Why my micicrophone doens't work for a call
when i make a call, they can't hear my voice. but it works normally when i make the call in speaker mode on
Check here: http://support.apple.com/en-us/ts5183
Similar Messages
-
Why would my internal speakers work for iTunes, but nothing else on the web?
Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen -
My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.
Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!
-
Bluetooth no longer works for incoming calls after recent update
When I updated my Bluetooth to iOS 6, the Bluetooth no longer works for incoming calls. I press button to answer call, it makes a small cracking noise, and then sends the call to my phone. I can use the Bluetooth for outgoing calls and it works just fine. I was hoping when I updated to iOS 6.0.1 that the problem would be fixed. I have uninstalled and reinstalled Bluetooth but that has not helped either. I am frustrated. I have a LG HBM-905 Bluetooth that I loved prior to this problem.
Magically started working today after I synced.
Post relates to: Treo 700w (Verizon) -
After update to OS4.2.1 I can not get the ringer to work for incoming calls
after update to OS4.2.1 I can not get the ringer to work for incoming calls. If I set Vibrate on, that's the only notification I get. Tried everything including blowing away ALL my apps and restoring phone to new. Lost all my apps but the ringer still won't ring
God Bless u! LOL I have an otterbox case on my phone and had no clue that the mute button was there....Thank you so much!! The volume on my movies & everything else worked...even when I would go into "settings" and adjust the volume of the ringtone. I knew it was something simple...Thanks again..
-
Ringer doesn't work for incoming calls
My iPhone 4 ringer won't work for incoming calls. It is not on vibrate only and the ringer works through the earphones when earphones are connected. Any suggestions?
Thank you so very much.
. Simple yet perplexing.. I bought the waterproof case and had them put it on before leaving the store.. GRANTED, I never read the instructions.. Just knew it must have been something in the way I programmed the phone. I especially loved that you put up an illustration with your explanation.
Mahalo,
Donna Jo -
after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games
Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
P/s: And your name is... -
Calls listing, why repetition of the same contact for each call ?
Calls listing, why repetition of the same contact for each call ?
jasonnPOS,
you seam to have had the exat same problem I am having now. Have you solved it?
The link you send in your post :
http://support.apple.com/kb/TS2326
As I think you already noticed doesn't solve the problem it merly duplicates the numbers in each contact. One with +and country code and one without that...
There has to be another solution... -
Why does the sound only work for certain programs?
The sound is only working for certain programs on my iPad. Does anyone know why? Any help is appreciated.
It sounds like you have System Sounds muted. Either the switch on the side, or double tap the home button and swipe to the right, ICON will be on the far left. If the ICON is screen lock related, then it is the switch on the side.
-
Why is developer exchange not working for me?
My developer exchange has not been working recently? In fact, I doubt this will even be posted. Any help?
jdaltonnal,
Not sure what might be happening, also not sure if NI goes into a 'Save or 'Under Contruction' mode at times, but 99% of the time it seems to work for me.
Are you at risk for any 'local' network traffic problems?
Also, I've attached a link that goes directly to the "Developer Exchange Feedback' group - it might be a more direct way to find resolve for connectivity issues.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=8&RFORMNUMBER=2&RHIDETAG=TRUE&UCATEGORY_0=_11&UCATEGORY_S=0
Good luck with it,
Doug -
TS1398 why is none of this working for me?
i tryed everything they told me toand my wifi still wont work for me
Need more information:
- Did the iPod connect to this network before?
- Does the iPod connect to other networks?
- Do other devices connect to this network?
- Does the iPod see the network(s)?
- What happens when you try to connect? Error message? -
Why this code is not working for alv
Dear
Regards,
i have implemented the same program for ALV which i have used earlier in the reports. but now it is showing no output:
*& Report ZTCT1_ALV2 *
REPORT ztct1_alv2 .
CLASS lcl_event_receiver DEFINITION DEFERRED.
* INCLUDING TABLES.
TABLES: vbrk,
vbrp,
kna1,
t001w,
makt.
* DECLARATION OF INTERNAL TABLES.
DATA: BEGIN OF itab OCCURS 0, "Including the fields of VBRK and VBRP
kunag LIKE vbrk-kunag, "Customer Code
name1 LIKE kna1-name1, "Customer Name
vbeln LIKE vbrk-vbeln, "Invoice #
fkdat LIKE vbrk-fkdat, "Invoice Date
werks LIKE vbrp-werks, "Plant
name2 LIKE t001w-name1,"Plant Description
matnr LIKE vbrp-matnr, "Material #
maktx LIKE makt-maktx, "Material Description
meins LIKE vbrp-meins, "Unit of Measure
fklmg LIKE vbrp-fklmg, "Quantity
netwr LIKE vbrp-netwr, "Amount
END OF itab,
BEGIN OF itnm OCCURS 0, "Including the fields of VBRK and KNA1
kunag LIKE vbrk-kunag, "Customer Code
name1 LIKE kna1-name1, "Customer Name
END OF itnm,
BEGIN OF itpt OCCURS 0, "Including the fields of VBRP and T001W
werks LIKE vbrp-werks, "Plant
name1 LIKE t001w-name1,"Plant Description
END OF itpt,
BEGIN OF itmt OCCURS 0, "Including the fields of VBRP and MAKT
matnr LIKE vbrp-matnr, "Material #
maktx LIKE makt-maktx, "Material description
END OF itmt,
BEGIN OF itsm OCCURS 0,
kunag LIKE kna1-kunnr,
name1 LIKE kna1-name1,
fklmg LIKE vbrp-fklmg,
netwr LIKE vbrp-netwr,
END OF itsm,
ok_code LIKE sy-ucomm,
save_ok LIKE sy-ucomm,
g_max TYPE i VALUE 100,
g_repid LIKE sy-repid,
gs_layout TYPE lvc_s_layo,
g_container TYPE scrfname VALUE 'CUST_CONT',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
grid2 TYPE REF TO cl_gui_alv_grid,
gt_sort TYPE lvc_t_sort,
gt_fieldcatalog TYPE lvc_t_fcat,
w_tot_qty LIKE vbrp-fklmg,
w_tot_amt LIKE vbrp-netwr,
* Reference to Dialogbox Container.
dialogbox_container TYPE REF TO cl_gui_dialogbox_container,
* Reference to local class that handles events of GRID1 and
* DIALOGBOX_CONTAINER
event_receiver TYPE REF TO lcl_event_receiver.
* SELECT-OPTIONS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbrp-werks, "Plant
s_kunag FOR vbrk-kunag, "Customer
s_matnr FOR vbrp-matnr, "Material Number
s_fkdat FOR vbrk-fkdat. "Invoice Date
SELECTION-SCREEN END OF BLOCK input .
SELECTION-SCREEN SKIP 1.
* START-OF-SELECTION
START-OF-SELECTION.
SET SCREEN 100.
* CLEARING INTERNAL TABLES.
CLEAR: itab,
itnm,
itmt,
itpt.
* QUERY FOR JOINING TABLES VBRK AND VBRP
SELECT vbrk~kunag
vbrk~vbeln
vbrk~fkdat
vbrp~werks
vbrp~matnr
vbrp~meins
vbrp~fklmg
vbrp~netwr
INTO CORRESPONDING FIELDS OF TABLE itab
FROM vbrk
INNER JOIN vbrp
ON vbrk~vbeln = vbrp~vbeln
WHERE vbrk~kunag IN s_kunag
AND vbrk~fkdat IN s_fkdat
AND vbrp~matnr IN s_matnr
AND vbrp~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRK AND KNA1
SELECT kna1~kunnr AS kunag
kna1~name1
INTO TABLE itnm
FROM kna1
WHERE kna1~kunnr IN s_kunag.
* QUERY FOR JOINING TABLES VBRP AND T001W
SELECT t001w~werks
t001w~name1
INTO TABLE itpt
FROM t001w
WHERE t001w~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRP AND MAKT
SELECT makt~matnr
makt~maktx
INTO TABLE itmt
FROM makt
WHERE makt~matnr IN s_matnr.
* SORTING INTERNAL TABLES.
SORT itab BY kunag.
* LOOP AT itab.
* CLEAR: itmt, itnm, itpt.
* READ TABLE itnm WITH KEY kunag = itab-kunag.
* READ TABLE itmt WITH KEY matnr = itab-matnr.
* READ TABLE itpt WITH KEY werks = itab-werks.
* itab-name1 = itnm-name1.
* itab-maktx = itmt-maktx.
* itab-name2 = itpt-name1.
* MODIFY itab.
* ENDLOOP.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C' 'Customer Code'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C' 'Customer Name'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'VBELN' 'C' 'Invoice #'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKDAT' 'DATS' 'Invoice Date'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'WERKS' 'C' 'Plant'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME2' 'C' 'Plant Description'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MATNR' 'C' 'Material #'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MAKTX' 'C' 'Material Description'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'MEINS' 'C' 'UoM'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN' 'Quantity'.
* PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR' 'Amount'.
LOOP AT itab.
CLEAR itsm.
READ TABLE itnm WITH KEY kunag = itab-kunag.
itsm-kunag = itab-kunag.
itsm-name1 = itnm-name1.
itsm-fklmg = itab-fklmg.
itsm-netwr = itab-netwr.
COLLECT itsm.
ENDLOOP.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C' 'Customer Code'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C' 'Customer Name'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN' 'Quantity'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR' 'Amount'.
PERFORM sort_build USING gt_sort[].
PERFORM layout_init USING gs_layout.
* LOCAL CLASSES: Definition
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column,
handle_close
FOR EVENT close OF cl_gui_dialogbox_container
IMPORTING sender.
PRIVATE SECTION.
DATA: dialogbox_status TYPE c. "'X': does exist, SPACE: does not ex.
ENDCLASS. "lcl_event_receiver DEFINITION
* LOCAL CLASSES: Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
* §3.At doubleclick(1): The event DOUBLE_CLICK provides
* parameters of the clicked row and column.
* Use row parameter to select a line of the
* corresponding internal table.
METHOD handle_double_click.
DATA: ls_sm LIKE LINE OF itsm,
wa_itab LIKE ITAB.
* read selected row from internal table gt_sflight
READ TABLE itsm INDEX e_row-index INTO ls_sm.
* §4.At Doubleclick(2): Select booking data
* READ TABLE ITAB WITH KEY KUNAG = LS_SM-KUNAG. .
READ TABLE ITAB INTO WA_ITAB WITH KEY KUNAG = LS_SM-KUNAG.
* §5.At doubleclick(3): Create dialogbox to show detail list
* (if not already existent)
IF dialogbox_status IS INITIAL.
dialogbox_status = 'X'.
PERFORM create_detail_list.
ELSE.
CALL METHOD dialogbox_container->set_visible
EXPORTING
visible = 'X'.
CALL METHOD grid2->refresh_table_display.
ENDIF.
ENDMETHOD. "handle_double_click
METHOD handle_close.
* §6.Handle the CLOSE-button of the dialogbox
* set dialogbox invisible
* (the dialogbox is destroyed outomatically when the user
* switches to another dynpro).
CALL METHOD sender->set_visible
EXPORTING
visible = space.
* In this example closing the dialogbox leads
* to make it invisible. It is also conceivable to destroy it
* and recreate it if the user doubleclicks a line again.
* Displaying a great amount of data has a greater impact on performance.
ENDMETHOD. "handle_close
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* lcl_event_receiver (Implementation)
*=====================================================================
* FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD g_custom_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'Error in FLush'(500).
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
* MODULE PBO_ALV OUTPUT
MODULE pbo_alv OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'MAIN100'.
g_repid = sy-repid.
IF g_custom_container IS INITIAL.
READ TABLE itsm.
CREATE OBJECT g_custom_container
EXPORTING
container_name = g_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
gs_layout-grid_title = 'Invoice Summary'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_outtab = itsm[]
it_fieldcatalog = gt_fieldcatalog
it_sort = gt_sort.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_double_click FOR grid1.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
ENDMODULE. "PBO_ALV OUTPUT
* MODULE PAI_ALV INPUT
MODULE pai_alv INPUT.
CALL METHOD cl_gui_cfw=>dispatch.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. "PAI_ALV INPUT
*& Form fieldcatalog_init
* text
* -->LT_FIELDCATtext
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextT)
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat
value(field_name) value(field_type) value(field_text).
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = field_name.
ls_fieldcatalog-datatype = field_type.
ls_fieldcatalog-reptext = field_text.
ls_fieldcatalog-coltext = field_text.
ls_fieldcatalog-seltext = field_text.
ls_fieldcatalog-tooltip = field_text.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form sort_build
* text
* -->LT_SORT text
FORM sort_build USING lt_sort TYPE lvc_t_sort.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-fieldname = 'KUNAG'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ls_sort-fieldname = 'NAME1'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ENDFORM. "sort_build
*& Form layout_init
* text
* -->LS_LAYOUT text
FORM layout_init USING ls_layout TYPE lvc_s_layo.
ls_layout-zebra = 'X'.
ls_layout-grid_title = 'Customer Details'.
ls_layout-sel_mode = 'A'.
ls_layout-cwidth_opt = 'X'.
ENDFORM. "layout_init
*& Form create_detail_list
* text
* --> p1 text
* <-- p2 text
FORM create_detail_list.
* create dialogbox container as dynpro-instance
* When the user switches to another screen, it is
* destroyed by lifetime mangagement of CFW
CREATE OBJECT dialogbox_container
EXPORTING
top = 150
left = 150
lifetime = cntl_lifetime_dynpro
caption = 'INVOICE DETAILS'(200)
width = 800
height = 200.
CREATE OBJECT grid2
EXPORTING i_parent = dialogbox_container.
* Register ABAP OO event 'CLOSE'. It is not necessary to register this
* event at the frontend (this is done during creation).
SET HANDLER event_receiver->handle_close FOR dialogbox_container.
* display data
gs_layout-grid_title = 'Invoice Details'(100).
CALL METHOD grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'itab'
is_layout = gs_layout
CHANGING
it_outtab = itab[]
it_fieldcatalog = gt_fieldcatalog
it_sort = gt_sort.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid2.
ENDFORM. " create_detail_list[code][/
code]Hi,
I also copied and pasted the same code check once again by copying this code and create screens by double clicking on 100.
CLASS lcl_event_receiver DEFINITION DEFERRED.
* INCLUDING TABLES.
TABLES: vbrk,
vbrp,
kna1,
t001w,
makt.
* DECLARATION OF INTERNAL TABLES.
DATA: BEGIN OF itab OCCURS 0, "Including the fields of VBRK and VBRP
kunag LIKE vbrk-kunag, "Customer Code
name1 LIKE kna1-name1, "Customer Name
vbeln LIKE vbrk-vbeln, "Invoice #
fkdat LIKE vbrk-fkdat, "Invoice Date
werks LIKE vbrp-werks, "Plant
name2 LIKE t001w-name1,"Plant Description
matnr LIKE vbrp-matnr, "Material #
maktx LIKE makt-maktx, "Material Description
meins LIKE vbrp-meins, "Unit of Measure
fklmg LIKE vbrp-fklmg, "Quantity
netwr LIKE vbrp-netwr, "Amount
END OF itab,
BEGIN OF itnm OCCURS 0, "Including the fields of VBRK and KNA1
kunag LIKE vbrk-kunag, "Customer Code
name1 LIKE kna1-name1, "Customer Name
END OF itnm,
BEGIN OF itpt OCCURS 0, "Including the fields of VBRP and T001W
werks LIKE vbrp-werks, "Plant
name1 LIKE t001w-name1,"Plant Description
END OF itpt,
BEGIN OF itmt OCCURS 0, "Including the fields of VBRP and MAKT
matnr LIKE vbrp-matnr, "Material #
maktx LIKE makt-maktx, "Material description
END OF itmt,
BEGIN OF itsm OCCURS 0,
kunag LIKE kna1-kunnr,
name1 LIKE kna1-name1,
fklmg LIKE vbrp-fklmg,
netwr LIKE vbrp-netwr,
END OF itsm,
ok_code LIKE sy-ucomm,
save_ok LIKE sy-ucomm,
g_max TYPE i VALUE 100,
g_repid LIKE sy-repid,
gs_layout TYPE lvc_s_layo,
g_container TYPE scrfname VALUE 'CUST_CONT',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container,
grid2 TYPE REF TO cl_gui_alv_grid,
gt_sort TYPE lvc_t_sort,
gt_fieldcatalog TYPE lvc_t_fcat,
w_tot_qty LIKE vbrp-fklmg,
w_tot_amt LIKE vbrp-netwr,
* Reference to Dialogbox Container.
dialogbox_container TYPE REF TO cl_gui_dialogbox_container,
* Reference to local class that handles events of GRID1 and
* DIALOGBOX_CONTAINER
event_receiver TYPE REF TO lcl_event_receiver.
* SELECT-OPTIONS
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK input WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbrp-werks, "Plant
s_kunag FOR vbrk-kunag, "Customer
s_matnr FOR vbrp-matnr, "Material Number
s_fkdat FOR vbrk-fkdat. "Invoice Date
SELECTION-SCREEN END OF BLOCK input .
SELECTION-SCREEN SKIP 1.
* START-OF-SELECTION
START-OF-SELECTION.
SET SCREEN 100.
* CLEARING INTERNAL TABLES.
CLEAR: itab,
itnm,
itmt,
itpt.
* QUERY FOR JOINING TABLES VBRK AND VBRP
SELECT vbrk~kunag
vbrk~vbeln
vbrk~fkdat
vbrp~werks
vbrp~matnr
vbrp~meins
vbrp~fklmg
vbrp~netwr
INTO CORRESPONDING FIELDS OF TABLE itab
FROM vbrk
INNER JOIN vbrp
ON vbrk~vbeln = vbrp~vbeln
WHERE vbrk~kunag IN s_kunag
AND vbrk~fkdat IN s_fkdat
AND vbrp~matnr IN s_matnr
AND vbrp~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRK AND KNA1
SELECT kna1~kunnr AS kunag
kna1~name1
INTO TABLE itnm
FROM kna1
WHERE kna1~kunnr IN s_kunag.
* QUERY FOR JOINING TABLES VBRP AND T001W
SELECT t001w~werks
t001w~name1
INTO TABLE itpt
FROM t001w
WHERE t001w~werks IN s_werks.
* QUERY FOR JOINING TABLES VBRP AND MAKT
SELECT makt~matnr
makt~maktx
INTO TABLE itmt
FROM makt
WHERE makt~matnr IN s_matnr.
* SORTING INTERNAL TABLES.
SORT itab BY kunag.
LOOP AT itab.
CLEAR itsm.
READ TABLE itnm WITH KEY kunag = itab-kunag.
itsm-kunag = itab-kunag.
itsm-name1 = itnm-name1.
itsm-fklmg = itab-fklmg.
itsm-netwr = itab-netwr.
COLLECT itsm.
ENDLOOP.
* END-OF-SELECTION.
* If not itsm[] is initial.
* CALL SCREEN 100.
* endif.
* LOCAL CLASSES: Definition
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_double_click
FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING e_row e_column,
handle_close
FOR EVENT close OF cl_gui_dialogbox_container
IMPORTING sender.
PRIVATE SECTION.
DATA: dialogbox_status TYPE c. "'X': does exist, SPACE: does not ex
ENDCLASS. "lcl_event_receiver DEFINITION
* LOCAL CLASSES: Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
* §3.At doubleclick(1): The event DOUBLE_CLICK provides
* parameters of the clicked row and column.
* Use row parameter to select a line of the
* corresponding internal table.
METHOD handle_double_click.
DATA: ls_sm LIKE LINE OF itsm,
wa_itab LIKE ITAB.
* read selected row from internal table gt_sflight
READ TABLE itsm INDEX e_row-index INTO ls_sm.
* §4.At Doubleclick(2): Select booking data
* READ TABLE ITAB WITH KEY KUNAG = LS_SM-KUNAG. .
READ TABLE ITAB INTO WA_ITAB WITH KEY KUNAG = LS_SM-KUNAG.
* §5.At doubleclick(3): Create dialogbox to show detail list
* (if not already existent)
IF dialogbox_status IS INITIAL.
dialogbox_status = 'X'.
PERFORM create_detail_list.
ELSE.
CALL METHOD dialogbox_container->set_visible
EXPORTING
visible = 'X'.
CALL METHOD grid2->refresh_table_display.
ENDIF.
ENDMETHOD. "handle_double_click
METHOD handle_close.
* §6.Handle the CLOSE-button of the dialogbox
* set dialogbox invisible
* (the dialogbox is destroyed outomatically when the user
* switches to another dynpro).
CALL METHOD sender->set_visible
EXPORTING
visible = space.
* In this example closing the dialogbox leads
* to make it invisible. It is also conceivable to destroy it
* and recreate it if the user doubleclicks a line again.
* Displaying a great amount of data has a greater impact on
*performance.
ENDMETHOD. "handle_close
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* lcl_event_receiver (Implementation)
*=====================================================================
* FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD g_custom_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'Error in FLush'(500).
ENDIF.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
* text
module STATUS_0100 output.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'MAIN100'.
g_repid = sy-repid.
IF g_custom_container IS INITIAL.
READ TABLE itsm.
CREATE OBJECT g_custom_container
EXPORTING
container_name = g_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc NE 0.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = g_repid
txt2 = sy-subrc
txt1 = 'The control could not be created'(510).
ENDIF.
CREATE OBJECT grid1
EXPORTING
i_parent = g_custom_container.
gs_layout-grid_title = 'Invoice Summary'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'KUNAG' 'C'
'Customer Code'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NAME1' 'C'
'Customer Name'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'FKLMG' 'QUAN'
'Quantity'.
PERFORM fieldcatalog_init USING gt_fieldcatalog[] 'NETWR' 'CURR'
'Amount'.
PERFORM sort_build USING gt_sort[].
PERFORM layout_init USING gs_layout.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_layout = gs_layout
CHANGING
it_outtab = itsm[]
it_fieldcatalog = gt_fieldcatalog
it_sort = gt_sort.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_double_click FOR grid1.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid1.
endmodule. " STATUS_0100 OUTPUT
* MODULE PAI_ALV INPUT
MODULE USER_COMMAND_0100.
CALL METHOD cl_gui_cfw=>dispatch.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. "PAI_ALV INPUT
*& Form fieldcatalog_init
* text
* -->LT_FIELDCATtext
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextE)
* -->VALUE(FIELDtextT)
FORM fieldcatalog_init USING lt_fieldcatalog TYPE lvc_t_fcat
value(field_name) value(field_type)
value(field_text).
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
CLEAR ls_fieldcatalog.
ls_fieldcatalog-fieldname = field_name.
ls_fieldcatalog-datatype = field_type.
ls_fieldcatalog-reptext = field_text.
ls_fieldcatalog-coltext = field_text.
ls_fieldcatalog-seltext = field_text.
ls_fieldcatalog-tooltip = field_text.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ENDFORM. "fieldcatalog_init
*& Form sort_build
* text
* -->LT_SORT text
FORM sort_build USING lt_sort TYPE lvc_t_sort.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-fieldname = 'KUNAG'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ls_sort-fieldname = 'NAME1'. "Fieldname on which to sort
ls_sort-up = 'X'. "Sort Ascending
APPEND ls_sort TO lt_sort.
ENDFORM. "sort_build
*& Form layout_init
* text
* -->LS_LAYOUT text
FORM layout_init USING ls_layout TYPE lvc_s_layo.
ls_layout-zebra = 'X'.
ls_layout-grid_title = 'Customer Details'.
ls_layout-sel_mode = 'A'.
ls_layout-cwidth_opt = 'X'.
ENDFORM. "layout_init
*& Form create_detail_list
* text
* --> p1 text
* <-- p2 text
FORM create_detail_list.
* create dialogbox container as dynpro-instance
* When the user switches to another screen, it is
* destroyed by lifetime mangagement of CFW
CREATE OBJECT dialogbox_container
EXPORTING
top = 150
left = 150
lifetime = cntl_lifetime_dynpro
caption = 'INVOICE DETAILS'(200)
width = 800
height = 200.
CREATE OBJECT grid2
EXPORTING i_parent = dialogbox_container.
* Register ABAP OO event 'CLOSE'. It is not necessary to register this
* event at the frontend (this is done during creation).
SET HANDLER event_receiver->handle_close FOR dialogbox_container.
* display data
gs_layout-grid_title = 'Invoice Details'(100).
CALL METHOD grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'itab'
is_layout = gs_layout
CHANGING
it_outtab = itab[]
it_fieldcatalog = gt_fieldcatalog
it_sort = gt_sort.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = grid2.
ENDFORM. " create_detail_list
Nothing wrong in the code i am able to see the output with five records and the pop-up screen on double clicking a value.
Kindly close the thread or revert back -
Ringer Sound doesn't work for phone calls.
I can't get my iPhone 4S sound to work for receiving phone calls. Sound selected along with vibrate for phone calls. Miss calls everytime. Volume turned up and turned on.
Two things to check
Is the Mute switch ON ?
Do you have Do Not Disturb set ON ? -
Video not working for regular calls after using sh...
i can see the other person i am calling but they cannot see me. Everything was working fine until i had to do a share screen for a conference call. After that the button for video is shaded gray and the other person cannot see me for regular calls. any help on what to do would be greatly appreciated! Thank you!
Try to reset Skype Settings
http://community.skype.com/t5/Windows/Skype-auto-logs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others. -
DTMF doesn't work for outbound call
We currently using UC520 and having strange problem. When we call through SIP for outbound call DTMF tone is not transmitting. and if I press multiple numbers with longer duration, It makes continuous tone on the other hand.
My current dialpeer uses DTMF relay RTP- NTE. I will attach sh run and debug ccsip message file. please help me this is being quite critical.Seems like your SIP Trunk Service provider is not getting the RFC2833 packets or not interpreting them correctly.
I see on the log that you pressed 1, 2 & 3 and the UC520 sends all these digits out (each digit will have 7 packets - this post explains how to read this debug - https://www.myciscocommunity.com/message/14045#14045). So I know its not the UC520 - below is a snip for digit 1
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B86 timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:04 00 00 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B87 timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:04 00 00 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B88 timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:04 00 00 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B89 timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:04 01 90 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8A timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:84 03 20 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8B timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:84 03 20 >>
Sep 10 16:26:26.114: s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8C timestamp 0xBCB7190A
Sep 10 16:26:26.114: Pt:101 Evt:1 Pkt:84 03 20 >>
In terms of next steps:
- Is there any router or NAT or firewall device between the UC520 WAN interface and the SIP Trunk service provider? If so maybe good to check if you can bypass this device or if this device blocks RFC2833 packets
- Ask the SIP Trunk SP what they see on their end for the RFC2833 packets - you can send them a wireshark capture off the UC500 WAN port if that is more convincing than a debug log. Who is the SP by the way?
Maybe you are looking for
-
Hi i have problem one of my bank cheque clearing account i was not check open item management now i have to change that account to open item management but it is not accepting i had heard that ther is programe for effect open item management to past
-
How to prepare for the EBS R12 Supply Chain OCE Certification
Hello everybody, I post this thread because I'm going to take the exams to get the certification as Oracle EBS R12 Supply Chain Certified Expert Consultant and I'd like to understand how to best prepare myself. Is there anyone who has already got thi
-
I am trying to set up a WRK54G ver 1.1. I have succcessfully gotten it running and can access the internet both via a wired connection to my home computor and a wireless connection on my laptop. The problem is that when I go to MiLB.com and try to l
-
Hi All, can i make sure if i get ora-121 or ora-01034 errors then the database is down. As my database is getting down on every 3rd sunday of a month. Thanks & Regards Megh
-
ITunes won't load after windows update
Just did the latest automatic backup in Windows 7, and noe iTunes won't load. It keeps "checking" my library then I get a Windows message that iTunes is shutting down. Anyone else getting this?