Why my the hardrive getting full automatically

My macbook pro has OS Mavericks 10.9.1 and its running very slow. The hard disc space is also getting full everyday even though i have deletated so many music files and videos

For information about the Other category in the Storage display, see this support article.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running the app as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Similar Messages

  • HT204291 Why can't I get full screen from my ipad to Apple TV

    Why can't I get full screen from my ipad to Apple TV?

    Welcome to the Apple Community.
    Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
    You may wish to try each of the settings in settings > AirPlay > Adjust for Overscan for the best setting that suits you.

  • FRA - Does the archives get purged automatically

    Hi ,
    We have a datagurad setup . Primary and standby . FRA has been confiured on both primary and standby . RMAN backup is configured for primary . We are not taking standby database backup .
    I would like know whether the archivelogs on standby will be purged automatically by oracle when the FRA gets full , or do we have to manually clean up the archive logs.

    AFAIK, you will need to manually clean up the archive logs.
    You could have it done automatically if you have either setup a detention policy for your FRA and scheduled a job that deletes obsoleted files upon the policy or using a batch file do the work and schedule it to be executed periodically in order to keep your FRA clean and save disk spaces.
    Well, this is my opinion. Let's see what others have a say on this.

  • HT203167 Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

    Why do files that I have organized into folders not stay in their folders after closing and reopening iTunes? And Why does the renaming get undone? I do this in iTunes Media/ Music.

    I recently had to reinstall my software for a
    dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
    The 2131 usually indicates firmware needs to be updated on a drive.
    Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

  • My Iphone 4 screen has gone blank... If someone calls the person gets full ring but no display on my screen... niether home button nor power off button is working... help!

    my Iphone 4 screen has gone blank... If someone calls the person gets full ring but no display on my screen... niether home button nor power off button is working... help!

    Try press and holding down the Power and Home button until you get an Apple icon on the screen.
    http://support.apple.com/kb/ts1445

  • Why did the videos get taken from festival?

    Why did the videos get taken from festival?

    Ten days and still no reply. Thanks, Apple. It's companies like you and EA that make me think you guys are only in it for the money. I payed $2.99 for this dn app and no refund. But it doesn't matter anymore because I jailbroke my iPod and got the app back. Looks like you lost a customer.

  • Why SO Header not get closed automatically after all SO lines get closed?

    Hi all :
    Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
    If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
    And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
    Thank you in advance
    Edited by: Daniel on Jan 18, 2011 8:41 AM

    Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
    Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
    For more detail please see Note:141919.1 on Metalink.
    Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
    Hope this helps,
    Sandeep Gandhi

  • Why can't I get full screen when in Safari since I downloaded ios8

    WWhy since I downloaded ios8 can't I get full screen when in safari

    Have you tried tapping the blue bookmark icon on top left of screen?

  • ADF: All the InvokeExecuteWithparams getting executed automatically

    Hi,
    In my ADF page i have 13 executeWithParams and corresponding invokeExecteWithParams, when i click on any of the button or link all the executables are getting fired automatically thereby decreasing the performance of the application. On all the invokeExecuteWithParams i have given the refresh property = 'ifNeeded' then also this issue is coming.
    Kindly let me know how to resolve this issue.
    Thanks in advance,
    Kalpana.

    JDev version is 11.1.1.5.0
    yes they are invokeActions. Each invokeAction should be fired only when method is called through the backing bean but all the invokeActions are getting called on each button/link. I did not specify any refreshCondition on any of the invokeActions. I just specified the Refresh=ifNeeded tats it!
    How does #{adfFacesContext.initialRender} help in resolving this issue, kindly explain.

  • My macbook pro can see the network, gets full signal, but won't connect.  When I run diagnostics, it automatically connects, but only if I run the diagnostics.  Why won't it connect by itself?

    Macbook Pro won't auto connect to wifi, but when I start diagnostics, then it will connect.  It seems it requires diagnostics in order to get connected to wifi.
    any ideas

    SOLUTION! 
    I've been suffering from this problem for a few months.  I tried everything suggested by everyone, and then, today, I had a mad idea. 
    I used to work in a room in the house that's about 12 metres away from the router. It's on the next storey up and horizontally about 8 metres away.  The problem started when I began to work in the same room as the router. 
    Today I became so frustrated that for some reason I walked into a room about 8 metres away on the same level - Guess what?  I connected with no problem at all. Feeling full of joy I walked back to the room where the router is located - Dropped internet connection within a few minutes!  Walked back to the the room that's 8 metres away and, hey presto! I have a connection. I now realise that the problem was that I moved too close to the router.
    I can think of no logical explanation for my experience, but empirically it seems to work.  Does anyone have the faintest idea of why this should be the case?  In the absence of an answer I think I may have to start believing in fairies at the bottom of the garden - I'm just off to set a meal for them.
    By the way, I don't know if it has any significance, but the router is a BT Infinity router that has replaced the incredibly unreliable Virgin Media cable connection

  • Why does the latest flash update automatically install Mcafee?

    Just wondering why I can't opt out of installing unwanted software when updating flash player?
    For reference:
    - I turned on my computer and was faced with a regular looking flash player box that stated an update was available.
    - I clicked the "update" button and was taken to the following page: https://get3.adobe.com/flashplayer/download/?installer=Flash_Player_13_for_Other_Browsers& os=Windows%207&browser_type=Gecko&browser_dist=Firefox&a=McAfee_Security_Scan_Plus_FireFox _Browser&dualoffer=false&type=au&browser_vers=28 (yes it mentions Mcafee in the address, but only the address. No warning whatsoever on the actual webpage. I wasn't aware that it would automatically install Mcafee without asking).
    - I saved the update, then ran it (there were no checkboxes at all to opt out of Mcafee, it just installed it).
    Not particularly happy at having unwanted software installed with no real warning, and no opt out available.
    Win 7 x64 updating flash to v 13.0.0.182

    http://forums.adobe.com/thread/1395219
    That one goes back three updates ago, and http://forums.adobe.com/message/4315988  goes back two years...
    This has been an ongoing thing. There is an updater that blindly installs McAfee and another that installs Google Chrome and Toolbar. People have been complaining about it for years, and it doesn't change, and it won't change.
    I'm not being condescending, and I'm not trying to lecture you on this. I'm just stating the facts. If there had been any intent on anyone's part to do something about it, posts like this wouldn't pop up here every month and a half, like clockwork.
    It's the number one reason we post the FULL installer links. Because they have NOTHING IN THEM but the Flash Player plug-in.

  • Why did my hardrive get wiped clean when I did a simple system update?

    On May 4th, 2010 my eMac, which is running Mac OS X (10.4.11) did it's automatic system update. I bought this eMac it was a refurb from eBay. I never had a single problem, it ran perfectly fine when I had tested it out, everything was great. I transferred some photos and music from my old Windows computer to the "new" eMac, and some of the music was newer and needed a system update to work properly. I thought nothing of it so I went to www.apple.com and looked for the update, found it, and started it. I had went ahead and stepped away while it updated to pass the time. Once I had gotten back I went ahead and restarted the computer like you must do with every update, when I had logged back in, my hard drive was wiped clean. At the time I was a little perturbed to say the least, but I passed it off as it not having an update in so long that it had just, more or less, reinstalled the new system update. Once again I passed it off not thinking anything of it, never had another problem out of it at all. I had put a many of programs such as Adobe Photoshop CS3, Adobe Audition, Dreamweaber, Garageband (full version), djay v3, and I had even JUST put Logic Studio on it, and many others. After putting, more or less, my entire livelihood on the eMac, (I create website designs, various ads, freelance photography and videography, and a verity of other logos, designs, insignia, emblems, ect...) it did another automatic update, now my ENTIRE hard drive is wiped clean. I no longer have possession of my software discs due to someone stealing them along with all my audio cds, and dvds. I don't have the money to spend on new software, (altogether my software added up to just over $2.5k) and now I am already feeling the effects. What can I do? Will Apple even help?

    As for your comment on this being my first Mac, and the program issue, you misunderstood. Yes the eMac is in fact my first, personally owned, Mac computer other than the original Apple II series floppy fed PC, in which me and my father owned. The only other Apple/Macintosh computer I had experience on was my father's 13" MacBook Pro, and 20" iMac (both ran OSX Tiger 10.4.11, just as the one I have know runs). The iMac was upgraded to Snow Leopard due to our need for better picture/video/audio editing software such as that of Adobe, and the Macbook Pro was sold because of a business that was started being siphoned out of money. I purchased the eMac from a small business based off of eBay. It had the majority of OSX Tiger software, only missing minor programs like Photobooth. Other than that, it had no wireless software like BlueTooth, Wi-Fi capabilities, wireless sync, ect... But alas, when you buy a Apple/Mac computer, you must take a few cutbacks when purchasing it (even refurb.) for around $120.00 including taxing, shipping, handling, ect... I purchased nearly all of my software from co-workers and friends who had an extra key, or I would receive the software disc from them, and buy a key. The only "illegal" thing I had on the computer was music I had downloaded from LimeWire. I have never, and will never, trust any software coming from a torrent download site.

  • Why does the menu get cut off even if the project is widesrcreen?

    I made a widescreen project in iMovie, exported it to iDVD, and chose a widescreen theme. It looked fine on my computer but when I burned it and played it on my home DVD player, the words were cut off. I also noticed that when played on some TVs, my movie (although widescreen) played as full screen and therefore, cut off some of the footage. Does anyone know how to fix this?

    HOW TO MAINTAIN 16:9 ASPECT FROM IMPORT TO BURN
    This is the way I do it. There is no compulsion on you to do it my way, but this works (for me). I started this method before iMovie and iDVD were upgraded to 6.0.3, and because not all elements of the various iDVD themes (particularly the pre-iDVD 6 ones) are consistent in keeping to 16:9 throughout the process.
    The widescreen preview works just fine when you check your finished project within iDVD. The problem only happens when you either burn a project or save it to an image.
    A bug in iDVD 6, particularly when working with PAL, and which has been reported to Apple, is that the sub-menus in many of the themes (the chapter settings) default to 4:3 aspect, NTSC and mpeg 1, instead of the desired 16:9 in mpeg 2 in PAL. This may be partly a leftover from iDVD 5 or even a newer ‘feature’ of iDVD 6. Either way, it is annoying when it happens, and we must hope Apple cure it in iDVD 7. In the meantime here is my failsafe workaround, which sounds a lot more complicated when reading about it, that it is in practise.
    Living in the UK, I use PAL (25 fps). Wherever you see a reference to PAL (25 fps) in the following you may substitute NTSC (30 fps) in the various settings mentioned (if you don’t live in Europe), the basic idea is the same. I still use this method, and take these steps, regardless of whether it is always necessary. Worst case scenario: it would have worked anyway. Best case scenario: it works perfectly where it otherwise wouldn’t!
    The object of the exercise is therefore to ‘fix’ all constituent parts of the project (video, titles, theme, effects, even audio!) in the desired 16:9 aspect to avoid producing a DVD where the movie is in 16:9 and the menu is in 4:3 or where other irritating surprises lurk in your project, which you only discover after burning a coaster!
    First go to http://www.mydvdedit.com/index.php?lang=english and download myDVDedit. This is shareware although the download is free. Send the guy a few dollars/euros, he deserves it. While you are there, read all about it. Now install it in your Applications Folder. You will need it later.
    You have finished your iMovie project with music, transitions and so on, and saved it to you Movies Folder. Before you started the project you naturally set it to DV Widescreen.
    Open iDVD. Give the project a name, and save it as Widescreen if it didn’t default to the same aspect as your iMovie project. Now import the iMovie project into iDVD, choose a theme (any theme you like, even if it prefers to stay at 4:3) and save the project. Do what you would normally do to the theme and its drop zones. Save the project.
    Now save as Disk Image on your desktop. Leave it there for the moment when it has finished/appeared.
    Open your Movies Folder. Create a new folder. Name it PROJECTNAME – TS FILES (where ‘projectname’ is the name of your project!). Close the folder. You can of course call it anything you like, but this aids identification.
    Now double-click the disk image on your desktop. It contains two folders: AUDIO_TS (which is empty, but please pretend that it isn’t) and VIDEO_TS. Drag and drop these to the folder you created in your Movies Folder. (This takes a moment).
    Click on the AUDIO_TS folder and go to Get Info in the file menu. Right down the bottom is where you have to change the permissions. Under ‘Ownership & Permissions’ change this from Read Only to Read & Write. Click the small triangle next to Details, scroll down and click on ‘Apply to enclosed items’. You will be asked for your root password. Close the get info window, and now click on the VIDEO_TS folder and do the same. Close the Projectname-TS Files folder. You have now allowed yourself to change the properties of the contents of those folders, which leads us to the next all-important step.
    Open myDVDedit. Go to File and open the projectname TS Files folder. By all means stare at it shock and awe, but don’t bother finding out what it can do, except for the following:
    Top left you fill see a list of files. Lower centre you have a large window. On the vertical menu to the left of that, click te middle one (VTS or VMG).
    In the window at the top left, ignore ‘First Play’ (if there was anything to correct in that, myDVDedit will have done so and told you).
    Click on VMG Menu en (English). Now the whole thing springs to life.
    Set Coding Mode to MPEG-2 (if it isn’t already)
    Set Standard to PAL (or NTSC if that is what you want)
    Set Aspect to 16:9 (not any of the other options)
    Now save the file.
    Click on VTS Menu 1 en (English) and repeat as above.
    Click on VTS Menu 2 and repeat as above.
    You have now permanently ‘fixed’ the entire contents of the TS folder (the disk image) in 16:9 aspect. Close myDVDedit – you won’t need it again until the next project!
    If you have Toast 7 Titanium, open it. ‘Select DVD-Video from VIDEO_TS’. Choose Select from the main Toast window and select your projectname-TS Files folder. You are now ready to burn! You can set the burn speed (2x recommended) before the burn commences. Allow Toast to verify the burn before you eject the DVD-R disk.
    If you don’t have Toast 7, then I assume you can burn the projectname-TS Files folder (disk image) via Disk Utility. I say ‘assume’ only because I have never tried it that way.
    Either way, you now have a DVD which will play as 16:9 widescreen on any TV set, even the old ones where you can’t ask it to letter-box.

  • Ok Experts-why is the wav getting smaller? it didnt in 1.5

    ok experts-quick questions
    in adobe audition 1.5 in multitrack one i would add an instrumental of a beat
    on multitrack two i would record my vocals
    when i saved these together the song wave would look like it should-with it slightly bigger than the orginal instrumental on multitrack one
    because it now had that plus the vocals added to it
    well now on audition 3 - when i save the vocal with the instrumental-the final wav becomes much much much smaller than the original
    multitrack one instrumental.
    Does anyone know why this is?

    >...just curious much like the time I was hitting that hornets nest to see what was inside...
    Okay, to perhaps satisfy a bit more of your curiosity, here's the panning hornet's nest (modified from my original version, which I finally discovered, and with a bit more information):
    So what happens if you pan mono signals to the centre of the stereo sound field? Let's just consider loudspeakers, as this is the most common requirement to get right.
    To get a result that sounds as loud in the centre as it does at the edges, in terms of electrical adding of signals, you need to have each side of the stereo signal outputting half of the voltage - and this would imply that the pan pot should drop the level of each signal 6dB, and not 3dB at all, like the only option we have in Audition. But, in a normal room, with a reasonable degree of reverberation, it's the  acoustical power of the summing signal in the centre we have to consider, and it's this implies that a 3dB drop is what's required - and this is pretty much the only reason that we have it set as it is. But it's more complicated than that; with loudspeakers you get mutual coupling below about 100Hz - and this augments the power coupling by about 3dB... which I'll return to shortly.
    And there's more. If you record a voice talking, and pan it across the sound stage in stereo with a -3dB drop in the centre, you will get a voice that moves across the field at the same perceived level all the way. But if you reduce the result to a mono signal, you will get a 3dB rise in the signal level as the speaker passes the centre (only now it's in mono, so you can't tell) - and that isn't right at all. This means that in practice, any mono listener to a radio play recorded in stereo is going to get level differences that were not intended.
    I don't think that anybody ever does what I'm going to mention next, but if you did, you'd realise the other problem here, and that would be the effect on a bass guitar if you panned it. With this, you get more LF when it passes through the centre position, because of the mutual coupling effect below 100Hz, so that's not good either (but you are going to get a degree of this, whatever you do, in fairness). So now, the pan pot has altered the EQ as well! 
    And it's all of these considerations that tend to cause manufacturers to compromise on 4.5dB as a centre-drop - because at the worst, over most of the frequency range, you are only going to get a 1.5dB error. But this is arbitrary; to a degree, the amount of effect you get from this is room and speaker dependant, and it also varies with the distance apart of the speakers. And it's different again with headphones, just to make it even  more confusing!
    I should mention, before anybody points out that in an anechoic space, the acoustic sum on the centre plane of the speakers is the same as the electrical sum, that I'm aware of that - and just how many people do you know who monitor under these conditions? Virtually all normal spaces will acoustically couple the bass end, but most significantly, the aforementioned condition only really holds true for anybody positioned absolutely centrally between the speakers.
    So I'd say, one way or another, that there are good grounds for having rather more options available for the panpots than we have at present. And yes, this really is a can of worms.

  • Why am I not getting full clip imported into Mocha from AE CC?

    First time attempting to try out Mocha. Using Adobe CC
    I've been following tutorials on bringing a clip from AE CC into MOCHA:
    Select the clip and go to 'Animation':
    Then 'Track with Mocha'.
    Mocha then opens and has an import menu.
    PROBLEM: In the import menu, it appears that all the tutorials are showing that a person can select the keyframes they wish to import (ex. 0 through 465 is automatically there in the tutorials). My import menu shows 0 through 0 and WILL NOT let me change them..It's like it's locked out. If I choose to bring in the clip anyway, it appears to only have brought in one keyframe and is not possible to scan through the timeline...because there is nothing to scan through.
    Perhaps I haven't registered it or something. Same problem on a co-workers CC account-they also just trying it for the first time. Thanks for the help.

    Thanks gents for your responses!  After getting a response from Mocha as well, it appears that I needed to have it as an 'image sequence' like you said Rick. Mocha claims that if your Quicktime player will read the media/clip that Mocha will as well (as long as you have the correct/updated codecs) That's not been the case for me...and I'm pretty sure I'm up to date. A quick google search of 'importing image sequences to After Effects' and then sending to Mocha again. And I'm good. I exported as TIFF. Mocha reads the timeline fine, with a little bit of blur...but I'm trying the CC version out before I upgrade to Mocha Pro. Thanks again and hope this helps someone else in the future.

Maybe you are looking for

  • How to configure QOS on certain IP in the Cisco ASA 5510

    Hi, I am need to configure QOS on certain IP in the Cisco ASA 5510. Assume the IP's are 10.0.1.5 , 10.0.1.6 , 10.0.1.7. Here i have to configure 512 KBPS for 10.0.1.5 and 2 MBPS for 10.0.1.6 and 10.0.1.7 Can this done on a ASA 5510 series? if yes can

  • Upgrade 4S to 5 or buy New?

    Will I be able to upgrade my 4S to 5 when IOS 6 is released this fall or should I wait for the new iPhone 5 when released?

  • How do i get iphone 4 out of recovery mode

    thought my iphone needed charging when plugged it it displayed apple logo then after a few mins it said connect to itunes i did this itunes detected iphone in recovery mode and that i needed to restore i have tried this several times and everytime it

  • Transacction types not displaying in the popup

    Hi Experts, After system upgrade from crm 7.0 to ehp3, transaction types are not displaying upon clicking New button and create follow up buttons. I have checked the spro settings and compared with 7.0 system. There are no changes. In the debugging i

  • OS X 10.5.8 to Lion Upgrade - ?Functionality Loss

    If I upgrade my iMac operating system from OS X 10.5.8 to Lion, how can I predict what functionality I will lose with programs that are running fine on OS X 10.5.8?