Why my iphone4 doesn't vibrate anymore when it's in silent mode?

I checked if the vibrate modes were on & they're,  and I've been having missed calls due to this issue, how can I fix this??? Thanks

Hi Mike,
Thank you for replying. We have tried it using a different QR code reader and it does the same thing. It's very strange as it doesn't make sense that it would work in Indesign and also if you save it as a jpg it's still readable but as a pdf it doesn't scan. I had previously created the QR code online using a website and placed it into Indesign and that worked when it was saved out as a pdf but it created a white box around it and I prefer just the code with no background. My colleague discovered we can create one in Indesign in whatever colour which is great but am stumped by it not being readable in a pdf. I'm going to try and do the same in Illustrator and see if that works, if not I will send it over to you.
Thank you very much.
Mel

Similar Messages

  • My 5300 doesn't vibrate anymore.

    Since today my gsm doesn't vibrate anymore,
    I reset all my configurations. But nothing worked. What should I do??

    That happened to me before after droppping my phone..When dropping it again by accident it worked again There is a little vibration motor inside the phone which may not be alligned properly.If it is under warranty bring it to nokia centre for repair!! If not -you could try gently tapping /flicking the back of the phone and see if that works

  • [SOLVED] Laptop doesn't suspend anymore when closing lid [GNOME 3]

    Hi there!
    Since I upgraded to GNOME 3 recently, my laptop (Acer Aspire TimelineX 3820TG) doesn't suspend anymore when I close the lid. Instead, it just turns off the screen. If I choose suspend from the menu, it does suspend properly.
    I googled a bit and found out that the option what to do on closing the lid was dropped in GNOME 3, setting suspend as default action. That's exactly what I want...
    Also, I checked that option via gnome-tweak-tool and dconf-editor, and (surprise!) it was set to 'suspend'.
    Anyone got an idea what to do to make it suspend again on closing the lid?
    Last edited by perpetrator (2011-10-17 14:25:26)

    Sorry to bother you again, but for some reason it doesn't work anymore...
    Somehow it can't lock the GNOME session, because when I enter the above line from /etc/acpi/handler.sh manually as root in TTY1, I get this error:
    ** Message: Failed to get session bus: Befehlszeile »dbus-launch --autolaunch=c9375f4ea0008d92177b28db000009ae --binary-syntax --close-stderr« brach mit von Null verschiedenem Beenden-Status 1 ab: No protocol specified\nAutolaunch error: X11 initialization failed.\n
    If I enter this command inside GNOME, everything works just fine, it locks the screen and suspends.
    EDIT:
    Setting the XAUTHORITY environment variable properly did the trick. Therefore, I borrowed some lines from here: https://wiki.archlinux.org/index.php/Su … losing_lid
    Thread marked as SOLVED again.
    Last edited by perpetrator (2011-10-17 14:25:11)

  • Why won't my iPhone vibrate anymore?

    Why won't my iPhone vibrate anymore?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • My iPhone 4 ring will not work - it just vibrates.  When I toggle the silent switch no bell comes up.  Have restored.

    my iPhone 4 ring will not work - it just vibrates.  When I toggle the silent switch no bell comes up.  Have restored.

    Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
    As per the forum term of service you can't get help here.  Use google.
    that's the downfall of jailbreaking your phone.

  • Camera sound is there even when device is in silent mode ?

    Camera sound is there even when device is in silent mode?

    Possibly. It depends on what country the phone is from. In some countries, phones are required to make a shutter noise even in silent mode.

  • My 8900 doesn't vibrate well when set to vibrate.

    Hello,
    Me and a friend both have the 8900. When we are at work we both set our phones to vibrate. When her's rings and is on her desk, you hear this very loud vibration and can hear the phone basically tapping the desk for tack of better words. When mine goes off you can't even hear it or notice it. It basically is on silent or when is in my hands I just feel this pulse.
    I have gone into my advanced profiles and the settings are all the same on my phone for sms text, mms text, phone, etc I am wondering if I am missing something here as to why hers can be so noticable when it vibrates and mine is not.

    It's an iPhone 4S running 5.1.1  Did a software upgrade last weekend. 

  • IDVD '08 doesn't respond anymore when trying to browse the media files

    I created a new project, selected a theme and then clicked "Media" to drop the Media files into my DVD project. For some reason, after that, iDVD doesn't respond anymore. I see no disk activity (with iostat) and I see iDVD consuming a lot of CPU cycles (with top) .
    Any idea why this might be happening? It is getting a bit frustrating.

    tell us about the content you are trying to use within iDvd'08.
    Might you have any Non-standard QT plugins on your mac (ie, Perian or Divx)?
    also tell us how much available hard drive space is remaining on the boot volume / your main HD.
    Take a look in your console log /crash reports and post the info on this forum.
    apple > about this mac > more info > Software > Logs
    http://docs.info.apple.com/article.html?artnum=302988
    http://discussions.apple.com/thread.jspa?messageID=6682333&#6682333
    Message was edited by: SDMacuser

  • Iphone 5 doesn't vibrate anymore

    I've had my i5 for five months now, and about three months ago, it started having an issue with the vibrate when on silent. At first I didn't notice too much as it seemed to only do it randomly, but now my i5 no longer vibrates at all. At first it was just when it was on silent, but now its all the time. I have read some forums about setting a custom vibrate, or doing a hard reset on the phone which I have done but nothing works. What else can I do, other than going and spending two hours at an Apple store? I haven't downloaded the newest update, but I know that has nothing to do with it because I have downloaded other updates and it has not helped so far to date. Anybody who has any suggestions, ideas, or the same problem with a resolution is appreciated!

    Thanks Resno, this was it for me.  It's confusing that there can be two ways to turn off vibrate while phone is silent; Apple might consider referencing one from the other...
    And while I was there I learned about the custom vibrate tone!  Shave-and-a-haircut-two-bits for my friends!

  • When phone is on silent mode, my vibrate feature is not working....any suggestions?

    When I put my phone on silent mode, the vibrate feature is not longer working....any suggestions?

    If it's a software issue and your settings are correct then the next step would be to restore your phone to new. Use iTunes to restore your iOS device to factory settings If it's the switch itself then try moving it back and forth several times. Perhaps there's a bit of pocket lint or dirt preventing a good contact. If that doesn't work then you'll have to take the phone into an authorized Apple repair centre or Apple store and have it checked out.

  • Logic Pro 9 why am I hearing the last take when I'm in cycle mode and trying to produce multiple takes?

    Hi all,
    More questions about recording in Logic Pro 9.  Just wondered...is it called cycle mode when I have an area I want to record multiple takes at?  And, why am I hearing the last take when it is cycling at take 2, 3 etc.?  Please reply.  Thank you.
    David

    Have a look here:
    http://youtu.be/e5PbrWJrq4k
    ......and here:
    http://youtu.be/M_SUrJRuENw
    Have a nice day!

  • Why can't I select Disk Utility when I start in recovery mode?

    Disk utility varification of HD detects requirement for repair and directs recovery mode startup.  When I startup in recovery mode I cannot select Disk Utility or any of the other options.  Likewise, I cannot select File, Edit, or any other options across the top of the screen?  Any ideas?

    The menu comes up, but I can't select any of the options or the continue button.  I can move the arrow by moving my finger on the touch pad, but nothing is touch sensitive. 
    The menu box has a blue line around the inside of it when it comes up, as though it has been selected.  I'm not at means anything.

  • Stop phone vibrating when receiving emails in silent mode

    Hi,
    I have an iphone 4 and the iOS5 update. 
    I mainly have my phone switched to silent mode which is fine for receiving texts and calls as I prefer it to vibrate, but how can I stop it vibrating every time I receive an email without disabling silent mode?
    Thanks

    If I remember correctly, Apple has been experimenting with the vibrate-for-emails feature in the iOS 5 betas. The phone would vibrate for new email message on one beta and they'd drop it again for the next. Seems like it has made its way to the final iOS 5 and thus you won't be able to disable it selectively. One alternative, though not really a good solution, is to check for new mail manually and not have the phone do that for you on an intervall or via push.
    Sebastian.

  • Error when running netca in silent mode

    I found a type-o in Oracle's documentation for running netca in silent mode. See link:
    http://download-west.oracle.com/docs/html/B10811_05/app_nonint.htm#BABJFJID
    There is a line that reads:
    $ORACLE_HOME/bin/netca /silent /responsefile=/local_dir/netca.rsp
    However, it should read:
    $ORACLE_HOME/bin/netca /silent /responsefile /local_dir/netca.rsp
    Hope this saves you all lots of headaches!
    --Julie Johnson

    user8909477 wrote:
    i am running netca command in linuxGreat. But WHICH Linux???? Surprisingly it makes a difference. Just like asking to talk to a person, and specifying by family name, you might get the mother, the father, the son - and each might give a different response.
    >
    in /u01/oracle/TEST/db/tech_st/11.1.0/network/admin
    i am going to TCPs litener with port 2484.
    following error is appeared
    so please Guide me to solve this problem.
    Oracle Net Services Configuration:
    Xlib: connection to ":0.0" refused by server
    Xlib: No protocol specified
    Are you logging on as root? Are you SU'ing to Oracle or trying to run as riit?
    Try logging out - all the way out. Don't stop there, you need to log ALL the way out.
    And then log in as user Oracle.
    Logging in as root causes all sorts of headaches. Only SU to root, and then only when you absolutely need it.
    Now that you have logged out of root, and logged in (not just su'd) to oracle, what happens??

  • Ringer volume stays off when coming out of silent mode

    Hi,
    When I turn the ringer volume back on after having it in silent mode the ringer volume stays at zero and I have to manually turn it back up!
    Any ideas?
    Ta

    I had same question.  Looks like no one can help us

Maybe you are looking for

  • Como usar o compo de inf. adicionais do projeto acbr (infAdFisco e infCpl)?

    Como usar o compo de informações adicionais do projeto acbr (infAdFisco e infCpl) ? A estrutura é simples. O problema é que esse campo não veio no arquivo de demonstração, aí, não dá pra usar. E aí???

  • Lightroom 5.2RC Screen Flicker in Library Grid Mode

    Hi, Having a screen flicker problem since 5.cRC came out, but only in Library/Grid mode when scrolling or selecting from the grid. But only when there are more images than can fit on one page in the grid.  Seems to use an unusually low amount of memo

  • Regarding Invoice Detail SMS to customer through ABAP program

    Hi  All ,                How can i send details of invoice ( invoice number,quantity,amount,total ledger balance of customer)  through SMS to customer with ABAP application program. please provide some sample code for this . Thanks & Regards shailesh

  • Time Machine Slow Backup

    I use Time Machine to backup to a G-Technologies 4TB external HD.  The backup is extremely slow, many times saying it will take 69,000 days to back up.  I have almost a TB to backup.  The G-Technology HD will go off line.  I'm not sure if this is a H

  • Embedded OC4J broken on Mac OS X

    I've now installed JDeveloper on two separate machines; one a Powerbook G4, and the other an iMac G5. Even when not using a data connection (let's say you just want to see a .jsp page), the following error is generated when starting up the embedded O