Why my mac pro has no Arrangement? (but before i had it)

I used to connect my macpro to TV by HDMI but one day it didnt work and also I can not find Arrangement in Display
Can you please tell me "How to fix it"

Depending on which MacBook Pro you have, but I'll assume it's within the past couple of years, then you need an MiniDisplayPort to HDMI connector.  Here's one in the Apple Store.  I'm sure you can find others at Best Buy and/or Amazon.

Similar Messages

  • HT1222 I was trying to run ITunes 10.7 update on my Mac Pro with Retina display but the message appeared "An error has occurred" so I can proceed with the update. I dont' see any other messages. Any ideas what could go wrong?

    I was trying to run ITunes 10.7 update on my Mac Pro with Retina dispaly but "An error has occurred" and I was not able to proceed with the update. The message says "The operation was cancelled. (3072)." I have no other messages. Any ideas why I cannot install this update

    Scott's solution fixed the problem.  It would have been helpful if the update message in the App Store had reported that.  I had first tried B Noir's solution -- and received a helpful warning message that a guest user was still logged in to iTunes.  I switched over, logged the guest user out, switched back and the update within the App store worked perfectly.
    It seems to me that Apple should invest a little time and effort in making their error/warning messages easier to decipher.  I have to come to the forum every time something happens.  Why not simply have a dialogue window that opens up to explain the most likely issues?

  • Mac Pro has slowed to a crawl - Please Help Me!

    Hello,
    For some time now my Wireless or Wired Internet connection using my Mac Pro has slowed to almost nothing. For example, This page took 5 mins to load and now Internet use has become unusable.
    I feel its my Mac Pro because all other Apple Computer run very fast wirelessly. I have (2) New iMac's (1) Apple TV and (1) Apple iPhone. All stream and surf the Internet blazingly fast.
    My Mac Pro is constantly being redirected to other sites (mostly **** related) and a huge amount of Pop ups (even though pop ads are disabled in Safari). All Internet browsers perform the same on my Mac Pro or ANYTHING Internet related including WoW, Software updates or even iTunes Music Down loads.
    I really feel that in some way (which is shocking) I am infected with "something" that is making my computer crawl on the Internet. Redirection of websites is just now very aggravating.
    I am looking at the (2) Original Disks that came inside the Mac Pro Box. I'm seriously considering wiping my system clean and starting from scratch.
    I currently hold NOTHING on my Factory 320GB HD other than programs.
    I have installed (2) 1TB drives and created a RAID slice thus creating a single HD icon on my desktop that reads 1.8TB. Thats is where all my Music, Photos, and Movies reside.
    My question is....
    When I wipe my system will that RAID be broken? Will I lose everything on those 2 drives or will using the restore CD's leave all that information in tact?
    Please let me know before I proceed.
    Thank you for your time.
    John

    Your RAID won't be touched. But back it up today if you haven't yet!
    I use Firefox for security with noscript and some other filters, but I also hardened the router firewall to manually block services, ports and add rules - both incoming and outgoing.
    You might want to look at LittleSnitch or NetBarrier and do some logging.
    I've seen/heard where older routers and modems were fine, but not with Mac Pro or with Intel Macs in general and needed to be replaced or firmware updated. Problems with the latest updates for Airport have been seen by some, and worth checking into - on forums, news sites or hit google.
    And of course check what processes are getting loaded and run; manually delete caches, history, metadata, even the bookmarks cache.
    ~/Library/Caches/Metadata
    There are issues with fake Flash updates; normal sites (like CNN) suffering from SQL-injection. Best to run with javascript off for now.
    Might want to look into ClamXav and other malware protection. But I would switch and see how Firefox and Opera behave. And turn off java, script, and plug-ins while you consider your options and try to find out why.

  • My mac pro has died, how can I see my emails on my macbook

    My Mac Pro has died. I intend to get it repaired, obviously, but I need to see my emails from the many years of emails archived on its undamaged hard drive. I have removed the hard drive and connected it to my macbook using a USB carrier. I can find myself under the users, but the library file where the mail folder is kept remains hidden, so I can't copy it across.
    What can I do to get my emails useable again immediately?
    I posted this before but on a Macbook discussion and got no useful reply.
    It surely is possible to do this isn't it?

    In Finder select Go, then hold the option key.
    You will now see Library.  Select it and navigate to Mail. 
    emails are in V2 Folder
    See eric's suggestion to "check ’Show Library Folder’"
    f1eng wrote:
    What can I do to get my emails useable again immediately?
    To keep it seperate from the Mail already on this Mac, I would set up another user account (->System Preferences->Users & Accounts), and then log into the new account.  Quit Mail, Delete ~/Library/Mail in the new account and copy Mail from the other Mac.
    Delete these files to force a re-index:
    Open Mail

  • Early 2008 mac pro has an infrared sensor?

    early 2008 mac pro has an infrared sensor?

    okay-what, am I a salesperson now? dunno why you can't google it yourself, or get me a job doing this (just kidding--sorta)
    anyways, you could try either twistedmelon or a bluetooth presentation remote (targus or Kensington,maybe logitech.
    I think i've done enough here....just fyi, bluetooth on a mac pro desktop isn't great....
    getting a dongle for that might be helpful.....
    John B

  • Why my Mac Pro hard drive noise and too slow?

    Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

    Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
    A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
    http://scsc-online.com
    They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
    I could probably think up 20 or 30 more if needed.

  • Mac Pro has a DVI or a DVI-D connector? What is the difference?

    First of all i am really happy with my Mac Pro, thanks Apple!
    Until now i had a old 15 lcd screen, because i could not afford a new one after buying my new Mac Pro.
    Now i have enough money to buy 2 17 or 19 inch screens! But i have some trouble with selecting the right one.
    I the past i had bought a AGP graphic card (for my G4) with a DVI-D connector. After that i found that it was not possible to connect my "normal DVI" screen too it. So i have to get another graphic card.
    So, what connector does my mac pro have? (NVIDIA GeForce 7300 GT)
    The specs off the Mac Pro says it has only a DVI connector, not DVI-D, or is it just the same?
    I was thinking of one off these models:
    - Iiyama ProLite E1700S-B2
    --> has a DVI-D connector
    - LG Flatron L1752HM-SF
    --> has a DVI-D connector
    - Iiyama ProLite E481S-W3
    --> has a DVI-D connector
    Can i connect all these screens to my Mac Pro using DVI-D?
    Are there any screens you would specially advice me? I like Samsung, Iiyama or LG. There is no need for really good screens, i am not a video editor or a graphic designer. The screens has te be "relax" for my eyes!
    I know it is possible to connect all the screens by converting DVI to VGA, but if it is possible i would prefer to connect it direct by DVI.
    Sorry for my quite bad english, and thanks in advance for all your help!

    I just puchased a LG226WT and it too has a DVI-D
    input. So what I understand I can go from the Mac Pro
    2.66 to this monitor using simply a DVI-D cable,
    right, therefore not having use of Analog. Newbie
    question... What is the Analog part of it all?
    The analog pins alow the use of a CRT, or other VGA display via a DVI to VGA adapter. ATI boards also use the analog pins for DVI to video adapters.

  • My Mac Pro has a 10.5.8 version, I need to upgrade to 10.6 to be able to upgrade to OS Lion and other programs that require 10.6 or newer

    My Mac Pro has a 10.5.8 version, I need to upgrade to 10.6 to be able to upgrade to OS Lion and other programs that require 10.6 or newer

    It's not your wording that's at issue. It's the incorrect information you provided. Go back and read my reply.
    I'm sorry but I can't help your mis-wording. I can only make sense from what you have written. Your location is the UK so I must assume English is your first language without other information to go by.
    If you wrote the same thing a hundred times in one day, then you'd use copy and paste, too. So don't insult those of us who do.

  • Why my mac pro did not have iphoto software

    why my mac pro did not have iphoto software

    It could be that you haven't set up your machine properly. Or it could be just a mistake. But since you give us no information - heck, you don't even give us punctuation - how on earth could we know?

  • I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

    If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

  • Memory Leak in Mac Pro.  My Mac Pro has 16 GB memory

    The memory (as shown in the Activity Monitor) goes from a high of approximately 11 GB free memory to a low of approximately 50 MB.  The leaked memory seems to be going to "Inactive".  When the memory is on the low end, the Mac Pro is very slow, sometimes freezing for several seconds.  Does anyone know what the problem could be?

    An update to my original discussion message.  Now the Mac Pro has some extreme lag times when accessing programs, deleting files, copying files, etc.  This occurs even when the free memory as shown in the Activity Monitor is high (over 8 GB).  If anyone has an idea of how to correct this problem, please let me know.

  • I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I urgently need to know how I can connect 8 thunderbolt display, I was thinking with the new mac pro will come out, but I wonder if it is possible to connect an iMac to 4GB of graphics card, but suffers from the imac. thanks

    I tightened all HD screws and it didn't help. With the machine running and side of the case off, I physically stopped both the video card fan and the front case fan with my finger for a couple seconds and the noise continued. I also took all hard drives out one by one and rebooted each time. Again, the noise continued until I took out the Mac HD in Bay 1, rebooted, and I had a very quiet, silent machine. The issue is the hard drive in bay 1 that shipped with the computer, it's without a doubt causing the hum/woosh sound. I still need to know if I can safely swap the Mac HD from bay 1 to bay 4 without any issues to the operating system. I would like to try that to see if it dampens the noise but I also want to make sure this swap won't screw up my machine at all.

  • We recently had a few brief power failures. Since then, my Mac Pro has been very slow on start up. Any suggestions?

    We Recently had a few brief power failures. Since then, my Mac Pro has been very slow on startup. Any suggestions?

    Like the  man says:
    Run Disk Utility > Repair ... (not just repair permissions) while booted from another drive. If you have a stronger utility like Disk Warrior, that would be even better.
    If you find that the ONLY way you can do this is by booting from the DVD, The Hatter recommends you establish an emergency drive or partition on a drive other than the Boot drive and use that in the future. It makes emergency Repair, backup, and cloning much easier.

  • HT1338 Wish to upgrade from SL to ML on Mac Pro. Spec says only on Mac Pros from early 2008 but unsure how old my Mac Pro is as it is from work. How do I find out if ok to upgrade to ML?

    Wish to upgrade from SL to ML on Mac Pro. Spec says only on Mac Pros from early 2008 but unsure how old my Mac Pro is as it is from work and there are no records. How do I find out if ok to upgrade to ML?

    You can write to Apple with the serial number and they can tell you exactly when your MacPro (as opposed to Mac Book Pro) was manufactured.
    And in the Apple menu > about this Mac >  more info > there should be sufficient detail to narrow it down.
    EDIT.  These are the specs for the      April 2007 version.
    "Suggested"
    "Best"
    Speed of Xeon Processors:
    Dual Core 2.66 GHz x2
    Quad Core 3.0 GHz x2
    Memory:
    1.0 GB
    2.0 GB
    Video Card:
    NVIDIA GeForce 7300 GT
    ATI Radeon X1900 XT
    Video Memory:
    256 MB
    512 MB
    Hard Drive Capacity:
    250 GB
    500 GB
    Optical Drive:
    16X "SuperDrive"
    16X "SuperDrive"
    Price:

  • Mac Pro has started crashing

    Hello! 
    My wifes' Mac Pro has begun to crash regularly, and it seems more frequently as well.  Here are its' charachteristics:
      Model Name:    Mac Pro
      Model Identifier:    MacPro1,1
      Processor Name:    Dual-Core Intel Xeon
      Processor Speed:    2.66 GHz
      Number Of Processors:    2
      Total Number Of Cores:    4
      L2 Cache (per processor):    4 MB
      Memory:    8 GB
      Bus Speed:    1.33 GHz
      Boot ROM Version:    MP11.005D.B00
      SMC Version (system):    1.7f10
    This is the error message we got from the last crash:
    Interval Since Last Panic Report:  4966 sec
    Panics Since Last Report:          3
    Anonymous UUID:                   EE5B3521-7030-4A20-BBEC-A7502FDB06E7
    Mon Oct  3 13:10:342011
    Machine-check capabilities (cpu 1) 0x0000000000000006:
    family: 6 model: 15stepping: 6 microcode: 198
    Intel(R) Xeon(R)CPU            5150  @ 2.66GHz
    6 error-reportingbanks
    Machine-check status 0x0000000000000005:
    restart IP valid
    machine-check inprogress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401):0xb200004000000800 valid
      MCA error code:            0x0800
      Model specific errorcode: 0x0000
      Otherinformation:         0x00000040
      Status bits:
       Processor contextcorrupt
       Error enabled
       Uncorrected error
    IA32_MC1_STATUS(0x405): 0x0000000000000000invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000invalid
    IA32_MC3_STATUS(0x40d): 0x0020000000000000invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000011invalid
    IA32_MC5_STATUS(0x415): 0xb200121020080400valid
      MCA error code:            0x0400
      Model specific errorcode: 0x2008
      Otherinformation:         0x00001210
      Status bits:
       Processor contextcorrupt
       Error enabled
       Uncorrected error
    panic(cpu 1 caller 0x2aaf41): Machine Check at 0x013d65f9,thread:0xe0173d4, trapno:0x12, err:0x0,registers:
    CR0: 0x8001003b, CR2: 0x7d4fb000, CR3: 0x00100000, CR4:0x00000660
    EAX: 0x00000000, EBX: 0x0d61fec0, ECX: 0x00000001, EDX:0x013e88e0
    ESP: 0x8368bbd0, EBP: 0x8368bc18, ESI: 0x013e8c28, EDI:0x0d5d8000
    EFL: 0x00000006, EIP: 0x013d65f9
    Backtrace (CPU 1), Frame : Return Address (4 potential argson stack)
    0x7c3b2fb8 : 0x21b837 (0x5dd7fc 0x7c3b2fec 0x223ce1 0x0)
    0x7c3b3008 : 0x2aaf41 (0x59dfe4 0x59e0d1 0x13d65f90xe0173d4)
    0x7c3b30f8 : 0x2a29f2 (0x1 0x38000a 0xeac02533 0x30301b)
    0x8368bc18 : 0x13ceee7 (0x7c3550a8 0x1 0xd5d8000 0x0)
    0x8368bcf8 : 0x13d0850 (0xffffffff 0x7fffffff 0x0 0x0)
    0x8368bdf8 : 0x2ad0c5 (0xffffffff 0x7fffffff 0x8368be380x7c35e000)
    0x8368be18 : 0x225bba (0x7c35e49c 0x74f0d1e6 0x6 0x7c35e488)
    0x8368be78 : 0x22698c (0x1 0xe0173d4 0xd620884 0x12538fe)
    0x8368bee8 : 0x2275b0 (0xe0173f0 0x0 0x1 0x506ad1)
    0x8368bf58 : 0x227631 (0x23014c 0x863ea0 0x0 0x2a45c9)
    0x8368bf78 : 0x2302e6 (0x23014c 0x863ea0 0x0 0x0)
    0x8368bfc8 : 0x2a179c (0x863ea0 0x0 0x10 0x0)
          Kernel Extensionsin backtrace (with dependencies):
            com.apple.driver.AppleIntelCPUPowerManagement(142.6.0)@0x13cd000->0x13f0fff
    BSD process name corresponding to current thread:kernel_task
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011;root:xnu-1504.15.3~1/RELEASE_I386
    System model name: MacPro1,1 (Mac-F4208DC8)
    Any idea what may be causing this?
    Thanks for any help!

    try runniing Apple hardware test
    reseat risers and dimms
    test wtih half memory
    do not use your normal system for now - it is probably corrupt and can lead to more issues
    try a clean system w/o any 3rd party anything, divers, cables, devices
    rather common for fb-dimms to fail and go bad, luck, other than apple, they carry lifetime warranties

Maybe you are looking for

  • Prevent PO item from beeing changed after goods receipt or invoice receipt

    Hi all, Users had the good idea to change the description of the goods to be purchased, after a partial goods entry was already posted. Now they complain that what they get is not what they ordered (...) Is it possible to prevent a PO item line from

  • Planning application stoped working

    While showing one of the forms to a coworker on devlopment we got the following error: An error occurred while processing this page. Check the log for details. Please close the current tab and open application again. So we first restareted everything

  • Material document printout (541 & 161)

    Pls tell me the settings to take the printout... when ever i post the document with the movement type 541(it will act as the Material gatepass for subcontracting vendor who comes in to our premises and takes the material). and also Return delivery wh

  • Can't log out of App Server

    Sun Java System Application Server Enterprise Edition 9.1 (build b13) We have several EARs running against Sun App server and using Container Form based authentication. In the applications, we have a Logout link. The Logout link triggers an action in

  • Deleting multiple files in aperture

    How do I delete multiple files? I think it involves the apple key + another key but I cannot find a reference to it. Also, where is the setting for changing "primary only"? Thanks in advance!