Why my music application in iphone 4 with IOS 5 not working properly??

I have Updated mine to IOS 5 and my songs are not playing pproperly from the new Music App. They are syncing properly but not playing some songs,skipping some songs and showing one song but playing another.. Its annoying..Please help me.. Thanks
Harish,..

Hi all.
Possible fix:
Had this annoying issue, or similar. Songs on my iphone 4 would skip untilit found a song it could play, but often left up on the screen a different song to the one playing. It appeared songs hadnt been transferred or were missing causingthe phone to skip the songs.
I heard that if you get a 'weird' beep noise this is the 'shake to shuffle' feature which can be turned off via Settings>Music.
If you have a similar issue to mine, I read converting to AAC (right click song in Itunes and choose 'convert to AAC) could work, and did for me, but is time consuming and duplicates the song.
What worked for me? Turning off 'convert higher bit rate songs to 128 kbps AAC' on the Devices>Your Iphone main menu (device summary page). This reloads all songs to the iphone and appears to fix the issue. I have checked a few songs I knew had issues and they now work, and I can get through 10+ shuffle songs (thats as many as I checked) without a skip.
Good luck. Let me know if it works.

Similar Messages

My music app on my iphone 5 is not working properly since I downloaded ios7.

The music app on my iphone 5 is not working properly since I downloaded ios7.
Sometimes I start to use the music app and then part way though a track it stops. I try to re-start it with no joy. I'm also finding the touch screen is less responsive. Can any help me fix the issue or will I need to take it into the store?

Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

Hi, My iPhone 4s does not work properly with the sound.

Hi, My iPhone 4s does not work properly with the sound. It just ring. Any other app it doesn't make sound unless I have my headset or bluetooth. And it make me choose between "DOCK CONECTOR" or my "APPLE TV". Why? Or any sugestion plz

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone battery is not working properly as compare to earlier after IOS 7 Update. should i change my battery and if yes then how much it costs in india?

My iphone battery is not working properly as compare to earlier after IOS 7 update.
Should i change my battery if yes then how much it will cost in india??

Turning off things in settings, restoring as new phone, etc. everything I've seen on forums and CNet etc sites

My iphone 5 does not work properly with Ford Sync,

Hi, My iphone 5 does not work properly with Ford Sync, everytime I pair the phone, Ford sync navigation system freezes and does not work !
Can someone help.

Hi M3MB3R,
Thanks for visiting Apple Support Communities.
You may find the troubleshooting tips in this article helpful:
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Cheers,
Jeremy

My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

Morning JordenR,
Thanks for using Apple Support Communities.
You can resolve many restore issues using the troubleshooting steps documented here.
For more information on this, take a look at this article:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/ts1275
Best of luck,
Mario

HT4623 i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

i have dought if my iphone 4 will not work properly, as i heard it become slow after update ios7 , can someone help me out what to do.. ?

Hello there, morganbailey02.
The following Knowledge Base article provides some great steps for troubleshooting your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali

Hi I need ur help actually my iPhone 5 is not working properly I been to apple store they said u have to booked online for repair but I couldn't find where to register plz help out thx ali

Dollersheikh wrote:
... I been to apple store ...
Go to that Apple Retail Stores website and click on Make a Reservation...
Here's an example...
http://www.apple.com/retail/crossgates/
Store List here > http://www.apple.com/retail/storelist/

How to fix apple iphone touch id not working properly?

I have a iphone 5s,, it's touch id is not working properly.. even after multiple attempts,, it is not working properly... what to do..??

Hi palash_1993,
Welcome to Apple Support Communities.
The article linked below provides a lot of great information and troubleshooting suggestions that’ll resolve issues like the one you described, where you're running into Touch ID issues with your iPhone 5s.
Use Touch ID on iPhone and iPad - Apple Support
Get help with Touch ID
Make sure that you're using the latest version of iOS.
Make sure that your fingers and the Home button are clean and dry.*
Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
Try enrolling a different finger.
If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
* Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Cheers,
-Jason

Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

A couple of other things you can try -
With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
- Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
- In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
- Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
- Delete and re pair your iPhone from your Toyota system
Hope something here helps. Thanks

HT5569 hi my question is about my iphone 5 is not working properly i have installed iso 7 latest version but dont know what is wrong with it?

my starts siri by it self and when i desable siri so voice control starts talking even i didn't touch my fone its operating by its self in the middle of talking on fone or not using it. sometimes the home key is not working at all. it stuck and i have to rebot or restart it again. i don't know its technical problem or software problem. i bought this iphone 5 on applestore.com in january 2013. this problem was started in may 2013 but was not so often and from september upto now its irrateting me so badly. sometimes it doesn't work at all and sometimes it didnt recognize my apple ID to sign in app store or itunes.
how fix this problem any one can tell me plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
thank you

Hi Karneet,
Thanks for visiting Apple Support Communities.
See this articles for some troubleshooting help, if your iPhone isn't detected by iTunes or Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
Best,
Jeremy

3.1.3 firmware, iPhone 3G headset not working properly anymore

Situation:
iPhone 3G 16GB, Firmware 3.1.3.
Updated the other day, and now my apple headphones have stopped working properly. Basically, the pause button on the mic is now intermittent and the same button won't pause iPod functions.
If I restart, it sometimes works OK for a little while then will stop working again. I have also noticed issues with some of the calls that I make being "silent" i.e. they connect, but when I speak the other end can't hear the voice.
If I make the call to my own phone, it usually seems to work OK, which is typical!
Anyone else having the same problem?
The funny thing is that it has to be something that Apple should be responsible for...I use a MacBook, Snowleopard OS, iPhone, and all original cables. Everything is patched to the latest versions and all the hardware is in A1 condition.

I think there may be something wrong with my headphone jack/Bose headset combo. It works fine on my wife's 3GS. The Apple one briefly did not work on mine, then started working. I did the painful restore as new user and it still does not work. Time to go to Bose/Apple.

I cannot see why DVD @CCESS and DVD-ROM content are not working properly

Hi,
I am very new to DSP, and I know I am missing a piece of the jigsaw, but I do not know what it is. I used a tutorial from creative cow to try and make the @CCEESS function work, but no dice… for now at least. When I did a build/format (to the HDD) everything went fine. I mounted the image, and I could see the DVD @CCESS folder and the DVD–ROM content on the DVD image. When I went to play the image, the button did not work. The content I am trying to use with @CCESS is a PDF file.
The tutorial I followed was this: http://library.creativecow.net/articles/alexzander_alex/dvdaccess.php
By the way, I am using is 4.2.2
Help or just counsel is appreciated.

As Eric said - DVD@ccess is really not that useful. It was a way to get documents like PDFs to automatically launch in the application (like Acrobat) when watching a DVD on a computer. Since they can't launch on a set top player the technology was already limited. Then the whole issue of getting it to work on a PC arose - it simply wasn't reliable. I managed to produce one disc that was replicated with @ccess links, but I knew the parameters for it's use in advance and managed to get it to work. It doesn't work on modern machines.
For a while there was a Sonic app which was much better at getting this sort of thing to work, but you had to work on a OC to set it up. Sonic pulled the app shortly after I bought it (sigh) and never replaced it. The fact is, automating document launches and web links is actually pretty tricky on a DVD, the results were variable and it never really enhanced your discs like you wanted to think it would!
If all you want to do is include a PDF file on the disc, and alert viewers to it being there, you only need to use the ROM content functions not @ccess, and you can use a menu screen to give instructions to people to let them know how to find it.

Binding gateway service with List not working properly with expand

Hi all,
We have an orderlist with details, we use the splitapp for it, it's working nicely with a gatewayservice. We have now added with expand 2 orderpartners. I see the 2 partners, only is it completly the same data. I checked the oData structure and I see indeed that the 2 partners are the same. This is weird, because when I execute the service, via my browser, I see 2 different partners.
If I execute the service directly via the read function, I see in the oData that I also have 2 different partners. So my conclusion is that the direct read of the service is working and executing the service via the sap.m.List is not working with the expand.
Now my question is, does somebody know what's going wrong here, or is it a bug in the sap.m.List? Below you find code snippets how I call the service.
This call is working:
oModel.read("/OrderListSet", null, ["$orderby=BegTstmp asc&$filter=Userid eq 'user' and DateFrom eq datetime'2014-04-20T00:00:00' and DateTo eq datetime'2014-04-27T00:00:00'&$expand=OrderPartners"], null, function(oData, oResponse){
}, null );
The binding via the sap.m.list is:
var oList = new sap.m.List("orderList", {
mode: "{device>/listMode}",
            items: {
        path: "/OrderListSet",
           parameters: {expand: "OrderPartners"},
        template : new sap.m.StandardListItem({
        title: {
               parts: [
                       {path: "BegTstmp", type: new sap.ui.model.type.DateTime({pattern: "H:mm"})},
                       {path: "DataCol2"}
               formatter : function(strDate, strDescription) { return strDate + " - " + strDescription; }
        description: {
        parts: [
                      "DataCol3",
                      "DataCol4",
                      "DataCol5",
                      "DataCol6"
        type: sap.m.ListType.Navigation,
        icon: "{icon}",
        customData: [
        new sap.ui.core.CustomData({
        key: "orderId",
        value: "{Orderid}"
        new sap.ui.core.CustomData({
        key: "type",
        value: "{Type}"
        // Sort the list on date and group the list on day
               sorter: new sap.ui.model.Sorter("BegTstmp", false, oGrouper),
               // Filter the list, this directly refrenced to the gatewayservice
        filters: [
                 util.Filter.getUserId(),
                 util.Filter.getCurrentWeekFromFilter(),
                 util.Filter.getCurrentWeekToFilter(),

Fine. If you're trying to bind any attributes of OrderPartners, bind it as OrderPartners/attribute-name. Say if "BegTstmp" an attribute of OrderPartners bind it as OrderPartners/BegTstmp.
Regards
Sakthivel

Application deployment and reporting does not work properly

Hello
I have a network and i management that with sccm 2012 cu2
Just have a problem with sccm
Sccm dosenot show corect data for collection or reporting such as all windows sevens
However self service portal doesnot work properly and for install program wants administrator privilage for users
Sql is 2008r2 cu6

What is displayed and where? What was expected?
Torsten Meringer | http://www.mssccmfaq.de

Why my music application in iphone 4 with IOS 5 not working properly??

Similar Messages

Maybe you are looking for