Why not allow coordinates (lat

why not allow coordinates (latitude & longitude) when the phone, ipad is located!

Rich P wrote:
Well Steve
this is a user-to-user forum. Steve has better things to do than read your (or other) rants here.
send your suggestions and/or complaints to the right address -> _*iPod Touch Feedback*_.
JGG

Similar Messages

  • Calendar:  Why not allow freedom to set alerts on any date/time?

    Hypothetically speaking...
    A man's wedding anniversary is every July 29th, however his memory has failed to prepare himself for the date appropriately for the last few years.
    He recently added this date to his Iphone Calendar app, however it only allows him to alert the event the maximum of 2 days before. Why not allow the freedom to set alerts weeks in advance? Or perhaps allow alerts to be provided at any date/time you feel necessary?
    I feel this scenario, and many varieties of others would benefit to the availability of this feature within the Calendar app.
    I also have one additional recommendation for the app. If an event is considered an ALL DAY event and an alert is set as a reminder, this alert will go off at midnight since it 'technically' is the beginning of the day. Quite annoying in my opinion. Lets also have the availability to set the alert notification time for ALL DAY events.
    I look forward to Apple recognizing these innovative ideas and providing these additions to their next upgrade! THANKS!
    Message was edited by: Drew Henderson

    I agree completely that this sort of freedom is needed.

  • The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

    The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

    That is not normal behaviour, for possible causes see [[Firefox has just updated tab shows each time you start Firefox]].

  • ITunesStoreAustralia:why not allowed buy/rent HD content without Apple TV?

    Anyone know why in Australia, we are not allowed to purchase HD content without an Apple TV? I don't need an Apple TV with my laptop, and forthcoming Mac Mini, so why should I be forced to buy one just to get HD content from the store...

    Such restrictions usually are due to the copyright holders demand

  • Why not allowed log on

    Hi Anybody,
       when through the portal to run the report, system pop up a log on screen, when type in userID amd password,then hit enter, the system pop up log on screen again. it not allowed me log in. I tried it many times, still same, log on screen pop up aigain and again. Could some one tell me why?
    Thanks,
    Cherry

    Hi Cherry,
    Check the CAPS as it will be case sensitive.Make sure that password is not locked, Still problem persists ask basis person to reset your password.
    Hope this helps.......
    Rgs,
    Ravikanth.

  • Why not allow me to use my card?

    why doesnt allow me to use my debit card?

    I don't think that debit cards are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined. You can try contacting iTunes support but I don't think that you will be able to use a debit card : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • Why not allow Business Rule Design Transformer to overwrite existing BRDDs

    Hi,
    It can be quite annoying during development to continually having to remove the BRDD Trigger and PL/SQL Definition when running the BR Design Transformer reveals missing information in the BR Analysis definition. It seems that it would be practical to have at least the option to have the Business Rule Design Transformer overwrite an existing Business Rule Design Definition.
    You could think of an additional parameter in this utilily labeled "Overwrite existing BRDD?" with allowable values Y(es) and N(o) with No as default (so that the default functionality is the same as before).
    Below you find the code that can be added to the HSU_BRTR package to realize such a functional improvement. Maybe you can consider it for a next release...?!
    best regards,
    Lucas Jellema
    AMIS Services BV
    code to add to HSU_BRTR to provide a parameter that allows the user to specify whether or not the HSU_BRTR is allowed to overwrite an existing BRDD:
    in the revision history:
    09-jan-2003 Lucas Jellema
    6.5.2.3AMIS1.1 Added new parameter and supporting code that allows user to indicate
    whether existing Business Rule Design Definitions may be/should be overwritten
    at the end of procedure install
    hsu_install.add_parameter
    ( PACKAGE_NAME -- package name
    , 40 -- sequence
    , 'Overwrite existing BRDDs?' -- prompt
    , 'N' -- default value actual
    , 'No' -- default value displayed
    , 'Y' -- mandatory
    , 'N' -- allow multi-select
    , 'N' -- include shared elements
    , '' -- element type short name
    , '' -- sql expression actual
    , '' -- sql expression displayed
    , null -- where clause
    , null -- synchronize with
    , null -- foreign key column
    , -- help text
    'Choose whether you want this utility to overwrite existing Business Rule Design Definitions.'
    hsu_install.add_allowable_value
    ( PACKAGE_NAME -- package name
    , 40 -- parameter
    , 1 -- sequence
    , 'Y' -- actual value
    , 'Yes' -- displayed value
    hsu_install.add_allowable_value
    ( PACKAGE_NAME -- package name
    , 40 -- parameter
    , 2 -- sequence
    , 'N' -- actual value
    , 'No' -- displayed value
    --------6.5.2.3AMIS1.1
    Just before procedure transform_stage2
    procedure delete_brdds
    ( p_tbl_id in ci_table_definitions.id%type
    , p_br_name in varchar2
    -- Purpose Delete existing Business Rule Design Definition
    -- Usage from run procedure
    -- Remarks Find PL/SQl Module Definition based on Business Rule Label
    is
    cursor c_brdd
    ( b_tbl_id in ci_table_definitions.id%type
    , b_br_name in varchar2
    is
    select trg.id trg_id
    , trg.name name
    , plm.id plm_id
    from ci_database_triggers trg
    , ci_plsql_modules plm
    where trg.table_definition_reference = b_tbl_id
    and trg.plsql_module_reference = plm.id
    and plm.name = b_br_name
    begin
    -- loop over journalling busrules of this application
    <<brdd>>
    for r_brdd in c_brdd(p_tbl_id, p_br_name) loop
    -- delete busrule (delete of trigger is since 6i not enough anymore, so
    -- explicitly delete PL/SQL module also)
    bllog.write
    ( 'Deleting trigger '||r_brdd.name||' and PL/SQL module '
    ||hsu_name.get_name_and_path(r_brdd.plm_id)
    ||', a new business rule design definition overwrites this old one.'
    , bllog.information
    bltrg.del(r_brdd.trg_id);
    blplm.del(r_brdd.plm_id);
    end loop brdd;
    end delete_brdds;
    inside procedure transform_stage2
    (just before the comment: -- check if BRDD with this plm_name already exists)
    if p_overwrite_br = 'Y'
         then
    delete_brdds
    ( p_tbl_id => g_trg_tbl(i).tbl_id
    , p_br_name => l_plm_name
         end if; -- find_trg and overwrite =Y
    A new parameter in procedure transform_br_fun
    procedure transform_br_fun
    , p_overwrite_br in varchar2 default 'N' -- 6.5.2.3AMIS1.1
    use the parameter p_overwrite_br in the call to transform_stage2
    transform_stage2
    ( p_fun_id => p_fun_id
    , p_fun_label => r_fun.fun_function_label
    , p_fun_short_definition => r_fun.fun_short_definition
    , p_msg_prefix => p_msg_prefix
    , p_msg_language => p_msg_language
    , p_rule_type => l_rule_type
                   , p_overwrite_br => p_overwrite_br -- 6.5.2.3AMIS1.1
    new parameter p_overwrite_br in the procedure run
    NOTE: in both PACKAGE SPECIFICATION and BODY
    , p_overwrite_br in varchar2 default'N' -- 6.5.2.3AMIS1.1
    use the parameter p_overwrite_br in all calls to transform_br_fun inside procedure run
    transform_br_fun
    ( p_fun_id => r_fun_tree.id
    , p_msg_prefix => p_msg_prefix
    , p_msg_language => p_msg_language
    , p_create_att_usages => p_create_att_usages
    , p_overwrite_br => p_overwrite_br -- 6.5.2.3AMIS1.1

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Why not allow notes or a field for departments?

    It would be great if there was an option to allow notes for the Creative Cloud users.  Or even an optional field for departments.  When it comes time for billing in a large organization, it would make splitting the bill between departments much easier.

    FIXED!
    Had the same problem. AOL had been working for months, stopped working for no reason. I checked the settings against aol's instructions and the username was wrong - aol state that the username should not have the @aol.com suffix but it did. The next problem encountered was that the iPad would not let me change the username under outgoing smtp settings. Answer is to do the following:
    Go to settings -> mail ->aol account ->outgoing mail server.
    Turn the primary smtp server off.
    Create a new one for smtp.aol.com with the username without @aol.com at the end and your password.
    The rest of the settings should populate automatically.
    Good luck.

  • Snow Leopard 10.6.8 will not allow install Mountain Lion-why?

    I have Snow Leopard 10.6.8
    MacBook
    MacBook4,1
    However it will not allow me to download Mountain Lion...can anyone tell me why?
    Thank you!

    This is your computer
    Introduction Date:
    February 26, 2008*
    Discontinued Date:
    January 20, 2009
    Processors:
    1 (2 Cores)
    Geekbench:
    2827/3201*
    Processor Speed:
    2.1 GHz
    Processor Type:
    Core 2 Duo (T8100)
    Details:
    The Intel "Core 2 Duo" (T8100) 45 nm "Penryn" processor includes two independent processor "cores" on a single silicon chip. Also see: How much faster is the "Early 2008 Penryn" MacBook Core 2 Duo compared to the "Late 2007 Santa Rosa" MacBook Core 2 Duo?
    Custom Speeds:
    N/A
    Architecture:
    64-Bit
    Processor Upgrade:
    Soldered
    FPU:
    Integrated
    System Bus Speed:
    800 MHz
    Cache Bus Speed:
    2.1 GHz (Built-in)
    ROM/Firmware Type:
    EFI
    EFI Architecture:
    64-Bit
    L1 Cache:
    32k/32k
    L2/L3 Cache:
    3 MB (on chip)
    RAM Type:
    PC2-5300 DDR2
    Min. RAM Speed:
    667 MHz
    Details:
    Supports 667 MHz PC2-5300 DDR2 SDRAM. Also see: How do you upgrade the RAM in the MacBook? How much RAM of what type does it support?
    Standard RAM:
    1 GB
    Maximum RAM:
    6 GB*
    Details:
    1 GB of RAM is installed as two 512 MB modules, no slots free.  *Apple officially supports a maximum of 4 GB of RAM but third-parties have been able to upgrade the system to 6 GB of RAM using one 2 GB and one 4 GB memory module. In the US (and many other countries), site sponsor Other World Computing sells memory -- as well as other upgrades -- for this MacBook. In Canada, site sponsor The Mac Market sells memory and other upgrades for this MacBook. 
    Also see: Actual Max RAM of All G3 & Later Macs.
    Motherboard RAM:
    None
    RAM Slots:
    2
    Video Card:
    Intel GMA X3100
    VRAM Type:
    Integrated
    Details:
    Also see: How much faster is the Intel GMA X3100 graphics processor in later MacBook models compared to the Intel GMA 950 in earlier models? Is gaming performance improved?
    Standard VRAM:
    144 MB
    Maximum VRAM:
    144 MB
    Built-in Display:
    13.3" Widescreen
    Native Resolution:
    1280x800
    Details:
    13.3" color widescreen TFT active-matrix "glossy" display with a 1280 by 800 native resolution. Apple reports that it also supports "1152 by 720, 1024 by 768, 1024 by 640, 800 by 600, 800 by 500, 720 by 480, and 640 by 480 at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; [and] 720 by 480 at 3:2 aspect ratio".  Also see: What exactly is a glossy display? Is the glossy display used in the MacBook better or worse than the previous iBook display? Site sponsor Mission Repair offers free diagnosis of MacBook hardware problems and a 24-hour repair service for this MacBook. Display repacement, keyboard replacement, a hard drive upgrade service, and more are provided.
    2nd Display Support:
    Dual/Mirroring
    2nd Max. Resolution:
    1920x1200
    Details:
    The maximum resolution supported on an external display is 1920x1200.
    Standard Hard Drive:
    120 GB (5400 RPM)
    Int. HD Interface:
    Serial ATA (1.5 Gb/s)
    Standard Optical:
    8X "Combo Drive"*
    Standard Disk:
    None
    Details:
    Apple reports that this slot-loading "combo" drive (DVD-ROM/CD-RW) "reads DVDs at up to 8x speed, writes CD-R discs at up to 24x speed, writes CD-RW discs at up to 16x speed, [and] reads CDs at up to 24x speed." On October 14, 2008, Apple reconfigured this model with an 8X DL "SuperDrive". Also see: What are the capabilities of the optical drive provided by the MacBook models? Which can read and write dual-layer DVDs?
    Standard Modem:
    None
    Standard Ethernet:
    10/100/1000Base-T
    Standard AirPort:
    802.11a/b/g/n
    Standard Bluetooth:
    2.0+EDR
    USB Ports:
    2 (2.0)
    Firewire Ports:
    1 (400)
    Details:
    Two 480-Mbps USB 2.0 ports. One Firewire "400" port.
    Expansion Slots:
    None
    Expansion Bays:
    None
    Details:
    No expansion slots or bays provided.
    Incl. Keyboard:
    Full-size
    Incl. Input:
    Trackpad
    Case Type:
    Notebook
    Form Factor:
    MacBook
    Apple Order No:
    MB402LL/A*
    Apple Subfamily:
    Early 2008
    Apple Model No:
    A1181 (EMC 2242)
    Model ID:
    MacBook4,1
    Details:
    Please note that these identifiers refer to more than one model. 
    Also see: All Macs with the A1181 Model Number, the 2242 EMC Number, and the MacBook4,1 Model Identifier.  
    For more about these identifiers and how to locate them on each Mac, please refer to EveryMac.com's Mac Identification section.
    Battery Type:
    55 W h Li-Poly
    Battery Life:
    4.5 Hours
    Pre-Installed MacOS:
    X 10.5.2 (9C2015)
    Maximum MacOS:
    X 10.7.5*
    Minimum Windows:
    XP SP2 (32-Bit)*
    Maximum Windows:
    7 (32-Bit, 64-Bit)**
    MacOS 9 Support:
    None
    Windows Support:
    Boot/Virtualization
    Details:
    Also see: Are there any third-party programs to run Mac OS 9/Classic applications on Intel Macs? Site sponsor OHS specializes in heavily upgraded Macs capable of running both Mac OS X and Mac OS 9 applications. For more on running Windows on Intel Macs, please refer to the exhaustive Windows on Mac Q&A.
    Dimensions:
    1.08 x 12.78 x 8.92
    Avg. Weight:
    5.0 lbs (2.27 kg)
    Original Price (US):
    US$1099*
    Est. Current Retail:
    US$600-US$700

  • HT4972 Why 2nd generation IPod Touch is not allowed to update with newer IOS?

    Why 2nd generation ipod touch not allowed to update its OS to IOS 5 or later? This limitation made that IPod more or less useless as updated apps cannot be installed.

    Be sure to backup your current apps.  They can not be downloaded again,  Earlier iOS apps are becoming increasingly difficult to find.  You may want to look at VintApps, new in the Apple app store, that makes this much easier. 
    https://www.facebook.com/VintApps313
    Although there are thousands of available apps to choose from, they will definitively not be the latest greatest.
    I wrote my 99 cent app specifically to help solve this kind of problem.  I need to add that "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I can no longer edit the info for my songs, movies and tv shows.  This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10.  Why will the program not allow me to access the track info to edit it?

    I can no longer edit the info for my songs, movies and tv shows.  This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10.  Why will the program not allow me to access the track info to edit it?

    Ah yes school boy error there out of frustration and discontent..
    My issue is with music/apps/films etc not downloading from iTunes / App Store.
    They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
    However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
    I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
    Anyways I digress.
    So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
    At frustration station waiting for a train from pain...
    All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
    Answers in a postcard :-)
    Much love

  • Why metadata index shows up when i plug my ipod into the computer in itunes and how to avoid metadata index showing up it will not allow me to eject from itunes

    why metadata index shows up when i plug my ipod into the computer  in itunes and it will not allow me to eject my ipod from itunes

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • Why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    why does iTunes keep giving me bogus error messages.  "Your internet connection is not working, check your connection and try again."  My internet is working fine.  iTunes is not working and will not allow me to download tunes.

    This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
    I live in Europe ,So Be persistent and don't give up !  Aug. 2013

  • Why is it that Firefox v.14.0.1 will not allow me to Sign In to Microsoft Answers

    Here is a copy of an email I sent to Microsoft Answers :-
    Why is it that Firefox v.14.0.1 will not allow me to Sign In?
    I have successfully signed in with Google Chrome v.21.0.1180.79 m without any problem, but when I attempt the same thing in Firefox the following "Sign In" message appears:- "Signing in...
    This page will automatically update after you are signed in.
    If you are having problems, you can close this message and try to connect again."
    Reloading Firefox and using the same Page has no effect what-so-ever.
    Any ideas?
    lockhands.
    Their retort was:-
    "How is this related to Windows Update?
    How is this related to Microsoft?
    Ask in the Firefox forums:
    http://support.mozilla.org/en-US/questions"
    So I hope you can help me with this question, please.
    lockhands.

    i visit the same page and got the same message except the popup blocker was blocking the sign in page from loading.
    you could try using the following link to see if you can get to the login screen if it works you could add it as a bookmark until you find a solution.
    http://answers.microsoft.com/en-us/Site/StartSignIn?provider=wlid

  • Why I'm not allowed to create post in support of apple online?

    Trying to post a question, but seeing a message that I'm not allowed to do that, Why?
    Thanks

    You seem to have sucessfully posted here today:
    How to delete "Other" data on MacBok Air?
    Are you trying to make a different post?
    Understand the forums have been ill-behaved for several months since the major format change and we all see spurious error warnings  and occasional failures to post. Sometimes you have to wait a few minutes and try again.

Maybe you are looking for