Why nokia 500 will not support widgets after the b...

please reply....why nokia 500 willnot support widgets after the belle update...i buy this phone for belle and all its specs...
Solved!
Go to Solution.

Having read the FAQ on the Nokia Homepage (I'm assuming this is what you meant...) this is what is mentioned.
"Nokia Belle is specifically tailored to each phone model, including the Nokia 500. Due to technical specifications, Nokia Belle for Nokia 500 differs to other Nokia Belle phones in the following aspects:
Nokia 500 with Nokia Belle only supports 4 homescreens.
Nokia 500 does not support NFC.
FM transmitter and widget are not supported in Nokia 500.
Nokia 500 includes Nokia Maps 3.06 instead of 3.08.
Additionally, Nokia 500 will get Angry Birds with the Nokia Belle update"
Basically, due to technical limitations, you will get
1) 4 homescreens
2) There is no NFC or FM transmitter therefore you do not get THOSE widgets.
You SHOULD get all the other widgets (the only reason you will not get the FM and NFC widgets is because you don't have that hardware. That's how I read it anyway.
Hope this helps.

Similar Messages

IPod Touch (4th gen) will not sync music after the latest iTunes update

I'm using iTunes on a PC with Windows 7 and after the latest update (iTunes 11.2.2), it will not sync with my iPod touch 4 (also updated to the latest possible version - iOS 6.1.6).
Before the update there was no problem with the sync. And this iPod has always been synced only with this computer, and this iTunes library.
After the iTunes update, several songs on my iPod were greyed out and unplayable (the library plays fine in iTunes).
Now, when I try to sync, iTunes goes through all the steps, saying it finished syncing, without any error message but there is no actual change on the iPod.
I've tried deleting all the music on the iPod, to resync the entire music library anew.
Again, iTunes went through all the steps, finished "syncing" and nothing - and, of course, all the music on my iPod is now missing.
When I check the "On this iPod" option in iTunes, the entire song list shows up there but appears greyed out and unplayable.
On the actual iPod device, there is absolutely nothing in the Music app - no songs, no playlists.
The iPod always shows "no data" in the Music app.
Sometimes iTunes shows that I have 18GB of music on the device, sometimes it shows 0GB ...at one point it showed "no space available". But it has plenty of space - 23.5 GB of available space out of 32GB.
To fix this I've tried the following:
- automatic sync, manual sync, manually adding/deleting songs on the iPod, autofilling and replacing songs;
- resetting my iPod by holding the (on/off and home buttons) and resetting through the "reset all settings" option on my iPod;
- reset and restore from backup;
- uninstalled and re-installed iTunes on my PC.
- I've run the diagnostics tool in iTunes - all tests passed;
...plus various other suggested solutions I have found in the similar topics around here.
(I've checked and there are no restrictions to the songs, the computer is authorized, etc.)
Absolutely nothing works and it is very frustrating, as I usually only use the iPod for the music.
Please help.
Violet

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off after the 1 minute autolock. How do i fix this?

I have an iPhone 4 and recently updated the software. Since then, the screen will not turn off consistently after the 1 minute auto-lock. How do I fix this?

Settings>General>Auto Lock

After installing 10.6, 10.6.8 my iMac will not log out after the prescribed time. How do I fix this?

My iMac will not automatically log off/out after the prescribed time since I have installed Snow Leopard. It will continue to go to, in order at the prescribed times, Screen Saver, Display Sleep, Computer Sleep. But the next step - Automatically Log User Off after xxx minutes no longer functions. Assistance?

Anyone can help?????

My iPhone 4 will not sync music after the update, please help....

After updating the new ios my iPhone will not sync any music. My iPad is syncs fine its just my iPhone 4.

This is almost embarassing. For some totally unexplainable reason all the songs in iTunes were unchecked. I was considering syncing the whole iTunes library to my iPnone, tut even with the 32 Gb version it would not hold it all. I restarted my MBP, and the message about the unchecked songs came up. It obviously is not enough to have songs checked for the iPhone. Thanks anyway.

My ipad will not play videos after the last ios 7.0.3 update, help!?!

Will not play Netflix, my videos or other videos (network apps downloaded ABC, CW etc).
I tried to re-install clear my internet history. I also waited until it was full charged.
Not sure what to do, everything else is working perfect.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

IPad will not boot update after the latest update.

AAfter he update the iPad will start, it just wants to connect to iTunes. Is there any way to correct this without iTunes

If the reboot by holding both the power and home buttons until the apple logo appears does not help, there is not much you can do except restore via the recovery mode per the instructions in http://support.apple.com/kb/HT1808

The print carriage will not move even after the paper jam has been cleared

I had a paper jam this morning and cleared it out completely. I keep getting a message on my HP ENVY 4500 that says the print carriage cannot move. Open the ink cartridge access door, clear any paper jam or obstruction, ensure ink cartridge levers are lower and snapped.

Hi Loleatha,
Welcome to the HP Support Forums!
Is there any visible error message on the Screen of your printer?
You can follow the steps in this link to try and troubleshoot the issue.
Hope this helps.
Thanks!
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Regards,
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

ITunes will not open up after the latest iTune update 12.01 on my iMac (late 2009)

The latest iTunes 12.01 refuses to open on my iMac (late 2009) after installing Yosemite, but works OK on my Mac Mini (late 2012) also with Yosemite. help!

Hi there 1302Scotty1944,
You may want to try reinstalling iTunes as an initial troublshooting step. The article below has more information.
Troubleshooting iTunes installation on Mac OS X
-Griff W.

I have updated my iPhone 4S with ios6 but my phone will not switch on after the update

I have today updated my iPhone 4S with Ios6 but I can no longer switch the phone on, I have plugged it in just in case the battery had gone dead but this makes no difference . Is this due to the update

hi i have the problem tried hard reset but no joy

Simply will not open anymore after the update. Running Maverick on a brand new iMac . . .Solutions?

I've uninstalled . . . then went all the way back to iWork 08 . . . which opens just fine. Then downloaded/installed the update. It just won't open.

I've uninstalled . . . then went all the way back to iWork 08 . . . which opens just fine. Then downloaded/installed the update. It just won't open.

My iPad mini will not turn on, after the newest update.

Just received an iPad mini from my mother the iPad was up and running. I put the new update on it Friday night and Saturday evening plugging it in but it still had battery. Went back to look at it and it was black screened plugged in. I unplugged try to turn it on and it won't start up. I tried to reset with holding the off and home button. Didn't work. I tried to reboot with the computer and it does even recognize it. Please help!

Hold the home and power button downs until it restarts. If iTunes doesn't recognize it, get it replaced. http://www.apple.com/retail/geniusbar/

My brand new iMac will not power up after an update restart, any suggestions?

Any suggestions on why my IMac will not power up after it done a restart?

Try an SMC reset and PRAM reset: https://discussions.apple.com/docs/DOC-3603
If that doesn't help:
See if it will start in Safe Boot: restart holding down the Shift key until you see a grey progress bar, type your admin password when prompted, let it continue to (hopefully) boot. Restart as normal from the Apple menu.
If that didn't help, try booting into the Recovery HD: restart holding down Command+r and choose Disk Utility from the four choices when they appear on screen. Once DU has launched select your Macintosh HD on the left and click on 'repair disk'. If anything gets changed click on repair disk again until you get a clear pass, restart as normal from the Apple menu.
If you still have problems, give AppleCare a call.

Imac will not start up after power outage

My iMac G5 will not turn on after the power went out. I can hear a clicking noise which seems to be coming from the fan/power supply area when it is plugged in. Nothing happens when the power button is pressed. Tried resetting PMU and still nothing. What do you think the problem could be? Bad power supply?
Thanks.
iMac G5 17" Mac OS X (10.4.9)

I just went through the steps of troubleshooting with an iMac that won't turn on using the led indicators with the back taken off, the first led light lights but it seems to blink very quickly (in unison with the clicking noise), does not stay solid. After pressing the SMU and then the internal power button, nothing happens again, and the 2nd led light does not light even momentarily. So it tells me that I need a new logic board...what kind of costs are we talking about here, anybody have a ballpark idea? Thanks for the help.
Pat

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

Why nokia 500 will not support widgets after the b...

Similar Messages

Maybe you are looking for