Why my numbers printing result always a blank page? Need help :(

Friends, I really need fast response.
Every time I tried to print my Numbers file (contained 3 tables in 1 sheet), the printing result always blank page.
And there's this notification:
Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.
I'm using Canon iP100.
Everything's normal when I print my emails or pages file.
Thanks much before

Maybe the brute force treatment is not required.
One may try:
export as XL file
import the XL file
it may clean the annoying oddity.
Other scheme:
export as CSV
import the CSV file.
It's more severe that the 1st one but it's less than dropping the file
Yvan KOENIG (VALLAURIS, France) mardi 17 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Similar Messages

  • Why my Numbers printing result always a blank page?

    Friends, I really need fast response.
    Every time I tried to print my Numbers file (contained 3 tables in 1 sheet), the printing result always blank page.
    And there's this notification:
    Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.
    I'm using Canon iP100.
    Everything's normal when I print my emails or pages file.
    Thanks much before

    for a "fast response", I would re post this in the Numbers forum, where all the users who know that program well ask and answer questions.  Good luck.

  • Suddenly, when I print a Selection from an email, it prints out about 10 blank pages and somewhere in there, the selection I wanted.

    I'm using Firefox 12 on Windows XP. Things worked fine until just this evening. Now when I choose Print/Selection in my email, it spits out multiple (like, maybe 10 or more) blank pages with just a header/footer on them. I've followed the instructions for reseting the Firefox printer setting AND Reseting all Firefox printer settings and it still does it. Everything prints fine in Internet Explorer. This printing issue is getting REALLY tedious. I don't want a complicated workaround, I just want to print a selection. NOW why isn't it working?

    Thanks, Cor-el, but that question addressed a problem I had with FF11 (that was only fixed when FF12 came out). FF12 worked fine for printing selections from emails perfectly up until yesterday afternoon. Reboot didn't help, even after reboot when I preview what I want to print (thank goodness for that option, or I'd be going through a lot of paper) it's still showing the page of text I actually want to print, then 6-8 blank pages afterward. This is not happening with every email, I have noticed ths morning. It now happens with email sent from (or to, as a reply) a yahoo account in Sweden and email sent from (or in reply to) a gmail account in Canada. These previously printed fine. Other emails will print maybe one extra page. There seems to be no rhyme or reason why it would suddenly start doing this. Should I look at the source code? What would I be looking for?

  • When I try to print labels I get no preview of the labels and then it just prints blank pages. Help please

    When I try to print labels I get no preview of the labels and then it just prints blank pages. Help please

    I post the same instructions almost every day...
    Change the Adobe Reader Preferences
    Documents: set 'View documents in PDF/A mode' to Never
    Security (Enhanced): disable Protected Mode at Startup

  • TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

  • Printer wont stop feeding blank pages

    Installed Tiger on G4 Powerbook. HP Photosmart will not print, will just feed blank pages through the printer. Reloaded printer drivers with no success. Any ideas?? Thanks

    I was using 10.4.11 and some things were working ok, just wouldn't do faxes correctly. Amongst other quirks I did an archive reinstall and went back to using 10.4.10. My epson printer is doing this very same thing as yours. I have tried uninstalling all and reinstalling all, nothing has changed. Good luck with you

  • Printing Blank Pages! Help

    I downloaded a PDF, hit print and am getting blank pages!  

    Hi,
    Sorry to hear you are having trouble.
    you might be best to contact your local HP support team in the country that you are in to guide you to a solution. There may be solution that this forum cannot supply.
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • In installation process of Acrobat Professional 7 , its showing that Adobe Pdf printer is not Installed...need help to install the software completely

    In installation process of Acrobat Professional 7 , its showing that Adobe Pdf printer is not Installed...need help to install the software completely

    If it is Win 7 or later, the Adobe PDF printer for AA 7 will not install and AcroTray will not function. You will have to install a PS driver from Adobe or maybe an HP color PS printer driver. Then edit the driver properties and change the name to Adobe PDF and the port to FILE. You will always have to do an extra step in creating PDFs by opening the file that is created in Distiller to get the PDF.
    If you are talking about Win 8, you may not be successful at all. If you got Acrobat and Distiller to install, then there is a chance.

  • Why does my hp d7260 printer spit out a blank page each time one is printed?

    Often the printer will print out the desired page and than a eject the next page (blank with no intention of printing on it).  It will have a blank page between each multipage printing.  It always does this on printing from my wife's computer and sometimes from mine.  The printer is connected to our home network.  I am using xp and my wife is using vista.  I haven't kpet track of every incident from my computer but usually printing something from my browser. I run the paper through again so it is not a waste but just a pain.
    Thanks   George

    This sounds like an issue that could result from having A4 sized paper but having the printer settings set for A size.  Please check the paper settings.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HELP! hp laserjet prints code and infinite blank pages!

    hey guys,
    ive got an early 2009 imac with 2.66ghz intel core 2 duo and 8gb ram,
    im running latest mavericks and trying to use a hp laserjet 1320tn printer.
    PROBLEM:
    when i press print i get one page with a line of code and then infinite blank pages untill i hold cancel.
    the line of code is :
    %! PS-Adobe-3.0
                                %APL_DSC_Encoding:   UTF8
                                                                                   %APLProducer: (Version 10.9.2  (Build 13c6
    here are some things that i have tried:
    * checked toner - 46% full
    * using the printer set up on a network (unshared)
    * using the printer via usb
    * reseting printing system ( many times )
    * using latest drivers
    * using older drivers
    * using alternate drivers from HP
    * using a generic post script printer driver
    * repair / verify disk permisions ( many times )
    * (last resort) Clean install of osx mavericks with fresh hp updates
    im fresh out of ideas guys
    the printer has been checked with a windows laptop and it printed perfectly and immediately so its an issue with my mac
    i dont really want to buy another printer as a need a small network duplex monochrome laserjet, and this is perfect ( except i cant get it to work !)
    also i checked with the manufacturer and apple and this printer is supposedly supported.
    any help would be awesome!

    OK here goes... (please take a deep breath)
    I'm going to include TONS of details, hoping that something here might help you get to the answer.
    If it's too much for your brain at whatever moment you get time to read all this, I do apologize.
    Maybe come back later when they're sleeping and you're wide awake, if that is ever possible. I was a stay-at-home Dad for one precocious child for a few years, so I have a tiny idea what you're talking about, though our married friends with multiple (usually bickering) children always assured us that having just one child is nothing at all like having children. So bless you! My heart goes out to you!
    Anyway, in Windows, there used to be a generic HPPCL driver and a generic PostScript driver for older printers. You could usually use a "generic" driver just fine, because very few programs (other than page layout and graphic design) used even 1/10th of the capabilities of the lowest-common-denominator oldest version PCL or PostScript command set. Something like that DOES exist in the Mavericks print installation dialogue.
    But back to YOUR printer.
    I tried installing my HP LaserJet 1320 on my iMac running Mavericks*.
    Unlike Windows, you can't install a printer that OS X Mavericks cannot 'see', either directly connected or via a network 'share', or wirelessly.
    My HP is connected via a network share. This should not significantly change what happens when you install your printer, but no guarantees.
    This was my first attempt to install the HP, because my default printer is a Canon inkjet, connected wirelessly via WiFi.
    So the LaserJet is in another room physically connected via USB to a MacBook, and marked 'Share this printer' on the MacBook system preferences. The MacBook has to be awake (not sleeping) and in this case, physically connected for my iMac to 'see' it.
    So, when I clicked the + sign in the , System Preferences, Printers & Scanners to add a new printer,
    I entered the description HP LaserJet 1320 into the search box the first time, then
    1. Mavericks tried to "find" the HP LaserJet on the network, connected to the MacBook.
    2. "This printer requires software that is not installed..."
    3. "Downloading Printer Software Update..."
    4. "Setting up "HP LaserJet 1320 Series @ KoMtB (MacBook's network name)
    5. At that point the printer appeared in this Add window shown below:
    Note the bottom Use: window below Location...
    Note that the third choice is Generic PostScript Printer...
    THIS IS THE ONLY PLACE AND THE ONLY TIME you can apparently select anything about which printer 'language' the Mac is going to use to talk to your printer:
    In searching for about 10 minutes, I did not find any way to ever get BACK to this screen once the printer installation is complete, short of deleting and reinstalling the printer again, or adding the printer a second time with a different name.
    I selected the choice highlighted, HP LaserJet 1320 series. I did a test print from TextEdit, and it worked perfectly the first time. I also tried it from Pages, and again, it worked perfectly, no spewing of PostScript initialization strings...
    My suspicion is that maybe Generic PostScript Printer is getting selected by Mavericks somehow without ever informing the user.
    Maybe 'Auto Select' does it. Don't know.
    In any case, since you've already done a Printing System reset, you have nothing else (custom print job Presets) to lose by trying to reinstall it again.
    I tried it, and It SHOULD also be possible to install the same printer multiple times, PROVIDED THAT you rename each one slightly during the Add process (HP-3200, HP-Auto Select, HP-Generic PostScript... ), so you can give several of them a try until you find one that actually works.
    Now, here's how to find the 'generic' PCL printer driver...
    Add the printer again, giving is a new name.
    In Use: select "Select Software", then search for "HP LaserJet Series PCL 4/5"
    HP LaserJet Series PCL 4/5 driver IS a 'generic' PCL driver, and SHOULD work for basic printing, provided that you DO NOT use the slash between 4/5 in the printer name use a dash - instead. When I tried it with a slash (probably because it was a network share, the printer did NOT install. When I tried again and used a dash, it worked fine.
    The PCL 4/5 driver comes with a disclaimer as shown below:
    Your HP is apparently from the year 2000? (Mine is from 2004.) It's so hard to give up old workhorse friends, especially when one toner costs almost a much as a new printer. The good news it that newer LaserJets are WAAAAAAY faster, and a toner for a new model still costs almost as much as a new printer...
    After years of buying ONLY genuine HP toner, I finally purchased a generic toner cartridge online last year when I needed to print about 1500 pages. The high capacity generic refill cartridge cost 1/3 of price of a genuine HP 'standard capacity', and it works beautifully.
    Of course this is time consuming, especially when you have active kiddos competing for your time, but the last alternative after Gutenprint is to purchase a new printer.
    *DISCLAIMERS & FOOTNOTES:
    I don't use OS X Mavericks much, so I'm really not the best person to ask. But I did answer this thread ages ago.
    So, if none of this helps, please post your question again as a brand new message in the OS X Mavericks forum.
    That way it will likely get far more 'views' than posting your question in an old thread already marked 'solved'. 
    From what I've seen in the Apple Support Communities, those most knowledgable tireless Saints of Mac with tens of thousands of reputation points who frequent these forums most every day usually look for the 'unanswered' and 'unsolved' questions first.
    Mostly I use OS X 10.8 Mountain Lion, because that's what shipped already installed on my iMac that I purchased from Apple as a refurb in Dec 2013. And because 10.8 seemed more 'sorted out' than Mavericks did last December.
    When I got my iMac last December, I immediately installed OS X 10.9 Mavericks on an external drive that I could select at boot time because:
    1) I could get Mavericks for free (wasn't sure if it would be a limited-time thing)
    2) Purchase of a new or refurb Mac then included a free iWorks suite (Numbers, Pages, Keynote) latest versions (wasn't sure if it would be a limited-time thing)
    3) I have Windows 7 installed under Parallels 9 on Mavericks to run basically one legacy Windows application I spent years learning and still use once or twice a year. Honestly, almost the only time I use Mavericks is to run Parallels 9 and Windows 7 and that legacy Windows app.
    4) My original Mac is a mid-2007 MacBook is still running OS X 10.6.8. That's what the HP printer is connected to. I now use the MacBook for email or when I need to take a computer somewhere else. My MacBook is not capable of being upgraded to run Mavericks, and I wanted to at least know about the current version of OS X, even if I NEVER upgraded my main system.

  • MSS My staff reporting always returns blank page

    Hello,
    We are working with ESS(v60.2)/MSS(v60.1) Sap Portals 6.40 with ECC 5.0. We have a problem with the reports of "My staff". We are using the default scenario "RPT0" with the standard reports but when we execute them after choose the selection criteria the result always is a blank page, without any error or result.
    Can anyone help us? We have checked all the configuration/customizing...
    Many regards.
    Pablo.
    Message was edited by:
            Pablo García Sanz

    Hi,
    Are these webdynpro applications or ITS based screens ?
    Incase they are webdynpro applications, please check if the ess business package is deployed. You can go to Content Administration -> Webdynpro -> sap.com -> click on the application -> run as preview. Check if you are able to view it there.
    Check the iview properties and also check this link : http://help.sap.com/saphelp_erp2005vp/helpdata/en/e4/2eb47fed444bb885c244f5ff979f16/frameset.htm
    Hope this helps.
    Regards,
    Sunil
    PS: Reward points for helpful answers.

  • Print symbol '*' only on blank pages.

    Oracle have seeded vat Report which print symbol '*' at the end of the report i.e after printing Detail and summary.
    Now user need summary should be printed on Next page(This is achivable). and symbol '*' should be printed on blank pages after Detail & detail.
    e.g Detail infomration filled 80% of page then remainig 20% page should be filled by symbol '*' and if 100% page is filled by detail then no '*' is printed.
    Also same case with Summary. Summary always start with new page. once summary printed. reamining page should be printed by symbol '*'. If all page is blank then symbol '*' should not printed
    IS it possible in oracle reprot?

    The picture package in PSE/mac and PS always starts by filling the page with one photo. Then you click the "zone" (the image of any particular photo) for the photo you want to change out, and a dialog box pops up that lets you pick a different photo. You can also edit zones, create your own layouts, etc.

  • I can print from every app on my MacBook except with Firefox. Printing and print preview only produces blank pages???

    I have a MacBook Pro with Mac OS 10.6.4. Within Firefox, if I select File -> Print and then select preview a get a blank page. The same thing occurs if I sent the print request to my printer. I can print and preview from Safari and from any other application. Firefox is the only app that I can't print from.

    Is there anyone who can assist????

  • My print setup will not work and Fire fox only prints blank pages. Help?

    I tried to change the margins on my printer set up. Since I did this my printer will only print blank pages from Firefox. (If I open a PDF it prints fine) I have tried to go into print set up but it only comes up as a big black page. Any thoughts??

    Sorry, just to be clear:
    (1) Which did you use to make the change and which do not display correctly:
    orange Firefox button > Print > Page Setup<br>
    ''or''<br>
    classic File menu > Page Setup, or
    the Properties button in the Print dialog?
    (2) If you switch to a different printer, such as a PDF printer driver (many free ones you can install, such as [http://www.primopdf.com/ PrimoPDF] and [http://www.cutepdf.com/products/cutepdf/writer.asp CutePDF Writer]), can you regain access to Firefox's Page Setup dialog?

  • InDesign CS 5.5 does not print out image, just blank page

    I am printing to a Lexmark and when I print something from InDesign it will not print the image out. Sometimes it prints a blank page, sometimes it prints the border of the image, sometimes it actually prints the image. It is very intermittent but the majority of the time it doesnt print the image I am trying to print. I have tried messing with the printers and print drivers but nothing has worked. Is there something in InDesign that is wrong?

    As I said, sometimes ID and a particular printer driver don't interact well. Printing directly is not really a primary function from ID and it is what it is. Printing from PDF is faster and more reliable 99.9% of the time, presuming you export the PDF correctly. A good place to start, if you aren't doing color management iin the ID print dialog, would be to use the PDF/X-4 preset.

Maybe you are looking for