Why my itunes connot detect my iphone5

why my itunes cannot detect my iphone 5, please help....

Use this article: iOS: Device not recognized in iTunes for Windows - Support - Apple

Similar Messages

  • HT1212 why will itunes not detect my ipad

    why will iTunes not detect my iPad

    - try another cable
    - try another usb port
    - make sure iTunes is up to date
    For further troubleshooting steps follow the article below based on your computers operating system:
    iOS: Device not recognized in iTunes for Windows
    iOS: Device not recognized in iTunes for OS X

  • Can not update ios7 itunes has detected an ipad in recovery mode. why is this happening

    can not update ios7, itunes has detected ad ipad in recovery mode. why is this happening, it appears that apples answer to everyhing is to perfrom a factory reset...

    Please see: http://support.apple.com/kb/HT1808 for assistance with this issue.
    Regards,
    Steve

  • Why my itunes can't detect application

    why my itunes can't detect application

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • HT1848 when i purchase music on itunes and sync my iphone5 the new song appears twice -- one version that does not play when you click on it and another that plays. why is this happening? what can i do to remove the version that is 'fake'?

    I bought music from itunes and synced my iphone5 to get the music on it.  The problem i am having is that 2 versions of the song appear on my iphone -- one light gray 'fake' version which doesnt play when i click on it and another real version.  can anyone help why this is happening? and how i can delete the 'fake' version from my iphone?

    If that's the best you can do why don't you get on another forum?

  • I'm using ipod touch for a year now. I was using this morning and suddenly the ipod doesn't work at all maybe it got wet from my bag but there wasn't wet stuff in there. and itunes said iTunes has detected an iPod in recovery mode. please help me

    I'm using iPod touch for a year now. It was doing fine this morning but in the afternoon suddenly when I took it out of my bag, the screen was just black and it wouldn't turn on and stuff. So I thought it didn't have battery so I charged it didn't work. I plugged to the computer and it said iTunes has detected an iPod in recovery mode. You must restore this iPod before in can be used with iTunes.
    Maybe my bag was little wet today but i don't think that is why.. since it wasn't that bed.. just some paper was wet and stuff..
    What should I do..? Please help me.

    Connect to the Computer you Usually Sync with and Follow the Steps Here...
    Recovery Mode
    http://support.apple.com/kb/HT1808

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • Message rcvd: iTunes has detected an iPad in recovery mode.

    I plugged my iPad into an electrical outlet to charge it. It asked if I wanted to update. I replied yes. Now all that shows up on the screen is the image of the end of a charge cord that plugs into the iPad and an iTunes icon. Thinking that meant I should plug into the computer, I did so and got the message: iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes. I have done the restore, but want to know why this occured.

    There's no possible way anyone here could determine why this has happened to your own device as there could be one of of many possibilities.
    Electronic devices and computers some times fail

  • TS4062 everytime i try to sync my iphone 5 on itunes it states " The iphone5 cannot be synced. A duplicate file was specified. what do i do

    everytime i try to sync on itunes the message "The iphone5 cannot be synced. A duplicate file name was specified" what do i do to rectify this?

    Hi giggle chops,
    Welcome to the Support Communities!
    The article below explains why you may get this specific error message.  Follow the instructions below to disable any third-party plug-ins by opening iTunes in Safe Mode:
    iTunes: Troubleshooting issues with third-party iTunes plug-ins
    http://support.apple.com/kb/ts3430
    Symptoms
    Add-ons, such as plug-ins and scripts, not manufactured by Apple (third-party) add features to iTunes or modify its appearance and behavior. Using these can interfere with how you use iTunes. For example, if you upgrade to a newer version of iTunes, your add-ons may not be compatible.
    You see this alert while syncing: "... cannot be synced. A duplicate file name was specified."I
    I hope this information helps ....
    - Judy

  • Itunes has detected a problem with your audio configuration. audio video playback

    itunes has detected a problem with your audio configuration. audio video playback may not operate properly. Why do i get this after update cant get sound now please help!

    See if this article will help:
    iTunes for Windows plays video files without any audio
    http://support.apple.com/kb/TS1696

  • Itunes has detected a problem with your audio configuration.audio/video pla

    yback may not work properly. thats the message i'm getting who ,why ,what ,where,when. Help the stores took me cash and i cant play tracks grrrr

    Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

  • HELP! iTunes Cannot Detect iPhone~

    i am using Windows Vista with my 1.1.2 iPhone & iTunes 7.5
    iTunes cannot detect my iPhone when i plug it via the USB cable to my computer, while Vista can detect it and i can access the photos inside iPhone with the link my computer\Apple iPhone\Internal Storage\DCIM\100APPLE.
    the interesting fact is that when i turn off the "program control" (a function in my firewall, ZoneAlarm). iTunes can then detect the iPhone can they can sync(ringtones, music, contacts successfully get into iphone)!
    if i switch on the "prgram control" in zonealarm after they sync, disconnect iphone and reconnect it, an error message will be shown, something like "iTunes cannot connect to iPhone [^2], unknown error (0xE8000001)"
    if you know what happening, please HELP!!!
    thanks for your time!!!

    Obviously it's an issue with ZoneAlarm. Why not contact their support or post on their forums? May be a common problem. Or maybe look for a different firewall/security software.

  • ITunes has detected an iPod in recovery mode, constantly comes up

    I was listening to my iPod when all of a sudden, when I went to skip to the next song, it just went to the next song, but would not play. I would press the play button, the play arrow would be displayed, yet no playback started. At this point, I did a reset, pressing and holding the menu + select until the apple logo appeared. I then got the sccreen showing the usb cable wiith the mesage "connect to iTunes to restore". I then connected it to computer running the latest version of iTunes. iTunes displayed the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes". I click OK to close this window and at the iTunes main screen, select the 'restore' button. The message comes up "are you sure you want to restore...", I then selected Restore. The "Extracting software" message followed by the "restoring ipod" message came up. It then said the iPod was restored and is restarting. On the iPod, the apple logo comes up then the screen flashes white and then the screen showing the usb cable with the mesage "connect to iTunes to restore" reappears. it seems to be stuck in this loop. I changed the drive letter assigned to the iPod but that didn't make a difference. A couple months ago, I had a similiar issue where I got the message about the iPod being corrupted and I restored it and that worked fine and all was fine with the iPod after. Is this a indication of some kind of intermittant hardware problem? Has anyone else had the same issues? Any suggestions as to how to get this to work and what may have gone wrong why all of a sudden I had playback issues in the beginning? I don't know if this is coincidence or not, but I had some videos on it that I recorded earlier in the day. The time I had the corruption problem a couple of months ago, I had some video recorded on it also.

    Well, I finally got my iPod formatted and restored. I had problems on my windows XP computer in that I couldn't get the iPod formatted in Windows nor would iTunes get out of the "iPod in recovery mode" loop after numerous restore attempts.
    I did the following on my Windows Vista computer and was able to finally get the iPod to work:
    I first tried the iPod in iTunes to attempt a restore but got the same "iTunes has detected an iPod in recovery mode" error message.
    After exiting iTunes, I did a format of the iPod in Windows as follows: FAT32, cluster size 8 KB, and did a "Quick" format. Format was successful this time. Disconnected the iPod using "safely remove hardware".
    Then, restarted iTunes and reconnected the iPod. This time I was able to do a restore, name the iPod and set sync preferences and sync files to the nano.

  • My itunes doesnt detect Iphone 5

    My itunes doesnt detect Iphone 5, why... please advise....

    You can not activate it without a SIM. If it is carrier locked, the SIM must be from the carrier it is locked to.
    The SIM does not have to be tied to an active line of service, but it MUST be present.

  • HT4623 iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes

    I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
    The I got:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
    When I click restore it then says:
    "Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
    iTunes will verify the resotre with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
    I don't want to lose my media. I was never told to make a back up, I was never told the update would be this difficult.
    Can I just revert back to how it was before?

    I downloaded the update because why not. I then turned my iPad on and get the iTunes logo and a lightning cable picture. I plugged the ipad into my computer and opened iTunes.
    Then I got:
    "iTunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes"
    When I click restore it then says:
    "Are you sure you want to restore the iPad "iPad" to its factory settings? All your media and other data will be erased, and the newest version of the iPad software will be installed.
    iTunes will verify the resore with Apple. After this process is complete, you will have the option to restore your contacts, calendars, messages and other settings."
    I thought okay, I'll just erase everything then. I get error 3004 when I try to restore.
    I've tried disabling my security software, updating iTunes, replacing my hosts file and using a third party software recovery tool. Nothing works. I never thought Apple would break my iPad with an update but they managed to.
    Any solutions?
    Thank you.

Maybe you are looking for