Why not able to see BUS2012 through se24

Hi,
Please clarify me on this.
BUS2012 is a business object for Purchase order.
Then why can't I see this object through se24 (Class Builder) .
Why there are separate transsactions(SWO1, SWO2) to see these objects.
Other classes I can see through se24.
Can't I say BUS2012 is a class having attributes, methods.
Can I assume BUS2012 is similar to Classes in any other languages (like Java).
Thanks,
Panda

Hi,
Please help me in understanding this.
Usual way of programming says , we need to create objects of classes at runtime. Once object is created we play with the methods of the object.
At runtime we can have many instances (Objects) of the same class running.
Then my question is what is BUS2012?
Is it a class or an object?
If it's an object then what's it type. (What type of object)
Thanks for looking into this.
-Panda

Similar Messages

HT1918 why i am not able to see the none option in the payment link?

why i am not able to see the none option in the payment link?

Did you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions.

Why am i not able to see images on some web sites, using safari 5.1.7. I have enabled the tab to display images.

Does anyone know why I am not able to see images on some web sites using safari 5.1.7?
I have enabled the apperance tab to display images.

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Why I am not able to see upgrade to windows 10 app in Aspire V3 572g ?

My system is up to date with all updates in windows 8.1. Why I am not able to see windows 10 upgrade app?

Grab windows 10 from here:https://www.microsoft.com/en-us/software-download/windows10

Why users are not able to see certain printers even though they are in the Airgroup server table

Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.

The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al

Ipod as hard disk - Why am I not able to see the whole file?

I'm using my 80 gig 5th gen ipod as a hard disk for the first time. I've dragged a 32 KB text file to the ipod. When I scroll though the file all is great...but I'm not able to see the whole file? It's like I get one page and that's all. Any ideas to help me?

Do you mean the Notes function? If so, the file size per note is, I believe, 4k. Therefore, you'd need to break up a 32k file into several parts or it will be truncated.

Why i am not able to see calculated Attribute in Context

Hi all,
I am not able to see <b>calculated Attiribute</b> in Context...our NWDS version is 2.0.16..Could anyone tell me the reason...

Hi
if you have not created value attibute?
Create a value attribute by right clicking the context.Right click the newly created value attribute there you can see the calculated attribute property
Regards,
Arun

I am not able to see the valeus in the report on multiprovider.

Hi Gurus,
I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
But I am not able to see the values for 0DOC_CURRCY in the report.
Why I am not able to see the valeus in the report which is executing on the multiprovider.
PLs help me with a solution.

Hi,
First step is to checck the data in the ODS.
Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
If this is checked you 70 % of the job is Over in your creating multiprovider.
For more information
http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
santosh

Apple TV and iTunes not able to see each other

I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

I am not able to see my interface in ID.

Dear All,
At present i am doing File to IDOC scenario.I am using Business Service for my Sender,and i am using EXISTING Business System for my receiver.For my Business Service,i opened the Business Service, i added my interface ,no problem for me.
Coming to Business System i am unable to see my IDOC interface while doing Interface Determination.
For this problem i gone through several forums there i got information that,
We have to install our Software Component in Our Business System in SLD.That part i am not able to do.Can anyone please help me in this issue?
At present in my Business System my software component is not there.Someother's Software Component is there,that's why i am able to see their interfaces,and not able to see mine in ID.
Thanks in Advance.
Regards,
Ramana.

hi venkata,
Check for these in configuration
1) For IDoc Scenarios for an R/3 System, you need to create a Technical System.Check that you hav created or not
2) If you are doing it from scratch create a business system and new product -> software component.
3) Assign this business system to ur Techincal system.
If suppose all the required TS, BS are already present
Then come to BS in ID- Configuration Time,
Click on the business system and select the tab for receiver (Inbound), add the IDoc Interface here, and then you will be able to view the interface
Regards
Ramesh P

Planner not able to see Business rule

Hi There,
The issue here is ,we have attached some business rules to a form on "ON save" and through business rule security ,have given access to a planner user but with Planner login ,the he is not able to see that business rule attched with that form.i have checked with admin login ,it is visible.
Any idea why this is happening?

Have you added validate and launch access to the business rules for that user? If yes try restarting the services.
Also try removing and adding again the user with validate and launch access.
Try checking are you able to view BR under administration-> Business rules from the Planner's id ?

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

BI Publisher: not able to see the xml data after creating a data model

I am learning BI publisher and trying to create a report data model
I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
I am getting unexpected exception, not able to see the XML view .
in the server console i got servlet exception, here is one of the line
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
Edited by: joysaha123 on Mar 17, 2010 6:07 PM

Hi karthik
Thanks for your response
Actually iam a beginner in java coding hence struggling to come up with the things
I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
actually the same program i wrote in java
and the same method i was calling from the main
and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
and the printing takes place
but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
and this creating problem , had it returned XmlDocument
i would have printed the elements one one
but as it is returning deferredimpl
iam unable to print the elements
could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
in servlets but in plain java pogram it is returing XmlDocument
Thanks
Bhanu

Why not able to see BUS2012 through se24

Similar Messages

Maybe you are looking for