Why my iphoto could not ope, I have the minimac ??

Please help, i have no idea why i could not open my iphoto? I know i have a lot of pictures in it, not sure if it was full??

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

Similar Messages

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo "IMG_5965.JPG" could not be opened, because the original item cannot be found. Help?

I am trying to download photos from my camera to iphoto on my mac book (which I have done many times before). This time I am getting an alert that saysThe photo “IMG_5965.JPG” could not be opened, because the original item cannot be found. How can I fix this?

There is a fair likelihood of an explanation of this symptom
in another ASC discussion thread; see the reply by léonie:
https://discussions.apple.com/message/20165563#20165563
You may have to research any newer possibilities in trouble-
shooting or resolving issues by use of iPhoto Support page.
Since I don't use iPhoto as a primary editor or storage, the
details on the topic aren't so good. I prefer ToyViewer editor.
•iPhoto Support
•iPhoto Video Tutorials
Hopefully the error is easily corrected.
Good luck & happy computing!

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

I have pre 08 iphotos saved on disk. When I try and open the disk in I photo on macbook pro I get the following message Unreadable file, The following file could not be imported.(The file is in an unrecognized format)

Here's a test you can run:
1 - copy a set of photos from the disk to a folder on the desktop.
2 - download and unzip the Automator workflow Convert to JPG and Embed sRGB profile. You can download it from Toad's Cellar.
3 - select the files in the folder and drag and drop onto the workflow app.
4 - try to import the resulting files.
OT

This is a new notification coming up with iTunes, why and how do I fix it? The song "Penny Lane" could not be used because the original file could not be found. Would you like to locate it?

This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
Max

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

Why is it that every udate of my iPhone software do I get the error message on my laptop: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

11.2 iTunes update has made me unable to open iTunes. It says "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" I have done everything imaginable! Please help?!

I deleted, reinstalled, searched, enabled, disabled--EVERYTHING and yet iTunes will not open! This is exactly why I hate updates rom Apple because they do this time and time again. I deleted multiple .dll files and nothing has worked. This is a glitch from the newest update 11.2. It says: "The procedure entry point ADiAdID_AquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll" and I have no idea what the heck that means!
If there is anybody that is having similar issues and know of what the issue might be, please help =[
Thanks.

Hi, Did you strip out all components, delete the named folders and reboot as in the second box of Troubleshooting issues with iTunes for Windows updates?
Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
Size 3,004 KB
Created 8th May 2014
Modified 8th May 2014
File Version 1.0.0.1
Product Version 1.0.0.1
I'll try to get a look at 64-bit system later to confirm the correct path.
tt2

IPhoto The library could not be opened because the file system of the library's volume is unsupported.

Have Yosemite installed on both my MBA and Mac Pro. iPhoto 9.0 running well on the MBA but when I tried opening iPhoto on my Mac pro get the message "The library could not be opened because the file system of the library's volume is unsupported." This is after I upgraded iPhoto.
Any help would be greatly appreciated.

While holding down the command & option keys boot into iPhoto and have it repair the Library. If that does not work then download "Library Manager" and have that program work. I found that better than the Apple program.

The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site

I am trying to load any 9.0.3 firmware on my UCM 5.0.4.2000-1 server. Every newer firmware I load throws the following error. I have verified the MD5 is correct and also downloaded the file several times with the same result. I can load the same firmware file on another UCM server and it loads fine. Any ideas?
Thanks in advance!
Error Message:
The selected signed file could not be authenticated. The file might have been tampered with or an error might have occured during download. Please verify the MD5 hash value against the Cisco Systems web site: 9b:b6:31:09:18:15:e7:c0:97:9f:e6:fe:9a:19:94:99
Firmware File: cmterm-7970_7971-sccp.9-0-3.cop.sgn
UCM version: 5.0.4.2000-1

Thanks for your reply. We have a lab environment where I maintain UCM 5.0, 5.1, 6.0, 6.1, 7.0, 7.1 and 8.0 servers each running the latest released firmware for our QA testing team. I have downloaded and installed the latest device packages but find that if I try to install any firmware newer then 8.3.1 on either 5.0.4 or 6.0 i start getting MD5 hash authentication errors. It looks like 9.0.3 firmware should work on UCM 5.0 and 6.0 so I am lost as to why I can't seem to update any firmware for any model phone if it is newer then version 8.3.1 on either 5.0 or 6.0. while 5.1 and 6.1 work without issues. Maybe it is just a bug. I mostly wanted to see if anyone else has experienced this or if it is just me.

Iphoto update "The photo "X" could not be opened, because the original item cannot be found."

Updating iphoto and get the Alert "The photo “X” could not be opened, because the original item cannot be found." Which is because I have archived thousands of photos offline. I can't go through the entire list one by one hitting the "cancel" button, but iPhoto apparently won't update unless this is done. Is there a way to skip this step? I can't run iPhoto at all with the alert live.
Mac OS X 10.9.2

Do you have a referenced library (The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended.
If so then your only choice is to restore the originals back to the exact path they had when you imported them or to rebuild your library using iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - without them
LN

Why i receive errors: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"

Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?

You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM.

TS1718 Why do I get this message: The song "title" could not be used because the oringinal file could not be found. Would you like to locate it?

Why do I get this message: The song "title" could not be used because the oringinal file could not be found. Would you like to locate it?

John Black3 wrote:
Many of my songs in my iTunes Library no longer play. I get this error message: "The song xxx could not be used because the original file could not be found. Would you like to locate it?
this usually happens when a user moves or deletes files in the finder - a sure way to upset iTunes.
did you move or delete files in the finder ?
I cannot locate the song.
if you let iTunes manage your library, all your content will be in <MacintoshHD>/users/<yourname>/music/iTunes/iTunes music (or media)/music. did you look there ? tried a spotlight search ?
if the files are really gone, and have been purchased from the iTunes store, see Downloading past purchases from the App Store, iBookstore, and iTunes Store.

Iphoto could not be connected to photo stream

hello
iphoto could not be connected to photo stream

Hello Adams Apple,
Generally the (0xE8000001) error results from USB timing issues. You mentioned that you're running a PowerBook G4. Does it have USB 2.0?
Open the USB section under Hardware in System Profiler. Do any of the USB devices listed in the USB tree indicate 480Mb/Sec? If the PowerBook is equipped with USB 2.0 ports, resetting power management on the PowerBook may reset the USB ports and as a result, resolve the error:
http://support.apple.com/kb/HT1431
If the PowerBook does not have USB 2.0 ports, it may be time to migrate your iTunes Library to the MacBook:
http://support.apple.com/kb/HT1329
While the article is written for using an iPod to move the library, the information from the "Copy iTunes folder to iPod" step on down would apply to any external storage device. Just substitute your storage method wherever it mentions iPod.
Charles H.

When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnm

You may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Library Lost - Please HeIp I tried updating my old ipod & now all 10,000 songs in my library have an ! next to them and I get the error message "song " " could not be used because the original file could not be found" on every song I try to play

Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

Why my iphoto could not ope, I have the minimac ??

Similar Messages

Maybe you are looking for