Why my T400 can not shutdown?
yesterday, I installed my Sierra Wireless MC8765 wwan card designed for lenovo on my T400. Almost every thing is ok, except my computer can not shutdown normal.
if I choice shutdown the laptop, it seems like closed, but the LIGHT in the front panel ( 4th from the left,just a letter[ 1] in it) is on.
if you listen careful you can hear the fan run, and the laptop is still on. I have to press the i/o few second to shut down it.
After I restart my computer the mistake go on.
anyone can tell me how to do this?
thanks very much!
I had the same issue on my T400. Get rid of the Client Password Manager, upgrade the fingerprint reader (if you have one) update the BIOS and every Thinvantage software on it.
My T400 now shuts down in about 5.8seconds.
Hope that works for you.
Similar Messages
-
[SOLVED] Can not shutdown/restart from KDE with systemd
Hello,
Recently, following I switched to a pure systemd setup. The process was simple and most things worked "right out of the bpx". However, I can not shutdown or restart from KDE!
Let's say that I do the 3 finger salute (ALT-CTRL-DEL) and select "Turn off computer" what I get is KDE shutting down, but then I will only get a console (TTY) login prompt. Pressing ALT-CTRL-DEL then will trigger a reboot. I can also login and use "systemctl poweroff". However, I don't understand why it doesn't work straight from KDE.
Are there some packages I must install? Are there some systemd services that I must enable? What other relevant info should I include in this post?
Active units :
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
proc-sys...misc.automount loaded active waiting Arbitrary Executable File Formats File System Automount Point
sys-devi...d-card0.device loaded active plugged MCP79 High Definition Audio
sys-devi...da-sda1.device loaded active plugged ST9500420ASG
sys-devi...da-sda2.device loaded active plugged ST9500420ASG
sys-devi...da-sda3.device loaded active plugged ST9500420ASG
sys-devi...da-sda4.device loaded active plugged ST9500420ASG
sys-devi...da-sda5.device loaded active plugged ST9500420ASG
sys-devi...da-sda6.device loaded active plugged ST9500420ASG
sys-devi...ock-sda.device loaded active plugged ST9500420ASG
sys-devi...et-eth0.device loaded active plugged RTL8111/8168B PCI Express Gigabit Ethernet controller
sys-devi...t-wlan0.device loaded active plugged AR928X Wireless Network Adapter (PCI-Express)
sys-devi...y-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devi...y-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devi...y-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devi...y-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-fuse.device loaded active plugged /sys/module/fuse
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
home.mount loaded active mounted /home
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
sys-fs-f...nections.mount loaded active mounted FUSE Control File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted /tmp
cups.path loaded active waiting CUPS Printer Service Spool
systemd-...d-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-...word-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
bluetooth.service loaded active running Bluetooth service
colord-sane.service loaded active running Daemon for monitoring attached scanners and registering them with colord
colord.service loaded active running Manage, Install and Generate Color Profiles
console-...daemon.service loaded active running Console Manager
console-...-start.service loaded active exited Console System Startup Logging
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kdm.service loaded active running K Display Manager
NetworkManager.service loaded active running Network Manager
sshd.service loaded active running OpenSSH Daemon
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-...s-load.service loaded active exited Load Kernel Modules
systemd-...unt-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-...rigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...ssions.service loaded active exited Permit User Sessions
systemd-...-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Storage Daemon
upower.service loaded active running Daemon for power management
wpa_supplicant.service loaded active running WPA supplicant
cups.socket loaded active running CUPS Printing Service Sockets
dbus.socket loaded active running D-Bus System Message Bus Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...control.socket loaded active listening udev Control Socket
systemd-...-kernel.socket loaded active running udev Kernel Socket
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
systemd-...es-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
72 units listed. Pass --all to see inactive units, too.
Last edited by Prozzaks (2012-08-20 17:35:48)Demon wrote:For me the system only halts, it does not poweroff. How I can solve this?
As bgc1954 said, there is also a symlink "/sbin/poweroff". Just edit the file "/usr/share/config/kdm/kdmrc", go to [shutdown] an replace the line "HaltCmd=/sbin/halt" with "HaltCmd=/sbin/poweroff". -
why my computer can not adjust the volume up and down althought i have had repair once time in a near day . i must waitting for 15days now it's continue
1. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Can not shutdown the server 206
Hello,
On adf & non-adf servers I am getting following error with opmn command
/apps/std/1022/opmn/bin/opmnctl stopall
opmnctl: stopping opmn and all managed processes...
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Can not shutdown the server 206
This happens more often than I like, and wondering what may be the cause?
This especially happens after I undeploy or deploy application.
Thanks
ss,
For OC4J we use the admin.jar:
http://download.oracle.com/docs/cd/B31017_01/web.1013/b28950/startstop.htm-Michael -
Why the ejb can not pass the complie?
I just use the work shop to create a simple ejb(SampleEJB.ejb) like:
package SampleEJB;
import javax.ejb.*;
import weblogic.ejb.*;
* @ejbgen:session
* ejb-name = "Sample"
* @ejbgen:jndi-name
* remote = "ejb.SampleRemoteHome"
* @ejbgen:file-generation remote-class = "true" remote-class-name = "Sample"
remote-home = "true" remote-home-name = "SampleHome" local-class = "false" local-class-name
= "SampleLocal" local-home = "false" local-home-name = "SampleLocalHome"
public class SampleEJB
extends GenericSessionBean
implements SessionBean
public void ejbCreate() {
// Your code here
* @ejbgen:remote-method
public void Hello(){
System.out.println("Hello");
* @ejbgen:remote-method
public void Hello2(){
System.out.println("Hello2");
but when i build it. The compiler give me error:
¾¯¸æ: SampleEJB.java:14: ÕÒ²»µ½ JNDI Ãû³Æ¡£
[Info:] Creating D:\DOCUME~1\Yong\LOCALS~1\Temp\/wlw_SampleEJB_build\SampleEJB\SampleHome.java
[Info:] Creating D:\DOCUME~1\Yong\LOCALS~1\Temp\/wlw_SampleEJB_build\SampleEJB\Sample.java
[Info:] Creating D:\DOCUME~1\Yong\LOCALS~1\Temp\/wlw_SampleEJB_build\META-INF\ejb-jar.xml
[Info:] null [Bean] MAKE CLASS NAME G:SampleHome P:SampleEJB N:SampleHome
[Info:] null [Bean] MAKE CLASS NAME G:Sample P:SampleEJB N:Sample
[Info:] Creating D:\DOCUME~1\Yong\LOCALS~1\Temp\/wlw_SampleEJB_build\META-INF\weblogic-ejb-jar.xml
[Info:] Creating D:\DOCUME~1\Yong\LOCALS~1\Temp\/wlw_SampleEJB_build\ejbgen-build.xml
SourceLoader roots: 10
post-ejbgen:
¾¯¸æ: EJBGen ok. Compiling...
Compiling 3 source files to D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build
¾¯¸æ: All files compiled. Running ejbc...
<2004-5-3 ÏÂÎç16ʱ20·Ö17Ãë CST> <Warning> <EJB> <BEA-010212> <The EJB 'Sample(Jar:
D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build)' contains at least one method
without an explicit transaction attribute setting. The default transaction attribute
of Supports will be used for the following methods: remote[Hello2(), Hello()]
>
SourceLoader roots: 60
D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build\SampleEJB\Sample_vngkt3_HomeImpl.java:13:
cannot resolve symbol
symbol : class SampleHome
location: class SampleEJB.SampleEJB
implements SampleEJB.SampleHome, weblogic.utils.PlatformConstants
^
D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build\SampleEJB\Sample_vngkt3_HomeImpl.java:69:
cannot resolve symbol
symbol : class Sample
location: class SampleEJB.SampleEJB
public SampleEJB.Sample create ()
^
D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build\SampleEJB\Sample_vngkt3_EOImpl.java:15:
cannot resolve symbol
symbol : class Sample
location: class SampleEJB.SampleEJB
implements SampleEJB.Sample, weblogic.utils.PlatformConstants
^
D:\DOCUME~1\Yong\LOCALS~1\Temp\wlw_SampleEJB_build\SampleEJB\Sample_vngkt3_HomeImpl.java:73:
cannot resolve symbol
symbol : class Sample
location: class SampleEJB.SampleEJB
return (SampleEJB.Sample) super.create(md_ejbCreate);
^
4 errors
´íÎó: ERROR: Error from ejbc: Compiler failed executable.exec
´íÎó: ERROR: ejbc couldn't invoke compiler
BUILD FAILED
´íÎó: ERROR: Error from ejbc: Compiler failed executable.exec
´íÎó: ERROR: ejbc couldn't invoke compiler
Why? who can give me a handI met the same problem. I am a newbie, but why weblogic even can not build a simple startup ejb project?
-
why my iphone can not be activated when I updated to IS06?
My iphone is 3gs 8g, and original locked but now it's offical unlocked before i updated to ISO6.
iphone information:
iphone 3gs
Model:MC640LL
SN:84xxxxEDG
<Edited By Host>That means your phone is now a brick. Congratulations.
That's a risk you take when you decide to hack the phone.
You can't get any help here. Discussing hacked and jailbroken devices is forbidden by the terms of service.
Maybe you can find something on google that will help you. -
why my spotlight can not find my personal files ? It can find them before but can not find them now,I want to know why?
From the menu bar, select
▹ System Preferences ▹ Spotlight ▹ Privacy
The list of items excluded from Spotlight indexing is shown (it may be empty.) Click the plus (“+”) icon to add an item to the list. Select your boot volume (under DEVICES) and add it to the list. Then remove it from the list by selecting it and clicking the minus (“-“) icon.
Spotlight will rebuild the index. If you try to do a Spotlight search now from the magnifying-glass icon in the top right corner of the display, a pulsing dot will appear in the icon. When the dot disappears, the indexing is complete. -
Opmn 'Can not shutdown the server 206'
Hello,
On adf & non-adf servers I am getting following error with opmn command
/apps/std/1022/opmn/bin/opmnctl stopall
opmnctl: stopping opmn and all managed processes...
opmnctl: graceful stop of processes failed, trying forceful shutdown...
Can not shutdown the server 206
This happens more often than I like, and wondering what may be the cause?
This especially happens after I undeploy or deploy application.
Thanks
sThanks shail,
I didn't see any useful error in opmn.log or ipm.log
didn't see any error in log/states/* either
Currently my script ignores the shutdown errors and call startall
However I see following errors (shutdown appears to be ok) in opmn/logs/OC4J~spfstd~default_island~1 log file
09/04/20 12:01:24 Stop process
09/04/20 12:01:27 Shutting down...
09/04/20 12:01:27 JAM Agent: jaminit.destroy()
09/04/20 12:01:27 JAM Agent: jamagent.destroyJam() called
JAM Agent: Shutdown signal received, shutting down
09/04/20 12:01:27 JAM Agent: Shutdown complete
09/04/20 12:03:37 Start process
09/04/20 12:03:58 log4j:ERROR setFile(null,true) call failed.
09/04/20 12:03:58 java.io.FileNotFoundException: /logs/idp/idp.log (No such file or directory)
09/04/20 12:03:58 at java.io.FileOutputStream.openAppend(Native Method)
09/04/20 12:03:58 at java.io.FileOutputStream.<init>(FileOutputStream.java:177)
09/04/20 12:03:58 at java.io.FileOutputStream.<init>(FileOutputStream.java:102)
09/04/20 12:03:58 at org.apache.log4j.FileAppender.setFile(FileAppender.java:272)
09/04/20 12:03:58 at org.apache.log4j.RollingFileAppender.setFile(RollingFileAppender.java:156)
09/04/20 12:03:58 at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:151)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:247)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:123)
09/04/20 12:03:58 at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:87)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:645)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:603)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(PropertyConfigurator.java:524)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:408)
09/04/20 12:03:58 at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:432)
09/04/20 12:03:58 at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:460)
09/04/20 12:03:58 at org.apache.log4j.LogManager.<clinit>(LogManager.java:113) -
Why my firmware can not be upgraded?
Why my firmware can not be upgraded? Do any one encounter the same problem? How can i fix It!!
Hi BigFatCatMan,
sorry I missed your earlier response.
Assuming that you have tried downloading a "fresh" copy of the appropriate firmware update from http://www.apple.com/support/downloads/ and it still doesn't work, you might want to consider the firmware restoration CD process discussed at http://docs.info.apple.com/article.html?artnum=303469 and available through http://www.apple.com/support/downloads/firmwarerestorationcd13.html or http://www.apple.com/support/downloads/firmwarerestorationcd14.html (depending on precisely which MBP you have).
Messing with firmware is always a tad risky, though, so that visit to a Genius bar might be worth trying, given the repeated anomaly.
Rod
Message was edited by: Rod Hagen -
why do I can not hear the siri's voice on my iphone speaker anymore, why do I can not hear the siri's voice on my iphone speaker anymore
All apps - all paid and free apps include DRM protection that is tied to the iTunes that was used to download the apps. This means you have apps on your iPhone that were downloaded with your daughter's iTunes account. Apps cannot be transferred or merged with another iTunes account.
Delete the apps from your iPhone that were downloaded with your daughter's iTunes account to prevent being prompted for the account's password when there are app updates for the apps downloaded with the account. An iTunes account cannot be deleted. -
Why my ipad can not update the ios7.1.1
why my ipad can not update the ios 7.1.1
Hello there, crivera350.
The following Knowledge Base article offers up some great steps for if you are unable to update your iOS device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
Turn off your device. If you can't turn it off, press and hold the Sleep/Wake and Home buttons at the same time and wait a few seconds for it to turn off.
Plug the device's USB cable into your computer only.
Hold down the device's Home button as you connect the USB cable to it.
When you see the Connect to iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 one more time.
iTunes should open and display a message such as: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Use iTunes to restore your device.
If you don't see your device in iTunes, follow these steps for Mac or these for Windows.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I do not know why, but I can not go to the App Store! before I went there without any problems but now I can not connect with App Store
Open the Finder. From the Finder menu bar click Finder > Go > Go to Folder
Type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.
Try the App Store. -
Why att store can not help for unlocking the phone
I followed the instructions to unlock our two old iphones after having iPhone 6. I received "unlock" message for one phone and did not receive the message for other phone. I am not sure if the phone has been unlocked. I went to AT&T store at Bridgewater Commons, NJ. and like to know if it Is unlocked. I was told that they can not tell and I need go to T mobile store to find out. I stopped by T mobile and found out the phone is still locked. So I went back to the AT&T store to try getting help. Because I already tried to unlock this phone three times before. There were 10 ATT people in the store and only two or three customers there. I asked one of employees to tell me what I need to do. I was told that they do not have the service to help unlocking and I need to call customer service. I said to her that you have 10 employees here and why can not help, I would like to speak to the store manager. The store manager Dawn was there and she told me the same thing. They can not help and I need to call the customer service. I kept asking but why you can not help. Finally she said that she can help me to call the customer. She called and the phone was not go through. Finally the employee asked me the phone number and I thought that maybe she will help me to unlock. Actually she just made another unlock request online for me and I need to wait the email in 24 hours and redo the unlock process later. I would to know why att store can not help the customers to unlock their old phones after getting the new phones. Why att keeps 10 employees in one store and can not help to solve customer problems.
Xiyufu wrote:
... I would to know why att store can not help the customers to unlock their old phones after getting the new phones. Why att keeps 10 employees in one store and can not help to solve customer problems.
AT&T keeps 10 employees at a store in case they need them to assist customers with purchasing items, or with items recently purchased.
The Store representatives can't help you with the unlock portion because it requires access to systems they are not authorized to access. If store employees could access the unlock system (other than the very same portal you can access) then there would be a high risk that there would be inapropriate unlocks by employees for their friends & relatives. AT&T's solution is to not allow them access to those systems, and have everyone go through the same process so that everyone gets the same treatment. If you are having problems with your unlock requests through the portal, try contacting customer support or you can send a private message to the escalation team at ATT Customer Care and someone will get in touch with you in two to three business days to help you get a resolution to your problems.
To check for their reply, click the little blue envelope. in the top bar near your username. -
Why db mirror can not set db recovery model to simple?
Hi ,All
I have a question .
DB replication can set db recovery model to simple ,why db mirror can not db recovery model to simple.
DB mirror must be set to full recovery model.
As far as I know, whatever db mirror and db replication ,there is a log reader to read the log in the ldf file
DB mirror and DB replication are almost the same principle to replicate the db to another db server
Thanks a lots
Love SQLDatabase mirroring involves redoing every
insert, update, and delete operation that occurs on the principal database onto the mirror database as quickly as possible. Redoing is accomplished by sending a stream of active transaction log records to the mirror server, which applies log records to the
mirror database, in sequence, as quickly as possible. Unlike replication, which works at the logical level, database mirroring works at the level of the physical log record.
There is no log reader agent in case of mirroring its more internal. Mirroring
uses the transaction log to redo everything at the mirror site. In simple recovery model, the transaction log is effectively transitory and only enough information is kept in the log for undo/redo to keep the database consistent during
crash recovery. Thats why mirroring does not work in simple recovery model. -
Why Oracle9i statement can not add " ; " in java ?
Hi,
I have a following java programme:
import java.sql.*;
public class Result1 {
public static void main(String args[]) {
Connection con = null;
try {
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
System.out.println("JDBC driver loaded");
con = DriverManager.getConnection
("jdbc:oracle:oci:@xxxxxx","xxx","xxx");
System.out.println("Database connection established");
ResultSet rs=null;
String user_id1="user101";
String queryString = ("SELECT * FROM fixed_asset;");
PreparedStatement stmt = con.prepareStatement(queryString);
rs = stmt.executeQuery();
while (rs.next()) {
String s2 = rs.getString("db_id");
System.out.println(s2);
catch (ClassNotFoundException cnfe) {
System.out.println("ClassNotFoundException: Could not locate driver");
} catch (SQLException cnfe) {
System.out.println("SQLException: Could not connect to database");
} catch (Exception e) {
System.out.println
("An unknown error occurred while connecting to database");
} finally {
try {
if (con != null) {
con.close();
} catch(SQLException sqle) {
System.out.println("Unable to close database connection.");
This prog can be compiled, but when it run it show can't not connect to database.
But when i remove the ; in the queryString such that
String queryString = ("SELECT * FROM fixed_asset");
It can complete show the result i want .
Why it can not support ";" and how can i add two execute statements at the same time?
Thx ,
RickyWhen you include the semicolon, the error is generated when you execute the statement and probably indicates an invalid character error. Your error handler is assuming that any SQLException indicates that the program was unable to connect to the database, which is an incorrect assumption. Including a semicolon in a standalone SQL statement is invalid syntax.
In Oracle, you cannot pass a semicolon separated list of SQL statements to the database to be processed. If the statements are related, however, you can use an anonymous PL/SQL block to achieve the same result, i.e.
BEGIN
<<statement 1>>;
<<statement 2>>;
<<statement 3>>;
END;Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
Maybe you are looking for
-
Brand New Ipod Shuffle 4th Gen Buttons Don't Work?
I just bought my mum an Ipod Shuffle 4th Gen for Mother's day. I just set it up on the computer, ripped some of her CDs onto iTunes, let the iPod charge a little and synced it up with her songs. Turned it on, music started - then I pressed the 'next
-
After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...
-
My developers have come up with a query that is hogging CPU and leading to unacceptable execution times. My initial analysis is that the problem is caused by the fact that the query is heavily parsing XML data with multiple calls to getClobVal() and
-
My Ipad Air is not showing in my itunes account, after I have gone through all the steps and download all my information from my previous ipad
-
Finding Parent Table of Index Organized Table
I am using Oracle 10g Rel 2 and faced error message while granting select priviliges ORA-25191: cannot reference overflow table of an index-organized table I searched solution and found: Issue the statement against the parent index-organized table co