Why my tax reporter number range is running so fast?

hi experts,
I really don't know why my tax reporter number range is running so fast. I ran the tax reporter for only like 15 times for only 30 employeess in production but the tax reporter number range goes upto 9234. why is that so. how does numberrange in tax reporter works and how do i fix it.
Thanks,
Rahsmi

Thanks for that. Arun, i checked that but its like this which is standard SAP thing
no.     from         to   current number    EXt.
1       1           8999    20
99      9000     9999      9659
Ext. is not checked, so its all coming internally. what u say?

Similar Messages

Why most of the number range are maintain year wise

Hi,
I want to know why most of the number range like Part1 and part2 57F4 Challan goods issue , GR, number range are maintain year wise.
regards,
zafar

Hi ,
There may be a lots of documents in a business . But SAP has provied limited no for documents ( upto 999999999). So if you are running your business for a long time , it may happen that the no. of documents may go beyond this no.Year wise no range allows us to use the same no . in another year . So that the combination of fiscal year and document no is sufficient to uniqly identify one document .
Regards,
Anupam

Withholding Tax Certificates Number Range

Hi All,
There are two options in SPRO setting to configure Withholding Tax Certificates:
1) FA->****->WT->EWT->Posting->Certificate Numbering for Withholding Tax.
another option
2) FA->****->WT->EWT->Posting->India->Withholding Tax Certificates for Vendors and Customers:
I had applied both the method but still Certificate Number is not printing while running J1INCERT.
Please help why number is not getting printed.
Regards,
Ankur

Hi All,
When I give the print command system did not throw any message this time and excute the print and assign certificate number as per J1INMIS Report but due to some technical reasons print did not came out of the printer.
Now, when i again reprinting certificate from J1INCERT then system is showing error message " No data selected for printing"
Can anyone tell me how to take reprint of certificates and what would happen to earliar assigned certificate number range.
Further, I have taken the print earliar without TDS Certificate Number but acknowledgement number was getting updated and successfully reprinting from J_1IEWT_ACKN_N Table, but now this is also showing blank.
Please help.
Regards,
Ankur

Why does it report missing *.dll when running standalone programs on a separate PC without LabVIEW?

I wrote a LabVIEW code to control GPIB, DAQ and Serial port. Then I built an installer including runtime engine. Everything works fine at the PC with the LabVIEW. I copy this installer folder to another computer without LabVIEW. I had no problem to install the program. But after I run the program, it started to ask for nilvaiu.dll. After I copied it under C\Windows\System32\, it started to ask for nimdbgu.dll, then niorbu.dll. Then it reported "The procedure entry point_pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll"
I guess it missed some drivers. So I installed NI-488.2 for Windows on the PC. But it did not solve the issue.

hi there
i recommend to update to DAQ 7.4. the performance is much better.
best regards
chris
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

US Sales Tax Report is running for more than 10 hours

Hi All,
Could any one please suggest us on below issue.
We have observed that "U.S. Sales Tax Report" Concurrent Program is running for more than 10 hours in R12 Production. The system has been upgraded from 11.5.8 to R12. Earlier in 11i, it was running for 1 hour and post upgrade its running more than 10 hours. As this program is a standard Oracle program, We are taking up this issue with Oracle support. But we wanted to know does anyone has the similar issues faced.
Many thanks,
Praveen

Pl do not post duplicates - US Sales Tax Report is running for more than 10 hours

Chinese "Government Tax Invoice" number

Hi Experts,
How and where to enter/store the official Chinese "Government Tax Invoice" number, if both document header fields (BKPF-BELNR & BKPF-XBLNR) are filled already?
AND which report has to be run out of SAP for printing official Chinese voucher (Document overview, document list or something similar) to fulfil tax authority requirement.
Please provide me the details. Please help me if there any links for Chinese Localizatoin
Thanks

Hi
Ideally if it is configured for SD then VBRK-XBLNR and BKPF-XBLNR would be filled with the tax invoice number which is a 16 digit number. For your F1 invoice type check the accounting document type generated. It would mostly be RV.
You need to set up this accounting document type to consume the tax invoice number range. I guess FB70 transaction would be associated with accounting document type DR which is configured to use up the tax invoice number range.
So follow these steps:
1. First check the accounting document type created for the invoice of type F1.
2. Go to SPROCross Application Component-General Application FunctionsCross-Application Document NumberingIndonesia--Document Numbering
3. Check the document class created for country ID.
4. If document class is created as I guess it has been because you can already generate the number through FB70 transactions then check if accounting document type created from F1 invoice is assigned to the document class.
I guess it is this setting which you are missing. As a result of this tax invoice number is not getting generated for SD documents.
Thanks
Indranil

Generating Tax Invoice Number for deferred taxes (Thailand)

Hi all,
I'm implementing deferred taxes for Thailand, and am attempting to generate an internal tax invoice number for vendors during the running of the program "Transfer Deferred Taxes".
I've set up the number ranges & intervals, number groups, created a dummy document class, and activated official document numbering for document type SA, which I'm using for the transfer posting.
However, when running the program "Transfer Deferred Taxes", I'm prompted to key in a tax invoice number of my own, which means that the system is not generating the number for me. How can I get this to work?
Thanks,
Daniel

Hi
Ideally if it is configured for SD then VBRK-XBLNR and BKPF-XBLNR would be filled with the tax invoice number which is a 16 digit number. For your F1 invoice type check the accounting document type generated. It would mostly be RV.
You need to set up this accounting document type to consume the tax invoice number range. I guess FB70 transaction would be associated with accounting document type DR which is configured to use up the tax invoice number range.
So follow these steps:
1. First check the accounting document type created for the invoice of type F1.
2. Go to SPROCross Application Component-General Application FunctionsCross-Application Document NumberingIndonesia--Document Numbering
3. Check the document class created for country ID.
4. If document class is created as I guess it has been because you can already generate the number through FB70 transactions then check if accounting document type created from F1 invoice is assigned to the document class.
I guess it is this setting which you are missing. As a result of this tax invoice number is not getting generated for SD documents.
Thanks
Indranil

Same number range for two different series groups?

Dear all,
There are two scenarios
1.Normal export under bond case, series group is 20 and number range maintained,running number is 300016
2.Another scenario,where ARE1 document generation for Deemed exp customer(already customised) , series group is 30.
But, client requirement is , for this second scenario also, system should pickup running number range of series group 20(under bond case) as per excise legal requirement
Ie running number is for series group 20 is 300016
For the above deemed exp case (second scenario)it should pickup 300017
And again when they do under bond case(first scenario), it should pick up 300018 like that
Is it possible to maintain the same number range for two different series groups(20 and 30)?
Even if you maintain the same number range for 30, as per running number range of 20
Will the system update simultaneously the same number range for 20 and 30 series groups?
Please suggest the way.

With two different series groups, it is not possible to have the same number range. Even if you maintain it, they will be treated independently.
Normally, you should not use different series groups if the same number range has to be used. In fact, the concept of series group has been developed to ensure that number ranges can be maintained separately.
Regards,
Aroop

Problem in Number range Interval in VF02

Hi All,
I am using Number range USEREXIT for invoice creation- VF01.
So, while creating invoice, userexit will trigger, as per our logic provided,system generating numbers as expected.- which is working fine.
Where as, in VF02, transaction , i was trying to release invoice to Accounting,
system prompts with the below error message.
Fyi, in my invoice doc type: Number range- interval-19, which has numbers mentioned in the error message below:
am expecting, that when i release invoice to accounting from VF02 transaction, system triggering number range from invoice doc type,- But I dont understand, why it is triggering number range interval again, for which number is already createed in VF01
Error Message:
Incorrect doc.no.: 9003000002. Select document number between 0090000000 and 0094999999
Can someone, have any inputs??
Thanks in advance

Hi,
You can make use of exit userexit_number_range inside RV60AFZZ.
Regards,
Babul.

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Current Number Status in Number Range

Hi All
Plz tell me the table in which status of Current Number is stored. That always increment in the Number ranges while running related Tcode.
Like i am running a BDC program and for that transaction at the run time i want to compare some number with current Number Status of the Number Range.
How will i do? Thanks in advance.
Regards
Ravi Arora

Hi Ravi,
There are a lot of FM's ( NUMBERRANGE* ) from se37 which can be used to get the information you need.
Check them you might not need to code to get the current number, The FM will do for you.
Regards
VJ

J_1IINTPR2 object which transaction is creating this number range.

J_1IINTPR2 : Despatch serial Number Excise Group:21
Current Number range is running ,in SNRO but i want to know where this number is generating in data base Tables
and in which sales transaction is creating this number range.

Hi,
This no. range is asigned at J1I9 also,
it will be generated at J1IIN.

Production Order Number Range - Not Continuous

Hi Team,
I have assigned the internal number range for my order type in CO82. When the system assigns the internal number (my production order is 10 digit number) to my production order, the number is getting assigned continuously. For example, if the last created production order number is 2481000001 , i am expecting the next number as 2481000002. But system is creating some number like 2481000023. In-between many numbers are missed. Why?
Production Order Number Range Assigned: From: 2481000000, To:2481999999 (Internal Number range)
Thanks

Hi Caetano,
As described in the note 62077, i can do the following setting.
1. Deactivate buffering: Choose 'Edit' -> 'Set Up Buffering' -> 'No Buffering'.
2. If you want to change the buffer size only, enter the corresponding value in the field 'No. of numbers in buffer'.
Case 1:
If i activate the option "No Buffering" for object "auftrag", will it have any negative impact like performance of the system?
Should i need to activate the option "No Buffering" for object "auftrag" before creating the production order?
Case 2:
I do not want to deactivate the buffering. But i will set the 'No. of numbers in buffer'as ONE (1). I think with this settings, the numbers will be always continuous. Will it have any system performance impact?
Thanks

Multipe number range for indonesia tax invoice no.

Hi All,
I have one question to confirm with you all:
Our indonesia office need to print out tax invoice when billing document is created.
The format is TTS.BBB-YY.NNNNNNNN , and only TTS is fixed, the other 13 digits changes.
And we can only get one number range from tax office for almost one month's usage, which means we can not maintain the number range for one whole year in one time.
Question 1: How to maintain mulitple of number ranges for one year:
I'm thinking if we can maintain different number in table "V_OFF_NUM_ID"
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/01/01 – 2014/12/31 902    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
But the "code 2" is same sometimes, so I have to do so
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/03/28 – 2014/12/31 901    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
But if so, I don't know when the billing date is after 2014/03/28, and the number "03" is not used up, system will pick number range of 04 or 03?
Question 2:
The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
The SAP standard use new tax invoice no.
How to realize it?
Question 3:
YY is year and defaulted from billing date?
Thanks and best regards
Cathy

You are correct that this is statutory requirement, and SAP deliver the solution, you can refer to note
1033737 - Indonesia: Tax Invoice & VAT Reporting 1107 .
However, from 04/2014, the requirement changes
TTS.BBB-YY.NNNNNNNN
Before: Only NNNNNNNN changes and SAP suggest using one number range
Now: BBB-YY.NNNNNNNN changes, and there are quite a few number range per each year.
Can not get one number range for one whole year.
Therefore, I raised my question as above. However, I think I have answer to my question, just I'm looking for one more perfect solution if there is:
1> The answer for 1st question
When the "code 2" is same sometimes, I will maintain as below
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/03/28 – 2014/12/31 901    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
By testing, only if the number of 03 is used up even though the billing date is 2014/04/01, the number 04 will be used, so should be okay.
2> The answer for 2nd question
The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
The SAP standard use new tax invoice no
Since there are only 3-4 reversal per year, so user can realize it by changing the "current number" in J1AB
You mentioned it in
http://scn.sap.com/thread/3519329
but I did not try until I'm sure it will work
3> YY
I think it's should be from billing date.

Number range for production order is running out! Please help..

Hi,
Our number range for the production order is running out, can anyone please guide me how to extend or create a new number range?
I try to go to CO82, there is no where for me to add a new range. Also, I can't extend continuosly the number range cause the next number already assigned to another order type.
What can I do?
Kindly please help. Thank you.

Hi,
All i would suggest before fixing on the number of digits, look at your past pattern. Estimate the number of orders which you plan to create for a given order type, based on that select the number of digits.
Now if you wish to increase from 7 to 8, its fine, it will not be an issue, once you define the number range, system will throw a message if it overlaps, so you can be rest assured about that. Assign the new number range to the order type & standard SAP will take care of the rest. However if you have any custom reports / developments, just ensure that there is no hard coding to read only 7 digits. Apart from that it should work fine.
Hope the above resolves the issue.
Regards,
Vivek
Added
Please do not amend the existing number range or do any modifications to the same, it will lead to inconsistencies. So create a new range & assign the same to the order types
Edited by: Vivek on Mar 13, 2009 10:43 AM

Why my tax reporter number range is running so fast?

Similar Messages

Maybe you are looking for