Why My IMAC OS X 10.6.8 Become Slow On The Network Between Window Server 2008

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

Dear Sir,
I am using IMAC 10.6.8, processor 3.06 GHz Intel Core i3, Memory 4GB 1333 MHz DDR3 and now my lovely IMAC become slow on the network between window server 2008 and my IMAC.
Kindly advise for the above said issue how can I fix it. I already disable in my IMAC IPV6 and I am connect with airport not ethernet cable and my WIFI is LINKSYS modem and all other windows PC's are connected with the Gigabyte switch.
Awaiting your soonest reply.

Similar Messages

  • Why does my Cisco router firewall block Windows Server 2012 traffic, but not Windows Server 2008 traffic?

    Hello,
       I run a small business network with five physical servers: three Dell servers running Windows Server 2008 R2, one custom build running 2008, and another custom build running 2012 with Domain Controller Role (same hardware for both custom builds). 
    The Dell servers are all running the Hyper-V role and each has a number of 2008 VMs.  I also have a 2012 VM with the Domain Controller Role on one of the Hyper-V servers and another VM with a completely base install of 2012.
       All servers are plugged into a Cisco SG300-52 switch which is uplinked to a Cisco 881 router which is connected to a cable TWC provided Ubee cable modem.  I have no VLANs setup.  I do have the Firewall on the router configured
    to inspect most traffic.
       Here is my problem:  I cannot connect to most of the internet on ANY 2012 server (and all exhibit the exact same behavior), but I have NO problems connecting to the internet from 2008 servers.  Here is what I already know:
       1.) I can ping the outside world just fine so ICMP is passing to any external host.
       2.) Two of the 2012 servers are DCs running DNS services and they can connect to the internet just fine for DNS requests because they are doing a perfectly good job of providing DNS services to my network.
       3.) Here's where it gets really weird: I can browse in internet explorer to Bing.com and it works.  I can also go to a couple other Microsoft websites (though they are very slow).  If I click on any link in Bing, however, it doesn't
    work and gives me a page not available error.  If I connect to a non-MS website like Google or my company website, I get page not available.
        4.) I have tried to telnet to port 80 at Bing and it works.  I have tried to telnet to port 80 at google.com and it won't connect.  The 2008 servers have no issue telneting to either bing or google on port 80 and none of my client
    PCs on the network do either.
        5.) Windows Update will not connect and neither will any other update service such as AVG (I have AVG Antivirus installed WITHOUT firewall on two of the three servers. The base 2012 VM has no software installed and no roles...I built it
    just to see if it could connect after a fresh install and it still cannot.)
        6.) The network connection does not indicate limited connectivity (probably because ICMP appears to be passing successfully)
         7.) If I connect the server directly to the modem it has full internet access.
         8.) All internal LAN connectivity is perfectly fine and runs at full speed.
         9.) I have scoured the internet trying to find other examples of this particular kind of connectivity issue on 2012 and I have found two TechNet articles that are similar, but they both had the same resolution: changing the router
    worked, but no one knows why. (I would have included the links, but apparently I cannot do that yet)
    My question is this: What is different about Windows Server 2012 networking that would render it unable to communicate through a router that Windows Server 2008 has no problems with?  I ask because, unlike in these two articles where they were
    running personal networking equipment they could easily upgrade, I'm running a Cisco 881 with what should be virtually limitless configuration options and I have no desire to replace it.  I have to assume the issue is somehow related to the firewall configuration,
    which I could fix easily, but I don't know what to change.  If anyone knows what changed in 2012 and why I would be able to browse to bing and other MS sites but no where else, please pass them along.  Thanks.

    This is the IP Config for the 2012 DC:
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : COMPANYDC02
       Primary Dns Suffix  . . . . . . . : company.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : company.local
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
       Physical Address. . . . . . . . . : 00-25-90-DC-EF-D5
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::81d5:53cf:bd07:14ed%12(Preferred)
       IPv4 Address. . . . . . . . . . . : 10.10.10.202(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.10.10.1
       DHCPv6 IAID . . . . . . . . . . . : 301999504
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-96-D5-C3-00-25-90-DC-EF-D5
       DNS Servers . . . . . . . . . . . : 10.10.10.202
                                           10.10.10.221
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{9929D989-8E88-4096-A1CB-61F1DB173FA3}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft Teredo Tunneling Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    This is the IP Config for the fresh install 2012 VM:
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : WIN-800299O7ES6
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : company.local
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . : company.local
       Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
       Physical Address. . . . . . . . . : 00-15-5D-0A-5C-02
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       IPv4 Address. . . . . . . . . . . : 10.10.10.49(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Saturday, August 23, 2014 10:23:01 PM
       Lease Expires . . . . . . . . . . : Wednesday, August 27, 2014 10:23:01 PM
       Default Gateway . . . . . . . . . : 10.10.10.1
       DHCP Server . . . . . . . . . . . : 10.10.10.1
       DNS Servers . . . . . . . . . . . : 10.10.10.220
                                           10.10.10.221
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.company.local:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : company.local
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    NOTE: 10.10.10.220 and 10.10.10.221 are the other domain controllers on my network.  One of them is 2012 and one of them is 2008.  They are both functioning correctly for providing DNS services.  The 2012 Virtual DC, however, still has
    the internet connectivity issue that this whole post was about in the first place.
    NOTE2: When I logged on to COMPANYDC02 this morning, it told me that I had new Windows Updates that needed to be downloaded.   Confused, I checked the most recent time WU had checked for updates at it had successfully checked for updates last night
    at 10pm.  Of course, it failed when trying to download them, but it appears that once in a while, a connection gets through successfully...

  • IMacs running slow off Windows Server 2008

    Currently the Creative Director and I are the only ones at our company working on Macs. We both are running OSX 10.6.8 on iMacs and we are having major slow loading time in Finder and very, very slow loading time working with Adobe files (PSDs/AIs/INDDs).
    The company I work for has been bought out by another company and they had their tech guys come in to install a server.. I have recently found out that it is a Windows Server 2008. We were told to transfer our files to this server and ever since have been having problems. I have tried to communicate with some of the techs and they either complain about Macs or are not that familiar with Macs. They don't have any other designers at their company, so I am not sure how to get them to understand the issue.
    I have done some research and found others with similar problems, but I am not really finding a solution or a discussion that is very recent. I think this is a problem that has been around for awhile, but we are new to it. The problem seems to be with the SMB sharing.
    We would be grateful if anyone had any insight or infomation regarding working off a Windows Server 2008 from a Mac or whether we should recommend us working off a Mac Server which is backed up to the main server.
    Thanks!
    Aa

    Appreciate it Ed.
    I let our boss know about Extreme ZIP and forwarded the link to our IT team. Although we haven't gotten a response back yet, I am thinking that a mac server would be a cheaper purchase overall since it wouldn't be a reoccuring monthly charge.
    If we were to convert one an extra Mac Pros to a Lion Server, is it possible to have that backed up or connected to the Windows Server 2008? Or would we need to do that the Mac Pro. Not sure how to word this, my lack of experience in servers shines through here.
    Really trying to save us from switching to PCs, thinking if we can convert the Mac Pro to a Lion Server it would be our least expenseive route.
    Thanks again,
    Aaron

  • IMac 6 issuing IP address's when plugged into the network.

    I have an iMac 6 that I have on a Business Network, when I plug in the network cable it starts issuing IP address's which is creating havoc.  I have disabled Internet sharing.

    Presumably you are using DHCP on your iPad and router to allocate local network IP addresses?
    If so then your router has not given your iPad a valid IP address when the iPad requested it.
    Sometimes the fix can be as simple as restarting your router (remove power to it for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
    If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), MAC address filtering being used, etc.

  • Why the response is very slow when the DNS enrty of server PC is removed ??

    Hi
    Though this subject has been already discussed at many places,im unable to get the clue.Here is my problem.In my office (LAN),server and client are running at different PC.After DNS entry of server PC is removed from DNS server,the page loading and every request & response between client and server is very slow.It takes 2 minutes for each and every request.And coming to the possible solutions,is "configuring the server PC in DNS server" is the only solution?When both the server and client PCs are DNS configured i dont see any issue or slowdown.Any help would be really appreciated
    Assuming it is a lookup issue,i have written the following test application.
    public class DnsName
    public static void main(String[] arg)
    String ipaddress = "";
    String hostaddress = "";
    if(arg.length == 1)
    ipaddress = arg[0];
    else
    System.out.println("!!!!!!Usage : java DnsName <ipaddress>");
    System.exit(0);
    System.out.println("Time before processing : " + System.currentTimeMillis());
    try
    hostaddress = (InetAddress.getByName(ipaddress)).getHostName();
    catch(UnknownHostException uhe)
    System.out.println("Exception occured " + uhe);
    System.out.println("Ip address : " + ipaddress);
    System.out.println("Host name : " + hostaddress);
    System.out.println("Time after processing : " + System.currentTimeMillis());
    When it was compiled and run on a linux PC,time difference betwwen process is around 50ms,but when the same application is run in a Windows PC,the time difference is around 4-5 seconds(4000ms).Can anyone tell me what makes the difference in Windows??
    [email protected]
    www.adventnet.com

    When you do getHostName() on an InetAddress, what you're doing is asking the OS to do a reverse lookup. So basically this is a windoze problem, not a java problem (although that probably doesn't help you much) Try searching google to see why a windows reverse lookup might be so slow and go from there.

  • My new iMac is seen as my old Mac Pro on the network because I used Migration Assistant. How do I change its name to iMac?

    I used Migration Assistant about 4 months ago to move everything across to my new iMac. Since then instead of being recognised as an iMac it's seen on the network and other places as my Mac Pro.
    How do I change its name to iMac?
    Cheers,
    David
    Mac OS X 10.6.8

    Hello David. Open System Preferences > Sharing. At the top you will see Computer Name and the old Mac Pro name. Highlight this and change to the preferred name.
    Sometimes you also need to use the Edit button under the name. But if you change the name in the first view and then press the Edit button, it should show the new name you just set.

  • Why my iMac (mid 2010 - model 11,2) doesn't recognize the RAM upgrade?

    Hi, I have a big problem. I bought on Amazon 16 GB of RAM (Corsair Ddr3 1333Mhz 4Gb 204 Sodimm unbuffered). The problem is: my iMac can recognize a max of 3 benches of RAM but not 4. Everytime i try to upgrade all the 4 benches the iMac freezes and does 3 loud beep, while when upgrading only 3 benches it works. These are the attempts i made with every single bench of RAM:
    -2x2GB Original RAM - IT WORKS
    -1x4GB bought RAM - IT WORKS - i try every single bench of RAM, this means that the products are ok.
    -2x4GB bought RAM - IT WORKS
    -3x4GB bought RAM - IT WORKS
    -4x4GB bought RAM - DOESN'T WORK - 3 beeps signal
    -3x4GB bought RAM + 1x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    -2x4GB bought RAM + 2x2GB Original RAM - DOESN'T WORK - 3 beeps signal
    Is there someone who had the same issue and can tell me how to solve it?
    Thanks!

    As has been mentioned endlessly in this Forum, iMacs are particularly sensitive to the exact Brand of RAM that they will run Stabley with.  Samsung, Crucial and OWC's are noteworthy brands that have consistently received glowing reports of compatibility herein.  Straying to other brands frequently results in the kind of problem you are experiencing.
    I would concur with X423424X that you return the Corsair modules and go with OWC (http://www.macsales.com) or one of the others I've recommended.
    Hope this helps

  • My iMac with Leopard does not see Vista PCs on the network

    My iMac with Leopard cannot see any of my Vista PCs on my network. I have an older G5 iMac (tiger) and the Leopard system see that one just fine. My older G5 sees my Leopard mac and all of the Vista computers. I just want the Leopard mac to see the Vista computers. Please help.

    I'm having the same problem. It was literally working one minute and not the next. I also had this issue with my MBP but it was never resolved. I can ping the vista machine but not connect to the folder structure. This is really annoying because my vista machine is acting as a server and I need to remote desktop from the iMac to the windows machine.
    Any ideas people?

  • Why are my MacBooks so slow on the network when everything else is fast?

    Last month, my apartment complex changed its network from a pretty wide open Wi-Fi to one where we must enter a user name and password every 30 days for each machine.  Since then, both my MacBooks (2012 MBP running 10.8.3 and 2008 white MB running 10.7.5) have very slow connections.  Web pages will fail to load, or load incredibly slowly (as in the progress bar moves an inch then stops).  We get bursts of activity (as also seen in Activity Monitor) lasting for seconds (limited to 4mbps down/0.2mbps up by the new ISP).  This occurs on both Safari and Firefox.  iTunes music store, the Mac App store, Mail, and Spotify all exhibit identical behavior.  My iPad, iPhone, and another's Windows netbook connect without any obvious difficulty.  We had a rep from the new ISP come to check out our connection, and he believes that the problem is directly related to the MacBooks (a virus on both?).
    Things I've tried without change in behavior (with the 2012 MBP):
    1.  Connecting directly to ethernet (and turning off AirPort).
    2.  Restarting the computer and the router.
    3.  Logging in elsewhere in the complex
    4.  Changing DNS to 8.8.8.8 and 8.8.4.4
    5.  Deleting AirPort and re-installing in System Prefs
    6.  Following the excellent "Step by Step to Fix Your Mac" https://discussions.apple.com/docs/DOC-3353 on these forums, including clearing every cache imaginable with Onyx, and uninstalling Java, Silverlight, Flash, and any System Pref plugins.
    7.  Sorting through Activity Monitor to find anything else running on my CPU of consquence--I don't think so.
    8.  Confirming good ping and down/up speeds on Speedtest.net with my iPhone
    I know little about networking, but I'm learning.  Any other suggestions?  Why does the MacBook behave differently on this network?

    bowsplash wrote:
    Thank you for the suggestions.  I agree that my ISP rep looked a little confused by my problem.  He was comfortable using Terminal (at least for basic network queries--more than I know how to do).
    Although I physically have the ISP's router in my apartment, the ISP has changed the password, and I'm unable to change channels (though that shouldn't explain the peristent problem on ethernet).  I've tried restarting it many times, including unplugging it.
    I just emptied my trash (and restarted the computer).  500gb HD, 24gb free. No change in performance.
    You're running out of HD space.  That's the problem.
    Empty the trash in the Dock as well as iPhoto’s trash!
    Open up your application folder & go through all your apps.  Trash all the apps you no longer want and/or use.
    An easier way to do this is to open the Application folder in list view & press the Command+j keys.
    In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box.
    Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
    Get rid of all your photo files you don't want and/or need.  Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).  Or transfer/move them all to a photo/movie storage site like ImageShack and Photobucket, 2 of the most popular  FREE  storage sites.
    Get rid of all your video & music files you no longer view and/or listen too.  Especially, if you already have the actual CD/DVDs or you can later redownload from a website.  Or transfer them all to a FREE video/movies and/or music storage site.
    Use Spotlight to make sure you got rid of everything.  You can even trash directly from Spotlight!  Better yet, download this FREE software called Find File.  This app puts Spotlight to shame (works w/Mountain Lion).
    Drag what you don't want and/or need to the trash.  Better yet, download this neat little shareware app *demo* called AppZapper.  It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
    Another software that does the above is AppDelete.  Best of all this software is free!
    Burn what you want and/or need onto CDs or DVDs. Not everyone has the  luxury of purchasing an external HD and/or the system requirements for iCloud to store their "stuff.”
    Dropbox is a free storage utility to check out.
    You can check with your ISP to see if they offer *free* storage space.  Most if not all do now-a-days.   There are thousands if not millions of *free* storage facilities on the web also.  Use your favorite search engine to search them out as they come in different storage sizes to fit your needs & wants.
    Check for duplicate fonts.
    Applications>Font Book
    Select “All Fonts”
    If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
    To clean this up, select a “black dotted” font or the Apple + *click* to select multiple dotted fonts;
    Edit>Resolve>Duplicates.
    What the above does is turns off the duplicates & multiple version fonts.  Not delete them.
    More than likely the “extras” were installed by other programs and/or other users.
    Clear out font caches
    Use FontNuke.  It does all the work for you.  And, best of all it’s *FREE*.
    Printer Drivers
    Get rid of all the printer drivers you don’t need & use except the ones for your *current* printer(s)/scanner(s).
    HD>Library>Printers Folder
    If you accidently threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
    Garage Band
    Has about 1GB of loops stored.  Get rid of some some them.  You surely don’t use, like and/or need them all.
    HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
    Or just get rid of the Garage Band app altogether if you don’t use it.
    Get rid of extra languages
    Strip your computer down to your “native” tongue.
    You can do this with a *FREE* utility called Monolingual.  Another app that apparently does all the work for you.  I’ve never used it.  However, a lot of users here swear by & recommend it highly.
    However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
    Other Resources:
    HD Space Checkers:
    Disk Inventory X (FREE)
    WhatSize (SHAREWARE)
    OmniDiskSweeper (FREE)
    GrandPerspective (FREE - donation)
    ==================
    Mac Performance Guide
    Slimming your hard drive
    Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.
    Quick fix
    How To Quickly Free Up Hard Drive Space on Mac OS
    http://www.youtube.com/watch?v=fO-mlLApEuk

  • Why is my ibook so slow on the network?

    It seems that when I use Wifi with certain public networks some of them are much slower than others. But the speed issues are only felt on my ibook but not on the PC. For example there is one public library around my area that I can access with my ibook. It seems to take FOREVER to access FTP (either with OSX Fetch or Transmit 1.7 (which runs in Classic). It also seems that websites are rather slow. But the problem and why the IT people will not listen to me, is that I am usually the only person in the entire library that is using a Mac. Everyone else is using Windows and even I have used Windows and these problems are non existant on the PC. Why is this?
    Any of my FTP servers that I try to access on my ibook takes days to load, and most wbsites are very slow. But this is only a problem on the ibook and not on the PC's.
    You may think I have a configuration problem but think again after you hear that when I get in my car and drive some 15-20 minutes away to another library and access their Wifi network my ibook works just fine!
    This is very strange.
    Thanks for any tips.
    John

    The library probably just has their network misconfigured. They got it working on Windows and don't care about the Mac. It is definitely the library's problem, not your Macs. You won't be able to fix it.
    This is uncommon, but not unheard of. I had an interview at Microsoft once. I couldn't get my iBook to work with the Wifi (or hard-wired!) network at the hotel across the street. I even called up tech support. They had the netmask completely wrong. It only works on Windows because Windows doesn't conform to networking standards. For some reason, the hotel that Microsoft puts all the interviewees in doesn't work with Macs. Go figure. I didn't get the job. Maybe because I took a Mac to an interview at Microsoft. Hey, I have my priorities!

  • Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

    Hello,
    I have a Windows Server 2012 R2.
    I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
    on it (this machine is also a domain client in the same domain).
    I will really be thankful if anyone can suggest some solution to this issue.
    Please feel free to write back in-case I have missed anything obvious to be shared.
    Thanks!
    -Vinay Pugalia
    If a post answers your question, please click "Mark As Answer" on that post or
    "Vote as Helpful".
    Web : Inkey Solutions
    Blog : My Blog
    Email : Vinay Pugalia

    Hi,
    Any update?
    Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
    Best Regards,
    Andy Qi
    TechNet
    Subscriber Support
    If you are TechNet
    Subscription user and have any feedback on our support quality, please send your feedbackhere.
    Andy Qi
    TechNet Community Support

  • On Windows Server 2008, local account passwords are reset when the server is rebooted. Why, and how do we fix?

    We are running a commercial application on a Windows 2008 Server. After reboot, we cannot access the application because two services fail to start. The reason they fail to start is that the passwords to the local user accounts tied to those services have
    either been deleted or reset to a different value. In order to restart the application, we must reset the passwords of these two local accounts, then stop and restart all the application's services.  According to the application's maker, the accounts
    must be local.
    My colleague believes the passwords are being deleted or reset as a result of a global domain policy.  Is this likely?
    Assuming my colleague is correct, is there anything we can do locally to prevent these passwords from being deleted or reset when the server reboots?  If not, what is the most granular change we can ask our AD adminstrators to make to the policy, so
    that these local accounts are not touched at reboot.
    Thanks.

    Hello,
    have you configured the accounts to have the permission "Log on as a service"? I have seen that this is not given to the account and therefore the service fails to start.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Why aren't my bookmark folders showing up as options in the "page bookmarked" window?

    I recently upgraded to Firefox 18 and when I go to make a new bookmark folder I can see it in the bookmarks menu under "show all bookmarks" but when I'm trying to bookmark a page while browsing the folders are not showing up in the pulldown menu on the "page bookmarked" window.
    I can't use Choose to find the folders either
    I can then go back and manually drag the pages over but that's annoying.

    The drop-down shows a few recently used folders. If you expand the folder using the button to the right of the drop-down, can you find the new folder on the full list?

  • Why is sti.dll missing on Windows Server 2008?

    This dll is in [SystemsFolder] on XP and Vista, but does not exist on Windows Server 2008.  A bug?
    Thx.

    este link não funciona mais.... achei esse passo a passo.
     . 1 Clique em Iniciar, clique em Ferramentas administrativas e, em seguida, clique duas vezes em Gerenciador do Servidor.    2 No Server Manager, clique em Adicionar Recursos em Resumo de Recursos..  
     3 Na Adicionar. caixa de diálogo Recursos Wizard, certifique-se de que a opção Desktop Experience está selecionado.    4. Clique em Avançar e, em seguida, clique em Instalar.    5.
    Após o processo de instalação estiver concluída, clique em Fechar e, em seguida, feche o Server Manager. Observação Depois de instalar o Desktop Experience, você tem que reiniciar o computador.

  • Why the response is very slow when the DNS enrty of server PC is remov

    Hi
    Though this subject has been already discussed at many places,im unable to get the clue.Here is my problem.In my office (LAN),server and client are running at different PC.After DNS entry of server PC is removed from DNS server,the page loading and every request & response between client and server is very slow.It takes 2 minutes for each and every request.And coming to the possible solutions,is "configuring the server PC in DNS server" is the only solution?When both the server and client PCs are DNS configured i dont see any issue or slowdown.Any help would be really appreciated
    Assuming it is a lookup issue,i have written the following test application.
    public class DnsName
    public static void main(String[] arg)
    String ipaddress = "";
    String hostaddress = "";
    if(arg.length == 1)
    ipaddress = arg[0];
    else
    System.out.println("!!!!!!Usage : java DnsName <ipaddress>");
    System.exit(0);
    System.out.println("Time before processing : " + System.currentTimeMillis());
    try
    hostaddress = (InetAddress.getByName(ipaddress)).getHostName();
    catch(UnknownHostException uhe)
    System.out.println("Exception occured " + uhe);
    System.out.println("Ip address : " + ipaddress);
    System.out.println("Host name : " + hostaddress);
    System.out.println("Time after processing : " + System.currentTimeMillis());
    When it was compiled and run on a linux PC,time difference betwwen process is around 50ms,but when the same application is run in a Windows PC,the time difference is around 4-5 seconds(4000ms).Can anyone tell me what makes the difference in Windows??
    [email protected]
    www.adventnet.com

    Because it does a DNS lookup. And without a server, the interface must wait for a timeout.

Maybe you are looking for

  • How to change default decimal separator

    Hi, what is the problem with the code below ? The output is 1234.5 however, I need it to be 1234,5           String itemFormat="%4.1f";           Double x = 1234.5;           Locale dl = Locale.getDefault();           DecimalFormatSymbols dfs = new D

  • Signing a form without a signature field

    We use the certify method of the SignatureServiceClient as described in http://help.adobe.com/en_US/livecycle/9.0/programLC/help/index.htm?content=000898.html Because we simply want to sign the form, we create an invisible signature field and pass th

  • How to find out the page break in the scripts?

    Hi Friends, this is very urgent, plz help me, I want to initialize one field(&script-counter&) at each page break. so how can I find out when the page break has occured? regards, Venkat.

  • Better Viewing Experience: iPad to tv or Apple TV?

    I'm brand new to Netflix and just watched my first few movies on my iPad. Playback paused a few times (I assume due to buffering over my wifi network?) and video quality wasn't the best. I'd like to watch Netflix streamed movies on my TV and I'm wond

  • Can't Create User after migration

    I recently upgraded a PPC xserver running leopard to a new Power Mac running lion server. Everything seemd to go smoothly but after a more thorough look I am having issues. The main one being I cannot create users in the I go into the server.app and