Why no response to my questions creat

I uninstall then re-install my drivers and software,also I place the card onto a different pci slot .Still when I do a dxiag sound test they say my card don't support software buffering !what gives?.Also i dont get my 5. sourround sound work like it shoud when I do the channel test I dont get the back indvidual sound from those speakers i did check my sound countrol from the control panel to make sure of no conflict..Befor I go my games do not detect my eax . I have the (creative Labs sound blaster adudige se 24 bit )sound card

OK thanks...I've let the mods know that they can delete that other duplicated thread.
CellPhoneClient wrote:
1) Can I have more than one alarm set on the BB or is there only 1-alarm setting?
Please expand on this. Do you mean a clock alarm? Or notification of new items received? Exactly what type of "alarm" are you asking about?
CellPhoneClient wrote:
2) I have many texts in my Bold 9700. The threads of texts from one person, I would like to save (file it). Otherwise, doesn't it automatically get deleted?  I want to save the threads, how do I SAVE it to where I can go and find it in "view saved messages."
Maybe this KB would be helpful. Or this one. I suppose you could also take a backup and then use a 3rd party IPD reader to extract just the SMS messages you are concerned about. I don't think that there is any built-in method to do exactly as you desire...SMS are designed as transient messages rather than audit-trail requiring messages.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Why doesn't Acrobat XI, pdf created in Corel Vetnura 10, print to my Epson Gluntz & Jensen ictp Plat

    Why doesn't Acrobat XI, pdf created in Corel Vetnura 10, print to my Epson Gluntz & Jensen ictp Platemaker?

    We aren't in a position to provide any reasonable response to this type of open-ended question without significantly more information.
    Exactly what symptoms are you seeing? Are you getting a failure message from Acrobat? If so, what? Are you getting a PostScript error at the printer? For that matter, is it PostScript printer of some type? If part of the job prints, what doesn't print?
    More information and maybe be can assist you!!
              - Dov

  • I have a problem: every time when i want to download free apple applications in the apple store, apple store asks me which type of credit card i want to use. Why did it ask this question?

    i have a problem: every time when i want to download free apple applications in the apple store, apple store asks me which type of credit card i want to use. Why did it ask this question?

    If you are within 14 days of purchase you can still return the iPhone and get the phone that suits your needs, however, I think you will find that no matter which phone you get the content provider will want to know how you are going to pay for future purchases. For Android phones it is Google, and they will certainly want to know.
    To create an Apple account without a credit card see: http://support.apple.com/kb/HT2534

  • Why do I have a question mark on top of Ichat Icon

    why do I have a question mark on top of Ichat Icon ?

    Hi,
    If this is in the DOCK it because that icon (and the links it has) have lost contact with the original app.
    Open th Applications folder.
    Drag iChat to the DOCK (Creates the icon and links)
    If his displays properly drag the old one Off the DOCK and let go (Puff of smoke animation)
    IF it is in the Applications folder that you see this then iChat is most probably broken in some way and you will have to reinstall it  (I will needs to know which version for a more complete answer on that)
    9:52 PM      Wednesday; September 7, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Why need message type when u create data type...

    why need message type when u create data type...

    Hi,
    A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
    ·        More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
    ·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
    For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
    A message type does not define the direction of the message exchange, in other words, whether it is a request or a response. In exceptional cases you can use the same message type for both the request and the response message.
    A message type has the following characteristics:
    ·        It comprises exactly one data type, which determines the content of the message to be transferred.
    ·        It is identified by a name and an XML namespace. The name (together with the namespace) of a message type is located in the uppermost tag of the message to be exchanged. This is an element tag.
    You have defined a message type GreetingRes that references a simple data type of type xsd:string. The XML namespace of the message type is http://sap.com/xi/myExample. The corresponding payload might look like this:
    <?xml version="1.0" encoding="utf-8" ?>
    <ns1:GreetingRes xmlns:ns1="http://sap.com/xi/myExample"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
       Hello Mrs. Miller
    </ns1:GreetingRes>
    You can specify how a message type is used in more detail in the description
    hope this will help you.
    regards
    Aashish Sinha
    PS : reward points if helpful

  • Why is a new user account created every time I upload files from my old PC. Can't you just use the same user account all the time?

    I'm a new Mac user and am finding my way slowly around it. One question: why is a new user account created every time I upload files from my old PC?

    Because you're using the Migration Assistant, and it can't migrate data to an existing user account. Transfer everything at once or use a different method.
    (111200)

  • Why sender agreement need not to create for IDOC

    Hi Experts,
    why sender agreement need not to create for idoc

    Please check these related discussions:
    Re: Question on sender agreement
    Re: IDOC and HTTP Adapters - sender agreement ??
    Re: ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?
    Many threads with the same Q are answered on SDN....so if you search you can find the correct answer that you need!
    Regards,
    Abhishek.

  • NTLM Authentication : why is it not possible to create more than one NTLM realm ?

    Hello,
    I'm wondering why it is not possible to create more than one NTLM realm on a wsa.
    Can you explain exactly what is the blocking point ?
    Thanks in advance
    Regards

    Well, at this point (pre 7.5), there isn't an agent, the WSA is joined to the domain, just like a Windows box, it authenticates via that trust relationship.  From that point it is all based on how NT/Active Directory domains work.   As long as there is a trust between the domains, you can can auth users from as many domains as you like.
    There is an agent in the works.  The ADAgent will be released with 7.5.  The code is already available, it was released with the ASA ver 8.4, and it will be used to pass authentication info to the WSA.  At this point, current versions still require trust relationships between all of the domains touched.
    Taken from the setup guide: http://www.cisco.com/en/US/docs/security/ibf/setup_guide/ibf10_install.html#wp1054011
    Before you configure even a single domain controller machine using the
    adacfg dc create
    command, ensure that the AD Agent machine is first joined to a domain (for example, domain
    J
    ) that has a trust relationship with each and every domain (for example, domain
    D[i]
    ) that it will monitor for user authentications (through the domain controller machines that you will be configuring on the AD Agent machine).
    Depending on your Active Directory domain structure, the following scenarios are possible:
    1. Single Forest, Single Domain—There is only one domain, D[i] for all domain controller machines, which is one and the same as domain J. The AD Agent machine must first be joined to this single domain, and since no other domains are involved, there is no need to configure any trust relationship with any other domain.
    2. Single Forest, Multiple Domains—All the domains in a single forest already have an inherent two-way trust relationship with each other. Thus, the AD Agent must first be joined to one of the domains, J, in this forest, with this domain J not necessarily being identical to any of the domains D[i] corresponding to the domain controller machines. Because of the inherent trust relationship between domain J and each of the domains D[i], there is no need to explicitly configure any trust relationships.
    3. Multiple Forests, Multiple Domains—It is possible that domain J might belong to a forest that is different than the forest to which one or more of the domains D[i] corresponding to the domain controller machines belong. In this case, you must explicitly ensure that each of the domains D[i] has an effective trust relationship with domain J, in at least one of the following two ways:
    a. A two-way external trust relationship can be established between the two domains, D[i] and J
    b. A two-way forest trust relationship can be established between the the forest corresponding to domain D[i] and the forest corresponding to domain J

  • Why do i have a question mark instead of the app picture. It wont let me use the app either.

    Why do i have a question mark instead of the app picture. It wont let me use the app either.

    Where is your Calculator application located? Before you can put it into the Dock you need to remove the Question Mark. Select it with the mouse and drag it out of the until it "poofs" away. Now locate Calculator and drag its icon into the Dock.

  • Why do i have a question mark on my app store

    why  do I have A question mark on my app store?

    To delete that question mark, just hold the Command key and drag it off the Finder, so that question mark will be removed. That's caused when the item you had there is deleted, so Finder doesn't find it and it shows the question mark

  • CMP Beans from Tables: Why does the Container try to create new tables?

    I'm trying to develop an EJB application using JDeveloper on 9iAS. I have several CMPs and have my tables that I want my CMPs to be based on already defined in my DB schema. I want to use CMP but I don't want the Container to create the tables, rather I want the Container to map my CMP EJBs to the already existing tables.
    The issue is:
    While creating these CMP EJBs in JDeveloper I chose the "New Enterprise Java Bean" EJB creation wizard using the option labeled "Container-managed Entity Beans from Tables". My assumption is that this does what I want, because the wizard prompts for a schema and table you want to map to. Then it creates the attributes & getter/setter methods, PK class, etc. all based on the table defintion automatically. Great. So why when I try to run my application do I get error messages for each EJB such as:
    Auto-creating table: create table STREET_TYPE (PK_STYP_ID NUMBER(8), STREET_TYPE VARCHAR2(20), primary key (PK_STYP_ID, STREET_TYPE))
    Warning: Error creating table: ORA-00955: name is already used by an existing object
    Huh?? I thought the idea is that the CMP EJB is mapped to the existing table in my schema. Why is the Container trying to create new tables?? Is this possible? Or am I missing something fundamental about how Containers create and manage CMPs? Or is this just a JDevelop container issue? TIA

    I presume you are getting the problem on application
    deploy? This happens when upon initialization of the application using the built-in OC4J container/app server that is part of JDeveloper. Here is the full messaging:
    [Starting OC4J using the following ports: HTTP=8989, RMI=23892, JMS=9228.]
    C:\OraHome1\jdk\bin\javaw.exe -ojvm -classpath C:\OraHome1\j2ee\home\oc4j.jar com.evermind.server.OC4JServer -config C:\OraHome1\jdev\system\oc4j-config\server.xml
    [waiting for the server to complete its initialization...]
    Copying default deployment descriptor from archive at Q:\CBTCOF\COF_APPLICATION\COF_Project\classes/META-INF/orion-ejb-jar.xml to deployment directory C:\OraHome1\jdev\system\oc4j-config\application-deployments\current-workspace-app\classes...
    Auto-deploying file:/Q:/CBTCOF/COF_APPLICATION/COF_Project/classes/ (No previous deployment found)...
    Auto-creating table: create table STREET_TYPE (PK_STYP_ID NUMBER(8), STREET_TYPE VARCHAR2(20), primary key (PK_STYP_ID, STREET_TYPE))
    Warning: Error creating table: ORA-00955: name is already used by an existing object
    [...OTHER SIMILAR ERROR MESSAGES]
    done.
    Oracle9iAS (9.0.2.0.0) Containers for J2EE initialized
    If so, in the application.xml file of you
    OC4J instance the is a setting autocreate-tables,
    which by default is true!
    Set it to false as below and that should clear up
    your problem.
    <orion-application autocreate-tables="false"
    default-data-Hmm. I found at least a dozen or so files with that name and set everyone that had this attriute to "false", restarted the OC4J server and still got these errors.

  • Why can't iMovie on iOS create portrait movies?

    If I take a video on my iPhone in portrait mode and then import it into iMovie for editing, iMovie always crops it.
    Why can't iMovie on iOS create portrait videos?
    Splice can create portrait videos!!!
    Martin

    I don't know why, as we are all users here no one will really know why.
    I assume it's because TVs only play wide video.
    But if you really want to see it in future I suggest you tell Apple:
    http://www.apple.com/feedback/imovie_ios.html
    If enough peoploe ask they will change it.

  • Why am I seeing a question mark sign when I click on safari to use the internet?

    why do I see a question mark sign after I click on safari to try to use the internet?

    If you mean in Dock then you have moved the Safari application or the application is missing as in deleted.

  • I can not log in to the account from the iTunes Store's why I lost my security question! I want to modify the security question again I can not

    I can not log in to the account from the iTunes Store's why I lost my security question! I want to modify the security question again I can not

    BLANK Cloud Screen http://forums.adobe.com/message/5484303
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • My safari screen is greyed out, I checked and found a response to this question.  I went to settings and cleared history, cookies, and cache, java script is on and I restarted, screen is still grey, cant touch it to do a thing.  Help!

    my safari screen is greyed out, I checked and found a response to this question.  I went to settings and cleared history, cookies, and cache, java script is on and I restarted, screen is still grey, cant touch it to do a thing.  Help!

    That is usually the fix but try this now.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears - ignore the red slider - let go of the buttons. See if that helps.
    You can also try this - quit Safari. From the home screen - Double tap the home button and your recent apps appear the bottom. Tap and hold down on the Safari icon until it wiggles. Tap the minus sign in the upper left corner to close the app. Tap the home button twice. Restart the iPad.
    Message was edited by: Demo

Maybe you are looking for