Why my ipad does not connet to android device using bluetooth

I am trying to connect my Ipad to android phone using bluetooth, it shos the name of device but does connect to android phone although they both were able to discover the device. I am trying to transfer some files from android to ipad.
any help?

IOS devices dont allow bluetooth profiles for file sharing. Bluetooth is too slow for that in my opnion to be of any use. I have heard there are apps that allow you to do so. I dont know what they are called. I would use email, it is way faster!
Dropbox? Maybe
Message was edited by: Laxman25

Similar Messages

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

How do I print from an Android device using bluetooth?

You had purchased the Officejet Mobile 100 printer to print from your Android device using bluetooth.
You have the devices paired with bluetooth, but do not see an option to print or the print button does not work in this case.
Well, here is how this can be accomplished in Android.
For this example, I will use the steps to print a photo.
1. Pair the devices.
2. Open a photo you want to print.
3. Select the share option (may say send using depending on the version of Android).
4. Select Bluetooth.
5. Select the printer from the list of devices.
6. The file will be sent to the printer. You can check the notification area at the top to see how the progress is going. It may take a few minutes for the sending to finish.
7. It should then print the photo.
HP Bluetooth printers natively support the printing of photos only, but a third party app can be used to print documents and other items.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
This question was solved.
View Solution.

Hope this information is useful.
I know there have been many instances of users that have not been able to print through bluetooth from an Android device.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

IPad does not appear in iTunes Devices list

My MacBook Pro, iPhone, and iPad are all on the same network, however my iPad frequently does not appear in iTunes Devices when not physically connected by USB. No problem with my iPhone. Anyone else with this problem? Any solution? (Yes, all OS/iTunes softwares are current.)
Further detail, to temporarily fix this issue, I physically connect my iPad via USB to sync it. Temporarily the iPad will be seen in the device list allowing sycing to occur while remotely charging, but at some random time later my iPad is no longer found by iTunes - again without the physical USB link. So, yes there is a work around, but it is annoying to be so up and down with this feature.
Any ideas are appreciated.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

HT201412 Why my ipad does not permit centurylink router to connect to wi-fi

i have a ipad2 and been trying to connect to a centurylink router and it does not permit me to get connected does somebodty know why

You have got some help in the interim. It took it from your original post that the service point tried recovery mode with a view to restore and since that failed I suggested the battery charging aspect. It could have could have bearing on the success of the recovery/restore.
Here is my standard reply for devices not recognised in iTunes. Try those aspects not already done and if necessary try the restore yourself in accordance with th guidance given in the links-
It is assumed/inferred that iTunes is opening up OK. (It will not open automatically upon connecting your device to your computer if your preferences have been set to prevent it syncing automatically upon such action!)
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://support.apple.com/kb/HT1808

Sprinboard screen does not work on android device

Hi experts,
I have a mobile application that i coded on JDEV 11.1.2.4. And i deploy via sdk android-4.3 version. I set DefaultSpringboard on adfmf-application.xml file.
When i deploy on AndroVM or another Android VM either SDK Emulator, i can see springboard screen properly. But deploy on real devices (tried with Android 4.1.1 Tablet, Android 4.1.2 Sony experia phone, Android 2.3.5 HTC phone) could not see anything, just seen black screen with header(written as applicationName) AdfmfContainerUtilities.showNavigationBar(); does not work also.
How can i resolve this?
Also i tried to create completely new adf mobile application that contains only 2 feature and applied the scenerio, it fails on real device too. I think that the problem is on loading featureList. Because when i created an amx page and set as CustomSpringboard. It works
Please help me..
brgds
I m adding my adfmf-application.xml file content, essentially i tried almost all different setting in it.
<?xml version="1.0" encoding="UTF-8" ?>
<adfmf:application xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:adfmf="http://xmlns.oracle.com/adf/mf" name="MLMobilKatalog"
                   id="com.accmee.MLMobileCatalogue"
                   appControllerFolder="ApplicationController" listener-class="com.accmee.application.LifeCycleListenerImpl">
<adfmf:featureReference id="com.accmee.Login" showOnSpringboard="false" showOnNavigationBar="false"/>
<adfmf:featureReference id="com.accmee.productList"/>
<adfmf:featureReference id="com.accmee.productDefinition"/>
<adfmf:featureReference id="com.accmee.favourites"/>
<adfmf:featureReference id="com.accmee.messages"/>
<adfmf:featureReference id="com.accmee.categoryDef"/>
<adfmf:featureReference id="com.accmee.exit"/>
<adfmf:featureReference id="com.accmee.menu" showOnNavigationBar="false" showOnSpringboard="false"/>
<adfmf:featureReference id="com.accmee.menuList" showOnNavigationBar="false" showOnSpringboard="false"/>
<adfmf:preferences>
    <adfmf:preferenceGroup id="application">
    </adfmf:preferenceGroup>
</adfmf:preferences>
<adfmf:navigation>
    <adfmf:navigationBar enabled="false" displayHideShowNavigationBarControl="false"/>
    <adfmf:springboard enabled="true" showSpringboardAtStartup="false" displayGotoSpringboardControl="false" animation="none"/>
</adfmf:navigation>
</adfmf:application>

Per the release notes, Wallaby only supports Chrome and Safari at this time.
And yes, it only works with Adobe Flash Professional CS5 files. To use older Adobe Flash Professional files you can resave them in CS5 and then run them through Wallaby. This is a technology preview (not a product) and therefore has certain limitations that might not exist in a shipping product.
You mention this doesn't work on an itouch G3. You mean an iPod touch G3, yes? What version of iOS do you have installed on your iPod touch? This may be related to incorrect serving of SVG content (if you are using apache) and so you may need to update your .htaccess file in apache per the Wallaby technical tips page.
Michael O'Rourke
Adobe Wallaby Team

My iPad does not appear as a device in iTunes

I have sinced my iPad but it does not appear in iTunes as a device whatever I try. Are there any tricks?

I had this a while ago and it may work for you. Hook up the iPad with the cable and in the Summary page under options see what is checked
For wiFi to work you need the sync with this iPad over WiFi selected.
I am assuming you have already done this. I deselected the Wifi, Sync'd and the reapplied it and syn'd. The disconnected the USB cable and the iPad remained connected

IPad does not appear as a device in iTines, nor on My Computer

My iPad previously linked ok to iTunes and listed as a device on My Computer. Now suddenly it does not, and in iTunes when I select Apple store I get an error message "unknown error" or "cannot connect to Apple server". Yet I am connected to internet and my iPad connects to internet, too. Help.

I would start here:
http://support.apple.com/kb/TS1495
(iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

IPad does not show up in devices under itunes, cannot synch

The initial time I plug my mom's iPad into her laptop her iTunes does not auto launch like it should, so if I launch it, it doesn't show me devices so I cannot mannually start to synch. Help!

Two things: if Preferences have been changed in iTunes to not sync automatically upon connecting the iPad then iTunes will/should not launch. You have to do it manually. I suspect the setting is not the problem so see here-
1. Make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
2. Try all the other ports on your computer, even a number of times.
3. Make sure your lead /connections are not faulty.
4. If you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
5. Make sure you have the latest version of iTunes installed.
6. If using Widows, make sure all Windows Updates are installed.
7. Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
8. And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://support.apple.com/kb/HT1808

Why doesnt my ipod not connect to other device through bluetooth

Why doesn't my ipod touch 4g connect with other devices through bluetooth ?

Because the iPod does not have the necessary BT profiles to do that. You can pair with another iOS device via BT via some apps that for peer-to-peer gaming.
You can also use apps for limited file transfer between iOS devices like this app:
https://itunes.apple.com/us/app/id590369016?mt=8
Without apps you can pair to newer iPhones to share there interent connection if you have subscribed for sharing with your carrier

My ipad does not appear as a device in itunes when connected (1st time trying to sync). all other apple devices are fine and I have the latest itunes version.

I have a new ipad2 for xmas . I have tried to sync the device to itunes and it is not being seen. I have the latest version of itunes, updated last night, and have several other devices that are seen fine (iphone/ipods).
When I connect the usb direct to the mac iphoto starts but then that is it - itunes will not recognise the device......
I have gone thourgh the suggested support help on the apple website and came to the last point - review community ... so here I am!

What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540

IPad does not show in iTunes devices

I wanted to install iOS 4.2 but cannot get my iPad recognized on iTunes.
When I plugged the iPad into the MBP I get an OK tone as usual.
It has been connected successfully in the past.
I have restarted both my MacBook Pro and iTunes in different orders.
My AppleTV shows up on devices every time.
Harold

I have tried everything and still iTunes will not recognize the iPad. From the other complaints it seems this is a big problem for many of us.
My problems started when the iTunes v10 was introduced. I still use 9.2.1. I am waiting because I have an AppleTV1 and wanted to see how it effects others with the first version. I really like my older AppleTV and have many items loaded.
Harold

My ipad does not show in itunes devices again i keep having to reinstall itunes, my ipad does not show in itunes devices again i keep having to reinstall itunes

I keep fixing this problem and it keeps returning. It happened to ipod touch also. Batteries are charged. 10.2.2.14 itunes

It may have something to do with a conflict with any antivirus or security software that you may be running. I don't know if you've read this, but here is Apple's support article for Windows. You say you keep fixing the problem - I assume you mean by reinstalling iTunes?
http://support.apple.com/kb/TS1538

Photo importer (12.0) does not detect my Android phone (OS X Mavericks) over USB

I am running Photoshop Elements 12.0 on OS X Mavericks. When I do, "File > Get Photos and Videos > From Camera or Card Reader", but it does not detect my Android device (Nexus 4, 4.2.2). On the Android side, I switch between Media Device (MTP) and Camera (PTP), refreshing the list, to no avail. OS X's Image Capture sees the files; Android's File Transfer utility does, too. I've tried multiple USB ports, but that doesn't help.
What's wrong?
Thanks in advance.

That is what I had to do, but I should be able to skip that extra step, especially because I like Photoshop Element's ability to verify the pictures and delete them directly from the source. If this really isn't possible directly from Photoshop Elements, then this issue is a fairly major oversight.

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

The name of my wireless network in the form of my modem router is not read from the iPhone, while the first era.Il my ipad does not read the network but I surf the internet. Why? What can I do?

Can I use this DIR-635 to extend the WiFi network of the "Belgacom" WiFi?
To answer this question correctly, a user would need to have a DIR-635 router connected by Ethernet to a Belgacom router.
If you think about it, the chances of another user who has these two same devices configured this way and also being on an Apple support forum to see your post are about zero.
The following might work, but you will not know until you try.
Configure the DIR-635 to provide a wireless network that uses the exact same wireless network name, exact same wireless security and exact same password as the Belgacom wireless router. Make sure that the DIR-635 is configured in Bridge Mode.
Can I purchase and set-up an Apple Airport Express or Apple Airport Extreme on my level 1 (the ethernet cable running from level 2 to level 1 could plug-into either of those)
The AirPort Express or AirPort Extreme would need to be configured exactly the same way as mentioned above.
(What is the difference in the 2 -- one is about twice the price of the other…)
http://www.apple.com/wifi/

Why my ipad does not connet to android device using bluetooth

Similar Messages

Maybe you are looking for