtime workbench, in Communication Channel moni, it show below like this,
    >
    > <?xml version="1.0" encoding="UTF-8" ?>
    > - <ns0:MT_Test xmlns:ns0="http://XXXXX">
    > <JOBS />
    > </ns0:MT_Test>
    You mean to say that in MONI, the mapping output is fine, but when you check the output at RWB -> CC Monitoring for the Sender Channel, then you get the above mentioned XML?
    This means that there is nothing wrong with your source CC settings. If the entry in RWB -> Sender CC is wrong, your MONI entry will never be right. So, this is really weird.
    What is the source structure that you have defined in DT?
    Regards,
    Neetesh
    Edited by: Neetesh Raj on Sep 29, 2009 2:31 PM

Maybe you are looking for