Why my iPad 4G GSM-CDMA model cannot recognize my ruim cdma card?
I want to use cdma ruim on my iPad 4G GSM-CDMA model, but when I insert it, there is no respond from my iPad. Not detected. Anyone know why?
Oohh.. That bad news! :-(
So what I should do if I want use cdma if ruim is not supported.. :-(
Should I go to carriers and ask them to inject my iPad? If that so, then the worstnis the carriers in Indonesia until now cannot inject it to iPad or iPhone.. :-(
Similar Messages
-
Is ipad 2 gsm 3G model available in usa?
is ipad 2 3G gsm model available in usa??
will it support indian 3G networks??The iPad2 3G GSM product is available in the US.
-
Pls take note that my IPad 3 used to find my printer HP wireless D110. The only thing that I did was to update to IOS 7. Do you think this is the reason why my iPad cannot find my wireless printer?
1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print. -
I have iPhone 4(CDMA model)anyway can I uses that iPhone with AT&T wireless plan
No. A CDMA phone can not be used on a GSM network nor can it be modified to do so.
-
Hello Folks.. I have recently purchased a ipad mini with wifi Cellular from best buy online.. Model: MD543LL/A. Can I use this ipad in India with any local networks? Basically does this ipad support GSM network?
Message was edited by: Murali.KRSorry but that was a completely pointless post.
-
HT201471 Why did I get a 2011 model ipad when I just purchased it from apple?
Why did I get a 2011 model ipad when I just purchased it from apple?
If you ordered an "iPad 2" (as shown in your profile), that model was created in 2011. The current model is called "iPad with Retina Display" (or "iPad 4" colloquially).
-
Model A1586 (GSM) vs Model A1586 (CDMA).
Hi everybody,
I would like a clarification on Model A1586 (GSM) vs Model A1586 (CDMA). What is the difference and how can i specify that in the online order?
Does both models support both GSM and CDMA or not? I would like to use my phone to other EU countries so will my decision of GSM or CDMA affect coverage?
ThanksHi Peter,
thanks for your reply but I was not referring to ordering the phone from the US and apple.com.
In addition I do know the difference between GSM and CDMA and do not need to use google on this one.
My question is simple. From Apple.ie store I can order either Model A1586 (GSM) or Model A1586 (CDMA).
However nowhere in the online site it is specified how to select the GSM or the CDMA model.
Also having used the online support chat from Apple they claimed that both models support both CDMA and GSM which sounded strange.
So becuase I am going to pay approx 700 Euros, I would not want to end up with a phone that does not support the networks intended to use within Europe. -
Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard fast it lag until I cannot locked or switch off the phone
Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage.
-
Why my IPad update cannot be unload and is empty
Why my IPad update cannot be unload and is empty?
If you are getting the blank app update screen, many people are having this problem over the last few days. If you see the red notification numbers on the App Store icon, you have apps that do need to be updated.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then. -
Hi,mayni know why my ipad cannot update.before this my ios is 6.1.1
hi,mayni know why my ipad cannot update.before this my ios is 6.1.1
How are you trying to update, via wifi or itunes? If using one, then try the other.
What version do you currently have now? -
Why my ipad cannot watch any video smoothly using safari
why my ipad cannot watch any video smoothly using safari
ipad and ios5.1.1Can be caused by slow internet
http://itunes.apple.com/sg/app/speedtest.net-mobile-speed/id300704847?mt=8&ls=1 -
Why do iPads and iPhones have bluetooth if they can not be paired? What do I need to pair these two and share files?
Why do iPads and iPhones have bluetooth if they can not be paired?
They can be paired, but you need to be using suitably equipped apps that support peer-to-peer Bluetooth functions - such as multi-player games, photo sharing apps etc.
They can also be paired to headphones, speakers, car stereos, headsets etc. -
Hi,
I would like to ask about some information on iPhone 6Plus
Can i know whats the difference on these two models between Model A1586 (GSM)* and Model A1524 (GSM)* as shown in the Malaysia apple website?
If its different, then the product which consumer wanted to select, will it be all the model same price in Malaysia?
Thank you.
Your sincerely,
Nick"why should Apple manufacture the 2 models as different models?"
Apple doesn't manufacture two models with the same model number. The "1429" iPhone can utilze either the GSM or CDMA protocol, depending upon the carrier's system. In the US, Apple offers an unlocked "1428" iPhone 5, for use on GSM networks. I live in Bangkok, and Apple - and Premium Resellers - offer the "1429" iPhone, which can be used on either GSM or CDMA networks. -
There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?
I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
As for the crashes on your iPad try these basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s Starting up database 'model'.
2009-08-13 14:15:44.32 Server Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
status
master
65544
tempdb
65544
model
65568
msdb
1073807368
SS_DBA_Dashboard
1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server Error: 17058, Severity: 16, State: 1.
Server initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server All rights reserved.
2011-03-29 16:50:49.40 Server Server process ID is 7292.
2011-03-29 16:50:49.40 Server System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Maybe you are looking for
-
How do I create a context menu in the new CL_SALV
I like a function xx in context menu. How do I create a context menu in the CL_SALV ? thank you! CLASS lcl_event_handler DEFINITION. PUBLIC SECTION. TYPES: t_proc TYPE zmp_c00_pr_d, tt_proc TYPE STANDARD TABLE OF t_proc,
-
Can't update java on mac os 10.5
It has come to my attention that Apple's imbecile policy on Java updates prevents users of Mac OS 10.5 and under from updating their Java to the current version, thereby exposing them to potential risks due to known vulnerabilities in the outdated Ja
-
PP Scenario Mapping help Needed
Hi Guys Can anyone please help to map the following scenario? <b>Scenario:</b> SAP PP <b>Product:</b> Ingot <b>Size:</b> Ingot 100 X 100, Ingot 125 X 125, Ingot 160 X160 <b>Grade:</b> A, B, C, <b>Saleable Item:</b> Ingot100 X100 Grade A, Ingot100 X
-
Need Help [Toshiba Registration] plzzz!
I registered my product ,but i chose wrong Country puchrased: United States I puchrased it on switzerland , how can I change that? Here is the link where you can see product information http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/globalEntitl
-
hi , I am using flex3 and i just wanna write an xml content in to an file and need to read from there... I saw flash.filesystem .File, flash.filesystem.Filestream which belongs to Adobe AIR and also done a sample , it was ok during compilation of uti