Why no sound out of front headset port of MSI 975 MOBO?

A friend of mine has an MSI 975x motherboard and hooked up his cases molded front audio connector to the MOBO on JAUD1.
There is only one way to connect the connector since one pin hold is filled in (no hole there).
While he gets sound out of the speakers connected to back of case, he gets no sounds via the headphone connection on front of case. Ideas???
Thanks,
Peter

Thanks George,
It was unticked.
The way I got the headphone to work b4 your reply was to click on the rear panel headphone jack and there was a pop-up that allowed me to click on headphones.
If I tried to click on the Front Panel area within Audio I/O and clicked on headphone or anything down there-nothing happened.
I did get sound out of headphone via front panel now. And then I just shut off my speakers connected to the rear panel and I am okay.
Guess that is the best I can do unless I am missing something.
All I have is a standard 2 speaker system with a bass speaker on floor.
Thanks, Peter

Similar Messages

Sound Out from Mini Display Port Not Working on a Particular TV

I have a Macbook Pro that I purchased new a few months ago. I use an adaptor to run the display out of the Mini Display port to an HDMI cable on my TV, sound and all. I have also used it while traveling to do the same thing on hotel TVs with HDMI ports.
When I do this, I have to go into System Prefs>Sound and specify the sound output should go to the model of TV that is displayed in the prefs. It always seemed to detect the model of TV when I have it hooked up.
I am staying in a house where I can't get the sound to go out of a Toshiba TV. It shows up in the sound prefs, but I can't ear a thing. The only way I can hear sound is if I tell it to use the internal speakers.
What am I doing wrong when it comes to the Toshiba?
Thanks.

Greetings,
But I wanna know what is the best way going ahead to get this fixed.
Thats up to you. Given the testing you have performed the only additional items I would suggest would be:
Reset the SMC and then test: http://support.apple.com/kb/HT3964
Reset the PRAM and then test: http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
You can make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.
Calling AppleCare and having them send you a box for the computer would be the fastest method of repair (usually) as an AppleStore or an Apple Authorized Service provider may not have the parts in stock. You could certainly take the computer in to have them look at it and tell you what the repair time frame would be.
Also, if they decide to replace the part, will I be shelling out any money inspite of the coverage ?
If you would like to read the warranty of the Macbook Pro, Hardware warranty details are found here: http://www.apple.com/legal/warranty/
The warranty covers manufacturing issues. As long as the failure is due to a hardware component failure and not outside influence then there is no out of pocket expense.
If the port has failed because a 1 year old shoved a nail in it, rain blew in the window and shorted out the logic board, SUV backed up over the computer and broke the port, then the warranty will not cover it. They will contact you and let you know that the repair is not covered and ask if you want it repaired at your own cost or you can pick up / have the computer sent back to you.
If for some reason you find out the issue is not covered then you could take it up with your insurnace company (renters / home owners etc) or your credit card company if you purchased the computer with a credit card. Some credit cards offer hardware coverage for purchases.
Best of luck.

Why is sound out of sync when I burn a DVD?

I finished a movie in iMovie 4 as I always have and opened iDVD from iMovie. After creating the opening title and burning the disk, I discovered that the sound was slightly out of sync with the image. It was fine in iMovie. Any ideas what went wrong?
Richard

Welcome to the forums.
There can be sync problems if the original video was
captured in Long Play mode or the camcorder's audio
quality is on the lower setting. You can search the
forum for other solutions, but one option to try is
Extracting the audio in iMovie. This will make a
copy of the original audio and put it on one of your
audio tracks (and mute the original audio). The
copied audio often will behave better.
John
Thank you, John-
Your suggestion about extracting all the audio worked. My latest DVD burn was in snyc.
I am still confused as to why such a workaround is even neccessary. I have never had this problem of out of sync audio with any other projects. Why it suddenly happened is a mystery to me. I'm very happy your suggestion worked but it is rather labor intensive if it has to be done on every project from now on.
Any ideas out there?
Thanks again.
Richard

No sound out off my speak

just installed my new Sound Blaster X-FI card on my computer. And i have put the right cables in it. And now i dont get any sound of my Trust 4500P 5. speaker set and i also dont get any sound out off my Headset.plz help to solve this problem

I had the same problem..all of the sudden my analog outputs didnt work, i un checked digi i/o and checked it and unchecked it, only the digi i/o jack worked lucky for me my speakers take both analog and digital. i found if you go into the THX setup and mess around in there, the analog ports will?work again.

When headset is inserted, why does sound continue to come from the speaker?

When headset is inserted, why does sound continue to come from the speaker?

Sure your inserting the headset into the Headphone Out port and not the In port..?
Also what headset....?
Most PC based headset with built in mic's will not work without using a device like the Griffin iMic.

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

No sound out of my MAC PRO Optical Digital audio port

I own a Mac Pro early 2007, running MAC OS X Ver 10.6.7
I also have a set of Logitech Speakers Z5500 connected to the Optical digital port
No problem ever until now
Suddenly I am not getting any sound out my Mac Pro.
The speaker are testing fine, the volume is set correctly and in the system preferences, in the Sound function the device is selected for Digital Out.
I am at my rope's end.
Any help will be appreciated
Thanks
Carlos

sircolio:
I took my apple to teh Apple Store and one of the geniuses analyzed to be a hardware problem.
It will cost me $500.00 to have fixed. Thanks but not thanks

Back panel sound out port is not working COMPAQ SR5060IL

Hi
I have Compaq SR 5060IL PC
Recently i upgraded to windows 7 ultimate from xp
But one problem is that only the sound-out port of the back panel is not working where as mic-in and sound-in port of rear panel are working perfectly..
Before upgrading means in windows xp all ports are working,,,,
pls help

Hi:
You may need to download and install the latest audio driver from Realtek:
Accept the agreement, download and install the first driver on the list and see if that fixes your issue.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Can I use my headset for "sound-out" and phone mic...

I have an E51 and the headset that came with it. I would like to achieve the following during calls: To use the headset for sound-out (i.e. as headphones) and the phone mic for sound-in. The mic on the headset gives a lot of static and I would rather use the phone mic (girlfriend complains).
So I tried this: Under Tools>Settings>General>Enhancement, I set the Default to Headphones.
Still, when I connect my headset it says "Default Enhancement: Headset" and the headset mic is automatically used.
The default enhancement settings does not seem to matter.
Does anyone know if there is a way to solve this? Is there a way to manually switch between the headset and phone mics?
Thanks!

Thanks for the reply. I am not using a bluetooth headset but a cabled one (that one that came with the phone for me -- I guess nokia skimped a bit here, not shipping with a bt headset).
I was recently told basically the same thing you are saying in a store, that it is not possible to use the mic for sound-in during a headset call. He also said that any cabled headset or even *headphones* will be recognized as a headset by nokia phones because they all have the same 3 connectors (right, left, mic) on the 2.5mm jack. Can that really be right?
So that means that even if I get a set of cabled headphones for my e51, I will not be able to use them for sound-out during a call?
cheers

Why is the picture and sound out of sync when i download my videos from iphone 4s

Why is my picture and sound out of sync in my videos when I download them from my Iphone 4s?

please share your advice. maybe no-one else replied because they didn't have an answer? by solving the problem yourself, and then sharing that information, you can help many other users overcome the same problem. welcome to the helpers club!

Why MSI gt70 or gt72 dont have digital sound out?

why? If I dont use HDMI I am left only with line out, which is analog signal. SOmetimes HDMI has too much lag for a specific game so I need to use optical sound out without HDMI
any idea?

To go with the optical cable like that you also need a Toslink female adapter. You should have ordered a a cable like this instead:
http://www.amazon.de/KabelDirekt-Optisches-TOSLINK-Digital-Stecker/dp/B00KNQR4UK/ref=sr_1_31?s=ce-accessories&ie=UTF8&qid=1426490799&sr=1-31
http://www.amazon.de/Adapter-Toslink-Buchse-optischer-Stecker-schwarz/dp/B000LB65XO/ref=pd_sim_ce_acc_3?ie=UTF8&refRID=124SKWSAMV7KWHVCQF28
Plug it into the headphone out/SPDIF-out jack on the computer and plug the optical cable into it.

Why does sound only come out of 1 speaker when I dock my iPod?

My son's Ipod only plays sound out of I speaker. When I dock the ipod on his ihome radio or my sony radio, sound only comes out of the left speaker. When I put other ipods on the same docks i get sound out of both speakers. It is just this one ipod that won't produce sound out of both speakers, no matter what docking station I use.

Likely it is a hardware issue for the iPod, you need to bring it for service

Changing the output sound device when a headset is plugged in?

I wanted to replace my clunky old Logitech USB headset with a bluetooth one and then noticed - hey! - there is a headset jack. So I tested a Skype call with an extra iPhone headset I had lying around and it worked great.
The only problem is there doesn't seem to be a way to switch to the internal speaker of the MBP when not using the headset, which is most of the time, unless I physically unplug the headset. The Option+click volume feature also won't recognize the internal speakers unless I unplug the headset.
It's a minor nuisance, but there is the extra wear and tear. And it's sort of a nuisance to have to quickly plug the headset in if a call comes in. So I was wondering if there was some recommended tool for doing this kind of quick switching when the headset is plugged in all the time.
Thanks,
Doug

The only thing I don't like about the iPhone headset solution is that the earplugs are uncomfortable, and keep falling out. I basically don't like things stuck in my ear. So I am thinking of buying an actual over-the-ears headset to plug in to the headset port.
A couple of questions:
- Is there any reason at all to go USB headset instead? It seems like a waste of a USB port since there is a headset jack.
- Is there any way of switching the output sound back to the speakers while the headset is plugged in? Or do I have to physically unplug it each time it is not in use for a Skype call (which is the only time I would use it)?
Thanks,
doug

[Front FireWire Port] Audigy 2 SB1394 correct pinout nee

Hello all,
I have a Creative SoundBlaster Audigy 2 card (not ZS, not Platinum, just the original Audigy 2) with the IEEE394 internal port (SB394). There are 9 pins on it ( row of 5 and of 4) and I'm pretty sure I can connect the front FireWire port of my Antec SX040BII case to it. The Antec SX040BII FireWire cable consists of 6 individual connectors :
VP = PowerVG = GroundTPA+ = Twisted Pair A Channel Positi'veTPA- = Twisted Pair A Channel Negati'veTPB+ = Twisted Pair B Channel Positi'veTPB- = Twisted Pair B Channel Negati've
Creative told me it was not possible and not intended for that purpose and suggested me to buy an expensi've Audigy front panel... Yeah right.
I know many users reported to have it hooked up successfully. But I've found so many different and contradictory layouts for that card in these forums and others that I don't know what to do now. Users with an Audigy 2 and an Antec case (preferrably the SX040BII) or Creative techs,could you please indicate me the EXACT pinout so I can hookup this front FireWire port to it ?
As follow :
Audigy 2 internal SB394
[ 2 3 4 5]
[6 7 8 9 ]
Thanks
kpone

I ran across this in the knowledge database looking for the audigy 2 zs pin layout. hope it hel
ps.
AUD_EXT
This is for the Sound Blaster Li've and Sound Blaster Audigy Series Only. Not the Sound Blaster Audigy 2 Series.
Pin-Outs
Pin Name Description
VCC +5V power supply
2 VCC +5V power supply
3 GND Ground
4 AC97CLK 24.5 MHz clock output
5 GND Ground
6 GP_SPDIFIN#2 SPDIF input signal
7 GND Ground
8 GND Ground
9 SPDIFO#3 SPDIF out Signal
0 GPO General Purpose Output #
GPO2 General Purpose Output #2
2 GND Ground
3 GPO0 General Purpose Output #0
4 GND Ground
5 GP_ SPDIFIN SPDIF Input signal
6 GND Ground
7 GPDIFO#0 SPDIF Out signal
8 GND Ground
9 SPDIFO# SPDIF Out signal
20 GND Ground
2 GND Ground
22 SPDIFO SPDIF Out signal
23 GPI0 Digital Input (GP Input 0; Reserved)
24 GPI Digital Input (GP Input ; Reserved)
25 OUTMIDI MIDI Output
26 GND Ground
27 INMIDI MIDI Input
28 GND Ground
29 KEY no pin
30 KEY no pin
3 ADCSDO2 I2S audio data input
32 GND Ground
33 ADCSDO I2S audio data input.
34 GND Ground
35 ADCSDO0 I2S audio data input
36 GND Ground
37 I2SCLK I2S serial bit clock
38 GND Ground
39 I2SFS Frame sync.
40 GND Ground
man the pin picture didnt import, so here is the link: http://dmzweb4.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=354,E=000000000006634953,K=8743,Sxi=2,Case=obj (3026),Kb=ww_english,VARSET=ws:http://us.creative.com/
it is the "Internal connectors such as TAD, CD SPDIF, AUX etc" selection, and then you can see the pin layout. My guess is that it is the small group of pins on the left that you are looking for.

Why no sound out of front headset port of MSI 975 MOBO?

Similar Messages

Maybe you are looking for