Why my itunes can't detect application

why my itunes can't detect application

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Similar Messages

  • HT201269 Why the new iTunes can't detect any of my devices(iPhone & iPad)?

    Why when I connect my iPhone or iPad the new iTunes can't detect it?

    Well, you do not indicate what computer operating system you use, so here are the support documents for both. Choose the one that applies to you.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • HT1386 iTunes can't detect my iPhone

    iTunes can't detect my iPhone.. there is no such option "iPhone" beside the "iTunes store". I already installed the latest version but still don't work.

    Ok that is not the latest verison 11.1 is..you nees to go to iTunes.com, then tap download itunes near top roght area then on the next screen tap download now and then run the program after then install all togethor should take about 15mins but you should fine..let me know if solves it for you

  • Why my itunes can't link to the itunes store?  my internet is functional.

    why my itunes can't link to the itunes store?  my internet is functional.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Itunes can't detect my phone

    Hi
    I recently updated my iPhone to iOS7 and know iTunes can't detect my iPhone. I have Windows 8 (64bit). I have tried everything! Can anybody help.
    Thanks

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • ITunes can't detect my iPad Mini. Please help :(

    Please help!
    My iTunes can't detect my iPad, but it's normally connected to my PC.
    I've already had my iOS 8 and upgraded iTunes to 11.4.
    I did anything I can to fix this problem but iTunes just can't detect it. I've already searched everything to fix this. Ugh, I'm so frustrated. please help me

    Hi Gracegb,
    I'm not sure which steps in this article you've tried other than updating software, but please check it out.
    iOS: Device not recognized in iTunes for Windows
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Why itunes can't detect my iphone 3GS?

    Why can't my itunes detect my iphone 3GS device on my laptop, but when I charge my brothers iphone on my laptop itunes can detect their iphones devices but not mine??? Any ideas on how to fix this??

    I can't turn on my iPhone 3Gs after charged with iPad 2 charger........ How ? Pls help.....even I hv tried to press power button together home button......!

  • Why ipad iphoto can't detect picture exif data?

    Hi
    I want to ask, why iphoto in ipad can't detect exif data of my picture?
    But while using the same picture in another aplication photogene for ipad, it can detect the exif data?
    Thank you
    Kindo

    Thank you criticacid12,
    I would like if i can get the original size of all my edited photos :-) do you?
    I can get the  non edited original size by plugging the camera to computer with the faster speed 2x or 3x or maybe 4x than sending it from itunes.)
    I have make a request from feedback, let us all make feed back request all others fiture that we want :-)
    You can send feedback to Apple here
    http://www.apple.com/feedback/iphoto_ios.html
    Thank you

  • Windows 8 and itunes can not detect itouch

    I have windows 8 and itunes will not detect my itouch?   Any tips?

    Chris CA, I am having the same problem. I actually just purchased a brand new laptop (w/ Windows 8 already installed) and had to download itunes latest version (ver. 11) and am having the same problems. As my itunes seems compatible with my Windows 8, my itouch device can not be recognized by itunes or in the "my computer" folder.
    perhaps this more of a windows 8 issue and not an itunes issue?
    PS, i have OS4 on my itouch, could this be a problem as well?
    Thanks!
    Petit

  • Itune can't detect iphone 6 plus on wifi sync

    iTunes 12.0.1.26
    Macbook Pro Retina, 13 inch, late 2013, OS X Yosemite 10.10.1
    iPhone 6 plus 64 GB, iOS 8.1.1
    iPad 2 64 GB, iOS 8.1.1
    Both Wifi and Bluetooth turned on.
    When iTunes launched, iPad2 is detected within 10 sec, whereas iPhone 6+ is not detected.
    I can still detect iPhone for personal hotspot and handoff.
    Of note, the continuity feature on Macbook Pro is not consistent - message does show up but not phone calls.
    I tried restarting both devices, deactivating and activating the handoff features etc.
    It never worked for me. When I bought iPhone it was already running iOS 8.1. Upgraded to 8.1.1 only few days ago.
    Kind regards.

    Hi there ing soo,
    I would recommend taking a look at the troubleshooting steps for Wi-Fi syncing found in the article below. 
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    -Griff W.

  • HT1414 my ipod touch in white screen when i connect to the itunes can'tbe detected

    my ipod touch in white screen when i connect to the itunes can'tbe detected

    If not sucessful try:
    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Got a new shuffle, now iTunes can't detect my old Mini

    I am running iTunes 5.0.1 (Max OS X) with my iPod Mini. Yesterday I bought a Shuffle to use while running/biking. I had read it was possible to run two iPods off the same machine. I put my new Shuffle in the USB slot, after it was detected - I named it and filled it up with some songs from my existing iTunes library and it works fine. The only problem now is iTunes no longer detects my iPod Mini anymore when i connect it via Firwire. Same deal even when i eject & unplug the shuffle and re-attach the Mini. I've tried updating software, re-starting etc. still no success. Any advice or is this a hopeless cause?

    Try calling AppleCare at 1-800-APL-CARE and try to reset your password to you old AppleID through them, Give them your MacBook Pro's serial number to avoid having to pay for phone support. You may have run out of options to reset your password youself, but they may be able to override you hacker's attempt to keep you out by having you verify billing info stored on the old Apple ID. Any content purchased with that old Apple ID will have to be authorized for playback on your new MacBook Pro with the original Apple ID and password that was used to purchase said content. To my knowledge there is currently no way of transfering ownership of content from one AppleID to another, however after you get your old Apple ID sorted out, you may be able to change the main email to one of your own and change your password to one thats tough to crack to avoid going through this terrible experience again.
    Hope that helps :-)

  • Why my laptop can't detect my Ipad2 which was earlier connected to Iphone 4S?

    My laptop was connected to Iphone 4S. Can i still connect to my Ipad2 and transfer the file over?

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • IPhone 4S stuck in connect to iTunes screen, iTunes can't detect it

    I tried restoring my iPhone and my computer froze during the restoration. the iPhone is stuck on the connect to iTunes screen and isn't recognized by the computer when I plug it in.
    What can I do to fix it? I'll definitely be needing my phone in the next few days and need it fixed ASAP!
    Can anyone help me please??

    yes, just to say a big thank you to Apple ...realizing today while browsing these forums that I haven't been the only one. Happened to me when I updated from 8.1.2 to 8.1.3 OTA... device (iPhone 4s) stuck in recovery mode ... how nice, this has never ever happened to me after years of using iOS, whether I updated OTA or via iTunes, never. I was then delighted to experience the restore process ... wasted hours doing that thanks again ! (I have many apps and a big backup so...). Seriously, this is unacceptable.

  • Why my itunes did not detect device?? pls help

    My iphone 4s always restart all the time why?/

    Put the device in DFU mode (google it) and restore.

Maybe you are looking for

  • ITunes will no longer write to my CD/DVD writer

    I put in a blank CD-R and iTunes tries to read it, then ejects it and say insert a blank CD. Diagnostics report says it's a chip issue?? Only iTunes is having an issue. If I put in a CD-R that is already written to, then iTunes can read it fine and c

  • HDMI mirroring no longer works on 10.8.4

    Tried to watch a movie on the big screen (two, actually) tonight on my MacBook Pro with Retina Display, but was surprised to learn this couldn't happen. I've owned the computer for roughly eight months now, and HDMI mirroring always worked without a

  • Upgrading from 10.4.11 to Snow Leopard - Questions needing answers..

    Hello, I am currently running Tiger, 10.4.11 on my MacBook and want to get it up to current Snow Leopard. My laptop is about 4 years old now and need to know if I can upgrade it. Secondly I tried to install it with the Leopard system software I recei

  • Issue with payment of terms

    Hi , I am using Basic type ORDERS05 , Message Type ORDERS and for processing FM IDOC_INPUT_ORDERS. I expect the sales orders to give the same data when the IDOC's are the same and the customer master data is the same, but we have a concern with some

  • Which is better of MANY_TO_ONE and ONE_TO_MANY

    I am trying je. A little confuse is , that suppose A has one_to_many relation to B, then B can have many_to_one relation to A. And both solution is acceptable to my application. Which should I choose?