Why my Nikon D3200 is not recognized after updating to Yosemite?

Hello.
I'm using MacOSX Yosemite (10.10) and when I plug my Nikon D3200 nothing happens. It worked fine with MacOSX Mavericks (10.9).
I read a possible solution that involved deleting raw files on the system library but it did nothing.
Any suggestions about how to solve this issue? I really need my camera working with my Mac and that's not happening.
Thank you.
Best regards,
Telmo

This thread may give you some help:
RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)

Similar Messages

  • Netflix Streaming on MacMini does not work after update to Yosemite

    Netflix videos will no longer stream :
    I am using a MacMini (late 2012) with an HP w2207h display.  Intel processor 2.5 GHz Core !5  Intel  HD Graphics 4000 1024 MG  After updating to Yosemite, 10.10.1, I cannot stream videos from the Netflix site.
    All of the monitor specs. would indicate that streaming videos in HDCP would be possible.  Everything streamed very well until approximately 4 days ago.
    I have changed the display resolution to 1080p.  I have disconnected the monitor and reconnected it several times.  I have updated iTunes as well as Yosemite.

    Have you went to NetFlix's support site?

  • Camera not recognized after update to mavericks 10.9.1

    My MBP camera is not recognized by any applications since I updated the operating system to Mavericks. I updated to the latest version of Mavericks and still no luck. Does anyone know of a fix for this problem? Thank you.

    Hey was facing the same problem with my girlfriend's macbook air, but i found a way to solve it:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    its already there in the support page http://support.apple.com/kb/HT3964
    Hope it helps

  • IPhone 4s not recognized after update to ios 7.1

    My iPhone will no longer sync nor show up in windows explorer (running Windows 7) after installing update 7.1. It may be relevant to note that I had replaced the dock connector prior to updating to 7.1, but the device was still syncing and showing up in the explorer. After updating, it won't show up plugged in and not on WiFi sync either.
    I have followed the advice here: http://support.apple.com/kb/ts1538
    I have had no success. I have tried multiple cables which I don't believe are the issues since they charge just fine.
    Has anyone discovered a solution besides the aforementioned for this?
    UPDATE 1: It should also be important to note that the iphone does not show up in device manager AT ALL. Not under Universal Serial Bus controllers nor Imaging devices. There are no "Other Devices" or "Portable Devices" categories listed on my Device Manager.

    Can anyone please help? This community is not like it used to be...
    The worst part is, I cannot even do a restore since the device does not show in windows at all. I have even tried another computer and it is not showing up. At the very least, can someone tell me if they believe this is iPhone hardware related or iPhone software related?
    As I said, the iPhone was syncing just fine after the dock connector replacement. It was only after updating from ios 7.0 to 7.1 that the problem arose.
    Please any little bit of feedback is helpful.

  • ITunes 12.0.1 not working after updating to Yosemite OS X

    After updating my Mac to Yosemite OS X, iTunes app simply doesn't open.
    I've tried deleting it (it's not possible) and when reinstalling it, nothing happens.
    Any suggestions?

    My iTunes launches, but I can't access any menu items.  Prior tips have shown a GPU error may be to blame?
    CPU spikes and stays high even though nothing ever loads.
    /Applications/iTunes.app/Contents/MacOS/iTunes ; exit;
    Returning 0x0. Advertising wake service for libraryIdentifier "*************77A".AVDCreateGPUAccelerator: Error loading GPU renderer

  • Website shortcuts not recognized after updating to 33.0.2

    This morning Firefox downloaded an automatic update to 33.0.2. At my place of employment, I have several 'shortcut' urls to internal websites which are not a www. format, they look like this:
    http://sitenickname
    I should just be able to type the word sitenickname into the bar and be taken there. However, after the update it takes me to my homepage and asks, "Did you mean to go to sitenickname?" and I have to click yes or no. Every time.
    Is there a way I can make this a recognized keyword so I don't have to keep answering this question? And for my own future knowledge, what are these types of keywords properly called?
    I really appreciate any help.

    hello jscuffins, if you click yes on "Did you mean to go to sitenickname?" firefox should remember that choice the next time you enter this particular local domain and don't bring up the search page again: http://msujaws.wordpress.com/2014/08/01/faster-and-snappier-searches-now-in-firefox-aurora/
    in case this does not work as intended, maybe have a look at [[How to fix preferences that won't save]]

  • Ipod not recognized after updating software

    1. I returned my Ipod to Apple for battery service.
    2. After getting it back, I updated the software on my computer.
    3. When I plug in the Ipod, I get a message that the hardware did not install properly.
    4. The Ipod does not have an error message on itself.
    5. Itunes does not recognize the Ipod.
    6. I've reset the thing about 20 times.
    7. I'm about to throw the piece of crap away.

    Jim,
    Press "select"+"play" keys and you will see the disk mode sign. plug it with your PC, open the iPod updater and click Restore. Try to use the USB behind the computer instead of the front.

  • HT4972 why is my iphone 3g not working after updating

    while updating my iphone 3g to latest ios version it has now stopped working . The setup comes but when i activate it after selecting language and country it does not respond to either itumes on my laptop or wi-fi.

    The issues you describe are typically the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided via these forums.

  • Satellite A500 - TV tuner not recognized after updates installation

    I recently ran some updates (Windows 7) for Satellite A500 (PSARA9A). It has an inbuilt tuner & it was working fine until the updates. Now when I go to watch TV or Record it comes up with "No tuner available to satisfy current request".
    I tried to install new driver, but I can't tell if it's doing anything. Device manager tells me the latest drivers are installed, yet it shows yellow exclamation mark.
    Can anyone suggest anything here??

    Thanks for the replies, I appreciate it.
    Still can't get the tuner to work.
    I tried uninstalling it, it then tried to re-install, but failed.
    Yet It tells me latest driver is installed. Still have yellow exclamation mark.
    So decide to do a system restore.
    Tuner still has the same issues & now Windows Media Center won't work either. it's quite frustrating.
    Did a search for media center, which told me to turn it off & then on (in windows features).
    Still not working. So yep, now have 2 issues.
    Any further suggestions on either issue.

  • Password not recognized after updating iTunes

    I just updated iTunes and now it doesn't recognize my password. Do I have to start another account?

    If you start another account--you may have trouble playing things you already bought. Can you contact the store and have them reset your password? You can use the email links inside the store when you click on support.
    On Edit: Does anything in this article help:
    http://www.apple.com/support/itunes/store/password/

  • Mail thread in Apple mail not working after updating to Yosemite

    I just upgraded to Yosemite a couple of days ago and I noticed that my mail threads are not working properly. Instead of having threads categorized by the subject line, I have thousands of emails in just ONE thread that are completely irrelevant to each other. I have deleted my email accounts completely and reinstalled them from scratch and they still have the same problem after my emails are dowloaded from my IMAP server. I have also tried to rebuild the email account and the same problem happens. I get around 700 - 800 emails a day so the thread function is extremely crucial for me to be able to track all of my emails, but there is no way to do it now when everything is bunched together.
    Anyone else running into the same issue? I am using a third party host (Bluehost) as my hosting service, but this problem never came up on the previous operating systems or my IPHONE. Those still work just fine.
    Thanks
    S

    The longest thread about this seems to be this one: LINK
    Best course of action now is to describe the problem to apple in the feedback form: LINK

  • Contrast button not working after updating to Yosemite.

    I have Macbook Pro Mid 2012 version. I just updated to OS X Yosemite and I noticed that contrast button on keyboard is not doing anything. It shows an error like in this picture

          This link may help you. Ipad unresponsive or not sycning!

  • 2nd external display no longer being recognized after updating to Yosemite

    using a 2 yr old Macbook Pro 15 with 2 external monitors. No prior issues when I was using Mavericks but since switching to Yosemite yesterday, I've not been able to get the system to recognize the 2nd monitor. I've restarted the system several times and still nothing. I've also checked all connections and made sure everything was secure. What can I do to resolve this issue???

    Anyone have any help or suggestions? Thanks

  • IPhoto not "installing" after updating to Yosemite

    I have just updated to Yosemite.
    My old iPhoto won't work.
    I try to download the latest version of iPhoto, which says is downloading, but when the download ends it never installs.
    Correction - the "Instal" doesn't complete.
    The site just says "Installing" but it never completes.

    Here's the deal....First I backed up my iPhoto Library; downloaded the iPhoto Updater 4 times; each try it popped up on my desktop within seconds and
    did its thing; I continued to click on iPhoto in the dock and application folder and was lost in that loop.
    FINALLY I searched "This Mac" for iPhoto and hidden amongst the gems was the app "iPhoto LIbrary Upgrader."
    I'll be ****...
    Click, open, update, upgrade and up my #%@
    It worked like Apple said it would.
    Good luck and good night.

  • Adobe Indesign not working after update to Yosemite?

    Can anyone help with this issue?

    Google can be your friend:
    How to Clean Install OS X Yosemite - OS X Daily
    How to Do a Clean Install of OS X Yosemite - Mashable

Maybe you are looking for